Wettability of zirconia by feldspathic veneer in dental restorations: Effect of firing atmosphere and surface roughness
Source abstract
Abstract
Abstract Yttria-stabilized zirconia (YSZ) has been widely used in dental applications due to its excellent properties. However, chipping of fused feldspathic veneers on the zirconia cores is prone to limit the use of YSZ in all-ceramic dental restorations. The aim of this study was to investigate the effect of some processing parameters such as roughening the core surface and the atmosphere in which the feldspathic veneer was fused on the dental zirconia core. In order to address possible reasons of the chipping issue, the wetting behavior of a molten veneer on a zirconia core was evaluated using a sessile drop method at 990 °C for 0–120 min. The results showed the non-wetting behavior of the materials as the contact angles was measured to be >90 ° at conventional processing conditions. By varying some processing parameters such as surface roughening or firing atmosphere, it was found that these factors had huge effects on the wettability. The results showed that the melt veneer had little tendency to spread on the rougher zirconia surfaces. In addition, the firing of the feldspathic veneer in vacuum significantly decreased the wetting compared with that of in the air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Recycling and utilization of industrial and municipal waste in materials production · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Current status of zirconia-based fixed restorations10.2334/josnusd.52.531 ↗
2. Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic
3. Current status of zirconia restoration10.1016/j.jpor.2013.09.001 ↗
4. Application of zirconia in dentistry: biological, mechanical and optical considerations
5. Zirconia in dentistry: part 2. Evidence-based clinical breakthrough
6. All‐ceramic fixed partial dentures designed according to the DC‐Zirkon® technique. A 2‐year clinical study10.1111/j.1365-2842.2004.01437.x ↗
7. “The efficacy of posterior three-unit zirconium-oxide–based ceramic fixed partial dental prostheses: a prospective clinical pilot study10.1016/j.prosdent.2006.08.010 ↗
8. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures
9. Three-year clinical evaluation of two ceramic crown systems: a preliminary study10.1016/S0022-3913(10)60010-8 ↗
10. Failures in full crown retained dental bridges10.1038/sj.bdj.4805411 ↗
11. A meta‐analysis of durability data on conventional fixed bridges10.1111/j.1600-0528.1994.tb00795.x ↗
12. Meta-analysis of fixed partial denture survival: prostheses and abutments10.1016/S0022-3913(98)70162-3 ↗
13. Chipping fracture resistance of dental CAD/CAM restorative materials: part 2. Phenomenological model and the effect of indenter type10.1016/j.dental.2014.02.014 ↗
14. Chipping fracture resistance of dental CAD/CAM restorative materials: part I–Procedures and results10.1016/j.dental.2014.02.010 ↗
15. Microtensile bond strength of different components of core veneered all-ceramic restorations10.1016/j.dental.2005.03.013 ↗
16. Residual stresses in bilayer dental ceramics10.1016/j.biomaterials.2004.08.025 ↗
17. Zirconia bioceramics as all-ceramics crowns material: a review
18. Microtensile bond strength of different components of core veneered all-ceramic restorations Part II: Zirconia veneering ceramics10.1016/j.dental.2005.11.014 ↗
19. Clinical efficacy of veneered zirconium dioxide-based posterior partial fixed dental prostheses: five-year results10.1016/S0022-3913(12)60165-6 ↗
20. Schwartz · 2003
21. A review of adhesion science10.1016/j.dental.2009.11.157 ↗
22. Wetting characteristics of a nano Y-TZP dental ceramic by a molten feldspathic veneer10.1016/j.mspro.2015.11.038 ↗
23. Standard · 2006 · 2006
24. Z.H. Stout, K.J. Sullivan, P.J. Dong, W.P. Mainsah, E. Luo, N. Mathia, T, Development of methods for the characterisation of roughness in three dimensions, EN Comm. Eur. Communities Dissem. Sci. Tech. Knowl. Unit, vol. Publicatio, 1993.
25. R. Van Noort, M.E. Barbour, Introduction to Dental Materials: Elsevier Health Sciences, 2013.
26. Phase transformation and subsurface damage in 3Y-TZP after sandblasting10.1016/j.dental.2013.03.005 ↗
27. Mechanical properties of ultra-fine grained zirconia ceramics10.1007/BF00541576 ↗
28. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
29. Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina10.1016/S0022-3913(10)60056-X ↗
30. Bond strength of Y‐TZP–zirconia ceramics subjected to various surface roughening methods and layering porcelain10.1002/sia.3209 ↗
31. Influence of surface treatment on bond strength of veneering ceramics fused to zirconia10.4012/dmj.2011-163 ↗
32. Surface properties of dental zirconia after clinical grinding and polishing, in key engineering materials
33. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites10.4012/dmj.27.448 ↗