Influence of CoO glass–ceramic coating on the anti-oxidation behavior and thermal shock resistance of 200 stainless steel at elevated temperature
Source abstract
Abstract
Abstract A CoO glass–ceramic was coated on 200 stainless steel and its thermal shock resistance and anti-oxidation effect were detected at 600–1250 °C in ambient air. This coating was prepared by a slurry method and it exhibited fairly good adhesion, oxidation resistance and stability at elevated temperature. Specifically, its thermal shock resistance and anti-oxidation effect were detected. The coating optimized was prepared by a slurry–thermal reaction. Metalloscope, SEM-EDX, and XRD revealed that a stable glass–ceramic layer was formed during the coating process which acted as a perfect film with the thermal cycles and prevented the 200 stainless steel from being oxidized. In the thermal cycle process, the glass–ceramic film was non-stripping with good CTE (coefficient of thermal expansion) match between coating and the steel. This low-cost and facile operating method can be used widely in stainless steel protection at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Ho¨land · 2012
2. A bright future for glass–ceramics
3. Review. Functional glasses and glass–ceramics derived from iron rich waste and combination of industrial residues10.1016/j.jnoncrysol.2012.12.006 ↗
4. Reduced wear of enamel with novel fine and nano-scale leucite glass–ceramics10.1016/j.jdent.2013.02.006 ↗
5. Bioactive ceramics: processing, structures and properties10.1007/s10853-011-6063-x ↗
6. Apatite-and wollastonite-containing glass–ceramics for prosthetic application
7. Optical active nano-glass–ceramics10.1111/ijag.12023 ↗
8. Tatsumisago · 2014 · 65
9. Low temperature sintering of fluorapatite glass–ceramics10.1016/j.dental.2013.10.009 ↗
10. The evolution of technology for light metals over the last 50 years: Al, Mg, And Li10.1007/s11837-007-0020-9 ↗
11. Kinetics and mechanism of silicothermic reduction process of calcined dolomite in magnetherm reactor10.1016/j.minpro.2013.11.016 ↗
12. Influence of ceramic coating of MgO on oxidation behavior and descaling ability of low alloy steel10.1016/j.surfcoat.2012.02.055 ↗
13. Preparation and properties of anti-oxidation inorganic nano-coating for low carbon steel at an elevated temperature
14. Protecting stainless steel by glass coating during slab reheating10.1016/j.surfcoat.2010.12.036 ↗
15. Corrosion protection of 316L stainless steel by a TiO2 nanoparticle coating prepared by sol–gel method10.1016/j.tsf.2005.05.016 ↗
16. Improvement in corrosion resistance of the 316l stainless steel by means of Al2O3 coatings deposited by the sol–gel method10.1016/S0040-6090(99)00230-8 ↗
17. Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol–gel route on stainless steel10.1016/j.surfcoat.2013.06.037 ↗
18. Surface hardness improvement of plasma-sprayed AISI 316L stainless steel coating by low-temperature plasma carburizing10.1016/j.apt.2012.12.011 ↗
19. Study of the microstructure of NiCr splats plasma sprayed on to stainless steel substrates by TEM
20. Recent developments in the preparation, characterization and applications of glass- and glass–ceramic-to-metal seals and coatings10.1007/s10853-010-5095-y ↗
21. Preparation, properties and chemistry of glass- and glass–ceramic-to-metal seals and coatings10.1007/BF00354689 ↗
22. Glass–ceramic coatings10.4028/www.scientific.net/KEM.99-100.203 ↗
23. Thermal shock characteristics of plasma sprayed mullite coatings10.1361/105996398770350710 ↗
24. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
25. Effect of chromia and alumina coatings on the high-temperature behaviour of F17Ti stainless steel in air: effect of a rare earth element oxide10.1016/0257-8972(95)02689-4 ↗
26. Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties10.1016/j.ssi.2004.10.004 ↗
27. Cobalt plating of high temperature stainless steel interconnects10.1016/j.jpowsour.2006.03.024 ↗
28. Effects of chromia coatings on the high-temperature behavior of F17Ti stainless steel in air. Effect of rare-earth-element oxides10.1007/BF01682371 ↗
29. Analysis of residual stresses in thermal barrier coatings
30. Study of cracking and spalling of Cr2O3 scale formed on Ni–30Cr alloy10.1007/BF00666390 ↗
31. A thermal shock fatigue study of type 304 and 316 stainless steels10.1111/j.1460-2695.1981.tb01119.x ↗
32. Preparation and properties of metal oxide coatings with high emissivity on stainless steel