Speed effect on the material behavior in high-speed scratching of BK7 glass
Source abstract
Abstract
Abstract Scratch tests are often performed at a speed that is significantly lower than the real application like machining and grinding. However, brittle materials like BK7 behave very differently under high-speed conditions due to the more promising temperature and stain rate effects Therefore, it is important to study its material behavior under high-speed condition. In this study, single scratch tests and consecutive scratch tests were performed on BK7 under scratch speeds of 1, 5 and 20 m/s, which were much higher than the traditional scratch tests. The surface morphology as well as the subsurface cracks of the scratch grooves was inspected under AFM and FIB-SEM. The thermal effect that caused the changes in ductile-brittle transition (DBT) and scratch morphology was simulated and explained by a thermal-stress coupled finite element analysis. Finally, the changes in material removal behavior as well as the crack initiation mechanism due to speed effect was revealed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Effects of wheel speed on surface/subsurface damage characteristics in grinding of glass-ceramics10.1016/j.ceramint.2020.04.076 ↗
2. Evaluation of grinding-induced subsurface damage in optical glass bk710.1016/j.jmatprotec.2015.11.003 ↗
3. Ceramic response to high speed grinding10.1081/MST-120034240 ↗
4. An investigation of high speed grinding with electroplated diamond wheels10.1016/S0007-8506(07)62938-2 ↗
5. Influence of grinding parameters on glass workpieces surface finish using response surface methodology10.1115/1.4004317 ↗
6. A new analytical model for estimation of scratch-induced damage in brittle solids10.1111/j.1551-2916.2006.01471.x ↗
7. Investigation of grinding modes in horizontal surface grinding of optical glass BK710.1016/j.jmatprotec.2011.05.006 ↗
8. Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching10.1016/j.ceramint.2017.05.054 ↗
9. Evaluation of grinding-induced subsurface damage in optical glass BK710.1016/j.jmatprotec.2015.11.003 ↗
10. Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding10.1016/j.ijmachtools.2015.01.003 ↗
11. Subsurface damage in grinding of brittle materials considering machining parameters and spindle dynamics10.1007/s00170-018-2191-7 ↗
12. Investigation of subsurface damage considering the abrasive particle rotation in brittle material grinding10.1007/s00170-016-9567-3 ↗
13. Controlled material removal mode and depth of micro cracks in precision grinding of fused silica – A theoretical model and experimental verification
14. Subsurface damage in high-speed grinding of brittle materials considering kinematic characteristics of the grinding process10.1007/s00170-015-7627-8 ↗
15. The ‘skin effect’ of subsurface damage distribution in materials subjected to highspeed machining10.1088/2631-7990/ab103b ↗
16. Plasticity and fracture of inorganic glasses at high speed grinding
17. Subsurface damage mechanisms at high-speed ductile machining of optical glasses10.1016/0141-6359(91)90100-W ↗
18. Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions10.1016/j.ijmachtools.2016.07.007 ↗
19. Dependence of material removal on crystal orientation of sapphire under cross scratching10.1016/j.jeurceramsoc.2017.01.032 ↗
20. Evolution of material removal modes of sapphire under varied scratching depths
21. Unique crack behaviors of glass bk7 occurred in successive double scratch under critical load of median crack initiation10.1016/j.jeurceramsoc.2020.02.049 ↗
22. Quantitative evaluation of indentation-induced densification in glass10.1557/jmr.2005.0418 ↗
23. Effect of scratch direction on densification and crack initiation of optical glass BK710.1016/j.ceramint.2020.03.251 ↗