Influence of annealing temperature on the structural and anti-corrosion characteristics of sol–gel derived, spin-coated thin films
Source abstract
Abstract
Abstract Recently, an aqueous particulate sol–gel process using metallic chloride precursors was introduced to synthesize zirconium titanate. In this paper, the effect of annealing temperature on the structural and corrosion protection characteristics of spin-coated thin films obtained from this sol–gel system was investigated. Based on scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and spectroscopic reflectometry studies, it was found that the flatness and thickness of the thin films were decreased by increasing the annealing temperature. Also, the corrosion protection of stainless steel AISI 316L provided by the prepared coatings, as analyzed by electrochemical potentiodynamic polarization experiments in a simulated body fluid, was improved in this order: 500 °C-annealed sample
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Ultrafine microsphere particles of zirconium titanate produced by homogeneous dielectric-tuning coprecipitation10.1023/A:1025900804268 ↗
2. Deposition and characterization of ZrTiO4 thin films10.1002/sia.1865 ↗
3. Adhesion, friction, and deformation characteristics of Ti–(Ca,Zr)–(C,N,O,P) coatings for orthopedic and dental implants10.1134/S1063783406070146 ↗
4. Low-temperature synthesis of zirconium titanate10.1023/A:1017536029541 ↗
5. Preparation and characterization of zirconium titanate fibers with good high temperature performance10.1007/s10971-008-1877-y ↗
6. Porous zirconium titanate ceramics synthesized by sol–gel process10.1016/j.jeurceramsoc.2008.07.001 ↗
7. Aqueous sol–gel synthesis of zirconium titanate (ZrTiO4) nanoparticles using chloride precursors10.1016/j.ceramint.2012.04.064 ↗
8. Zirconium titanate thin film prepared by an aqueous particulate sol–gel spin coating process using carboxymethyl cellulose as dispersant
9. Multilayer zirconium titanate thin films prepared by a sol–gel deposition method10.1016/j.ceramint.2012.07.058 ↗
10. Nanostructured zirconium titanate fibers prepared by particulate sol-gel and cellulose templating techniques10.1016/j.jallcom.2013.03.142 ↗
11. Multilayer bioactive glass/zirconium titanate thin films for bone tissue engineering and regenerative dentistry10.2147/IJN.S42659 ↗
12. A new double-layer sol–gel coating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid10.1016/j.matlet.2013.01.111 ↗
13. Surface modification of stainless steel orthopedic implants by sol–gel ZrTiO4 and ZrTiO4–PMMA coatings10.1166/jbn.2013.1619 ↗
14. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
15. Structural, dielectric and ferroelectric properties of multilayer lithium tantalate thin films prepared by sol–gel technique10.1016/j.tsf.2010.10.016 ↗
16. Matthews · 1975 · 566
17. Anticorrosively enhanced PMMA–SiO2 hybrid coatings prepared from the sol–gel approach with MSMA as the coupling agent10.1016/j.surfcoat.2006.03.011 ↗