Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles
Source abstract
Abstract
Abstract The laser sintering mechanism of composites based on magnesia and oxide nanoparticles was studied in terms of nanoparticle concentration and laser energy fluence. Iron oxide and aluminum oxide nanoparticles were mechanically mixed with magnesia (MgO) powder (5, 7 and 10 wt%) and the compacted pellets were irradiated with the fundamental output (1064 nm) of a pulsed Nd:YAG laser at 2.5 and 3.0 J/cm2. Crystal structure, elemental composition and morphology were characterized by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. X-ray diffraction results confirmed the crystalline phases and spinel formation by addition of oxide nanoparticles and laser sintering. X-ray photoelectron spectroscopy analysis confirmed their surface composition and chemical states of the corresponding elements. Morphological changes were observed due to the laser fluence and the oxide nanoparticle concentrations. Results show that a coarsening mechanism was predominant with a high energy fluence and concentration of oxide nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Luminescence Properties of Advanced Materials · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Verdeja · 2008
2. Solar synthesis of calcium aluminates10.1016/j.solener.2018.07.012 ↗
3. Concentrated solar energy applications in materials science and metallurgy10.1016/j.solener.2018.05.065 ↗
4. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
5. The effects of particle size on microwave heating of metal and metal oxide powders10.1016/j.powtec.2014.02.008 ↗
6. Effects of microwave sintering in aging resistance of zirconia-based ceramics10.1016/j.cep.2017.03.002 ↗
7. The effect of microwave sintering on the microstructure and properties of calcium phosphate ceramic10.1016/j.proche.2016.03.044 ↗
8. Laser sintering of unimodal distributed glass powders of different size10.1016/j.proeng.2015.01.180 ↗
9. Laser sintering process of ceramic powders: the effect of particle size on the mechanical properties of sintered layers
10. Laser sintering of ceramics10.1016/j.jascer.2013.08.004 ↗
11. Direct laser sintering of metal powders: mechanism, kinetics and microstructural features10.1016/j.msea.2006.04.117 ↗
12. Selective laser melting of iron-based powder10.1016/j.jmatprotec.2003.11.051 ↗
13. Selective laser melting of aluminium components10.1016/j.jmatprotec.2010.09.019 ↗
14. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
15. Laser sintering of magnesia with nanoparticles of iron oxide and aluminum oxide10.1016/j.apsusc.2014.09.140 ↗
16. Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: effect of processing conditions and powder properties10.1016/j.jmatprotec.2013.03.009 ↗
17. Structural characterization of pulsed laser-deposited hydroxyapatite film on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
18. Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts10.1016/j.jeurceramsoc.2011.02.020 ↗
19. Process of selective laser sintering of polymer powders: modeling, simulation, and validation10.1016/j.crme.2018.08.002 ↗
20. Laser sintering of polyamides and other polymers10.1016/j.pmatsci.2011.04.001 ↗
21. Selective laser melting of polymer powder – part mechanics as function of exposure speed10.1016/j.phpro.2015.11.047 ↗
22. Lasers and materials in selective laser sintering10.1108/01445150310698652 ↗
23. Progress in additive manufacturing and rapid prototyping10.1016/S0007-8506(07)63240-5 ↗
24. Selective laser sintering: a qualitative and objective approach10.1007/s11837-003-0175-y ↗
25. Binding mechanisms in selective laser sintering and selective laser melting10.1108/13552540510573365 ↗
26. Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures10.1016/j.phpro.2014.08.154 ↗
27. Alumina–zirconium ceramics synthesis by selective laser sintering/melting10.1016/j.apsusc.2007.09.001 ↗
28. Ceramic components manufacturing by selective laser sintering10.1016/j.apsusc.2007.08.085 ↗
29. Additive manufacturing of zirconia parts by indirect selective laser sintering10.1016/j.jeurceramsoc.2013.07.023 ↗
30. Effect of MgAl2O4 nanoparticles addition on the densification and properties of MgO-CaO refractories10.1016/j.ceramint.2017.01.011 ↗
31. Addition impact of nano-carbon black on the performance of MgO.CaO compounds10.1016/j.ceramint.2017.12.195 ↗
32. Densification and properties of ZrO2 nanoparticles added magnesia-doloma refractories10.1016/j.ceramint.2016.07.021 ↗
33. Effect of addition of Al2O3 and Fe2O3 nanoparticles on the microstructural and physico-chemical evolution of dense magnesia composite10.1016/j.ceramint.2015.02.107 ↗
34. Impact of titania nanoparticles addition on the microstructure and properties of MgO-C refractories10.1016/j.ceramint.2017.08.094 ↗
35. MgO-CaO-Cr2O3 composition as a novel refractory brick: use of Cr2O3 nanoparticles10.1016/j.bsecv.2016.11.002 ↗
36. Nano- and micrometre additions of SiO2, ZrO2 and TiO2 in fine grained alumina refractory ceramics for improved thermal shock performance10.1016/j.ceramint.2011.10.036 ↗
37. Performance improvement of MgO-C refractory bricks by the addition of Nano-ZrSiO410.1016/j.matchemphys.2017.09.055 ↗
38. The impact of trivalent oxide nanoparticles on the microstructure and performance of magnesite-dolomite refractory bricks10.1016/j.matchemphys.2017.03.001 ↗
39. The influence of silica nanoparticles addition on the physical, mechanical, thermo-mechanical as well as microstructure of Mag-Dol refractory composites10.1016/j.ceramint.2017.09.073 ↗
40. Performance improvement of MgO-CaO refractories by the addition of nano-sized Al2O310.1016/j.matchemphys.2017.06.026 ↗
41. The impact of ZrSiO4 nanoparticles addition on the microstructure and properties of dolomite based refractories10.1016/j.ceramint.2017.07.122 ↗
42. Study on low carbon containing MgO-C refractory: use of nano carbon10.1016/j.ceramint.2011.10.086 ↗
43. An insight into the effect of zinc oxide nanoparticles on the structural, thermal, mechanical properties and antimicrobial activity of Cs/PVA composite10.1016/j.colsurfa.2019.123821 ↗
44. Selective laser sintering of porous silica enabled by carbon additive10.3390/ma10111313 ↗
45. Spark plasma sintering of Sm3+ doped Y2O3 transparent ceramics for visible light lasers10.1016/j.ceramint.2017.06.059 ↗
46. Kehl · 1949
47. Chemical synthesis of nanocrystalline magnesium aluminate spinel via nitrate–citrate combustion route10.1016/j.jallcom.2007.07.101 ↗
48. A novel approach to synthesis of nanosize MgAl2O4 spinel powder through sol–gel citrate technique and subsequent heat treatment10.1016/j.ceramint.2008.03.011 ↗
49. Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose process10.1016/j.materresbull.2007.05.031 ↗
50. Synthesis of MgAl2O4 spinel nanoparticles using a mixture of bayerite and magnesium sulfate10.1007/s11051-009-9739-2 ↗
51. Technology of chromium and its ferroalloys
52. Densification and properties of Fe2O3 nanoparticles added CaO refractories10.1016/j.ceramint.2016.04.173 ↗
53. Schacht · 2004
54. Effect of micro and nano-Al2O3 addition on the microstructure and properties of MgO-C refractory ceramic composite10.1016/j.matchemphys.2016.12.068 ↗
55. Hybridization of sugar alcohols into brucite interlayers via a melt intercalation process10.1016/j.jcis.2011.11.048 ↗
56. XPS and AFM investigations of annealing induced surface modifications of MgO single crystals10.1016/S0022-0248(02)00852-7 ↗
57. Initial surface film on magnesium metal: a characterization by X-ray photoelectron spectroscopy (XPS) and photocurrent spectroscopy (PCS)10.1016/j.electacta.2007.03.019 ↗
58. One-pot synthesis of MgFe2O4 nanospheres by solvothermal method10.1016/j.matlet.2013.01.023 ↗
59. Preparation of carbon-coated MgFe2O4 with excellent cycling and rate performance10.1016/j.electacta.2012.11.128 ↗
60. The electronic structure of magnesium hydroxide (brucite) using X-ray emission, X-ray photoelectron, and Auger spectroscopy10.1039/dt9780001791 ↗
61. Cation distribution in NixMg1−xFe2O4 studied by XPS and Mössbauer spectroscopy10.1016/j.ssc.2005.10.019 ↗
62. Effect of curve fitting parameters on quantitative analysis of Fe0.94O and Fe2O3 using XPS10.1016/j.elspec.2006.02.002 ↗
63. The electronic structure of magnesium dialuminium tetraoxide (spinel) using X-ray emission and X-ray photoelectron spectroscopies10.1039/dt9780001785 ↗
64. Nature of the active sites in Ni/MgAl2O4-based catalysts designed for steam reforming of ethanol10.1016/j.jcat.2013.05.036 ↗
65. Influence of Mg addition on the catalytic activity of alumina supported Ag for C3H6-SCR of NO10.1007/s10562-009-9895-0 ↗
66. ESCA studies of aluminophosphate molecular sieves10.1021/j100153a045 ↗
67. Au on MgAl2O4 spinels: the effect of support surface properties in glycerol oxidation10.1016/j.jcat.2010.07.022 ↗