Properties of gas detonation ceramic coatings and their effect on the osseointegration of titanium implants for bone defect replacement
Source abstract
Abstract
Abstract An optimal performance of bone implants with bioceramic coatings is closely related to the surface modification technology. For the first time, we have evaluated a gas detonation deposition (GDD) approach to obtain biocompatible ceramic coatings based on bioglass (BG) and calcium phosphates on Ti-based alloys as prospective materials towards their application for the development of bone implants. For the production of the coatings, hydroxyapatite (HA), HA metal-substituted (containing Ag+, Cu2+, or Zn2+) and tricalcium phosphate (TCP) were synthesized and characterized. Pure powders and their combination with BG were used to obtain coatings on a Ti–6Al–4V alloy using the developed automatized GDD setup. The microstructure, phase and chemical composition of the produced coatings were studied using XRD, SEM-EDS and Raman spectroscopy. The produced coated materials were evaluated in vivo in Wistar rats to analyze a reparative osteogenesis over a period of 12 weeks. The results regarding the optimization of the GDD method indicate its high productivity, as confirmed by high deposition rates. The highest deposition rate was observed for the coatings obtained from the HA metal-substituted powders. The results revealed a partial transformation of a HA phase to an α-TCP phase during the deposition, with a prevalence of the HA-phase in the coatings. According to the histological evaluation, the reparative osteogenesis occurs through the perimeter of the titanium implants, whereas the regeneration level increases from the 4th to the 12th week. The highest osteointegration level was detected for the implants coated with a biocomposite consisting of BG, HA and TCP. The results of the current study demonstrate an effectiveness of the GDD method to produce biocompatible coatings on Ti-based alloys. This provides excellent prerequisites towards the application and standardization of the GDD technology to manufacture bone implants for bone fixation and defect replacement, as well as the development of dental implants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Enhanced osseointegration of titanium implants in a rat model of osteoporosis using multilayer bone mesenchymal stem cell sheets
2. Effect of low-level mechanical vibration on osteogenesis and osseointegration of porous titanium implants in the repair of long bone defects10.1038/srep17134 ↗
3. Vitro and in vivo evaluation of titanium surface modification for biological aging by electrolytic reducing ionic water10.3390/app9040713 ↗
4. Relationship between osteoinductive characteristics of biocomposite material and physicochemical characteristics of coating10.1007/s10517-010-0826-2 ↗
5. Surface properties and bioactivity of TiO2 nanotube array prepared by two-step anodic oxidation for biomedical applications10.1098/rsos.181948 ↗
6. Interfaces in analogue biomaterials10.1016/S1359-6454(98)80035-9 ↗
7. The excessive loss of Branemark fixtures in type IV bone: a 5-year analysis10.1902/jop.1991.62.1.2 ↗
8. The promotion of osseointegration of titanium surfaces by coating with silk protein sericin10.1016/j.biomaterials.2013.01.019 ↗
9. Vitro and in vivo osteogenic activity of titanium implants coated by pulsed laser deposition with a thin film of fluoridated hydroxyapatite
10. Synthesis and in vitro evaluation of electrodeposited barium titanate coating on Ti6Al4V10.4103/2228-7477.181034 ↗
11. Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting10.1016/j.msec.2017.03.066 ↗
12. In vitro study of electrodeposited fluoridated hydroxyapatite coating on G-II titanium with a nanostructured TiO2 interlayer10.1088/1748-605X/aa6264 ↗
13. Efficacy of a mineralized collagen bone-grafting material for peri-implant bone defect reconstruction in mini pigs10.1093/rb/rby029 ↗
14. Hierarchically biomimetic bone scaffold materials: nano-HA/collagen/PLA composite10.1002/jbm.b.20035 ↗
15. Osteogenesis and morphology of the peri-implant bone facing dental implants10.1100/tsw.2004.211 ↗
16. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: a review paper10.1016/j.ijadhadh.2013.09.030 ↗
17. Calcium orthophosphates as bioceramics: state of the art10.3390/jfb1010022 ↗
18. Electrodeposition of Sr-substituted hydroxyapatite on low modulus beta-type Ti-45Nb and effect on in vitro Sr release and cell response10.1016/j.msec.2019.110425 ↗
19. Using scratch testing to measure the adhesion strength of calcium phosphate coatings applied to poly(carbonate urethane) substrates10.1016/j.jmbbm.2011.10.010 ↗
20. The preparation of calcium phosphate coatings on titanium and nickel–titanium by rf-magnetron-sputtered deposition: composition, structure and micromechanical properties10.1016/j.surfcoat.2008.01.038 ↗
21. Deposition methods for microstructured and nanostructured coatings on metallic bone implants: a review10.1155/2017/5812907 ↗
22. Review of functionally graded thermal sprayed coatings10.3390/app10155153 ↗
23. Nanocomposite coatings: thermal spray processing, microstructure and performance10.1179/1743280414Y.0000000048 ↗
24. Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings10.1016/j.biomaterials.2003.08.008 ↗
25. Nanostructured titania/hydroxyapatite composite coatings deposited by high velocity oxy-fuel (HVOF) spraying10.1016/j.msea.2006.12.090 ↗
26. Interfacial strength of plasma-sprayed hydroxyapatite coatings10.1007/s11666-020-01041-6 ↗
27. Adhesion strength of plasma-sprayed hydroxyapatite coatings on laser gas-nitrided pure titanium10.1016/j.surfcoat.2009.03.034 ↗
28. Direct morphological comparison of vacuum plasma sprayed and detonation gun sprayed hydroxyapatite coatings for orthopaedic applications10.1016/S0142-9612(98)00166-5 ↗
29. In vitro fatigue behaviour of vacuum plasma and detonation gun sprayed hydroxyapatite coatings10.1016/S0142-9612(00)00273-8 ↗
30. High temperature in-situ XRD of plasma sprayed HA coatings10.1016/S0142-9612(01)00116-8 ↗
31. Properties of the hydroxyapatite coatings, obtained by gas-detonation deposition onto titanium substrates
32. The effect of heat treatment on the morphology of D-Gun sprayed hydroxyapatite coatings10.1002/(SICI)1097-4636(1999)48:6<861::AID-JBM15>3.0.CO;2-H ↗
33. The effect of the granulometric composition of a hydroxyapatite powder on the structure and phase composition of coatings deposited by the detonation gas spraying technique10.1007/s11182-013-9957-z ↗
34. On using of gas detonation for spraying of biocompatible films onto the carbon nanocomposites
35. Phase composition and structure of composite Ti/HA coatings synthesized by detonation spraying
36. Wear performance of hydroxyapatite coatings deposited on AISI 304L using detonation gun spray
37. Structure of biocompatible coatings produced from hydroxyapatite nanoparticles by detonation spraying10.1186/s11671-015-1160-4 ↗
38. Porous biomorphic silicon carbide ceramics coated with hydroxyapatite as prospective materials for bone implants10.1016/j.msec.2016.05.113 ↗
39. O.A. Buryanov, V.S. Chroniy, V.V. Protsenko, N.I. Klyui, L.I. Tsabiy, I.V. Zatovsky, Larionov, O. P., V.P. Temchenko, The Method for Replacement of Big Defects of Tubular Bone and Joints by Methal Endoprostheses Covered by Bio-active Compounds, Patent of Ukraine #125739, 25.05.2018, published 25.05.2018, bulletin #10.
40. Deposition of bioactive and bioinert ceramic coatings on magnesium using detonation
41. Copper(II), zinc(II) and copper(II)/zinc(II)-containing carbonate-substituted hydroxyapatite: synthesis, characterization and thermal behaviour10.1002/mawe.201600460 ↗
42. In vitro antibacterial evaluation of sol-gel-derived Zn-, Ag-, and (Zn + Ag)-doped hydroxyapatite coatings against methicillin-resistant Staphylococcus aureus10.1002/jbm.a.34322 ↗
43. Zinc-substituted hydroxyapatite: a biomaterial with enhanced bioactivity and antibacterial properties10.1007/s10856-012-4817-x ↗
44. Textural, structural and biological evaluation of hydroxyapatite doped with zinc at low concentrations10.3390/ma10030229 ↗
45. Novel continuous flow synthesis, characterization and antibacterial studies of nanoscale zinc substituted hydroxyapatite bioceramics10.1016/j.ica.2016.07.041 ↗
46. Synthesis and antimicrobial activity of mesoporous hydroxylapatite/zinc oxide nanofibers10.1016/j.matdes.2015.08.004 ↗
47. Silver-containing hydroxyapatite coating reduces biofilm formation by methicillin-resistant Staphylococcus aureus in vitro and in vivo
48. Laser fabrication of Ag-HA nanocomposites on Ti6Al4V implant for enhancing bioactivity and antibacterial capability10.1016/j.msec.2016.08.059 ↗
49. Antimicrobial activity and biocompatibility of Ag+- and Cu2+-doped biphasic hydroxyapatite/α-tricalcium phosphate obtained from hydrothermally synthesized Ag+- and Cu2+-doped hydroxyapatite10.1016/j.apsusc.2014.04.066 ↗
50. First clinical experience with thermal-sprayed silver oxide-containing hydroxyapatite coating implant10.1016/j.arth.2015.12.034 ↗
51. Hydroxyapatite-based materials for potential use in bone tissue infections
52. Trivalent chromium incorporated in a crystalline calcium phosphate matrix accelerates materials degradation and bone formation in vivo10.1016/j.actbio.2018.01.010 ↗
53. Characterization by Fourier transform infrared spectroscopy of hydroxyapatite co-doped with zinc and fluoride10.1016/j.ceramint.2013.03.029 ↗
54. Synthesis, characterization and modelling of zinc and silicate co-substituted hydroxyapatite10.1098/rsif.2015.0190 ↗
55. Sol–gel synthesis and characterization of Sr/Mg, Mg/Zn and Sr/Zn co-doped hydroxyapatites10.1016/j.matlet.2014.11.078 ↗
56. Substituted hydroxyapatites for biomedical applications: a review10.1016/j.ceramint.2015.03.316 ↗
57. N.I. Klyui, L.I. Tsabiy, O.E. Belyaev, O.P. Slepkin, V.P. Temchenko, V.B. Lozinskii, A.N. Klyui, The Method for Biocompatible Coatings Formation, Patent of Ukraine #141537, 30.10.2019, bulletin #7.
58. Studying the elastic properties and adhesive strength of plasma-sprayed double-layer coatings during tensile tests10.1007/s11106-015-9677-8 ↗
59. Use of isopropyl alcohol in histological assays: dehydration of tissue, enbessing into paraffin, and processing of paraffin sections10.1023/A:1026017719668 ↗
60. A review of adhesion test methods for thin hard coatings10.1116/1.573616 ↗
61. The current state-of-the-art in scratch testing of coated systems10.1016/j.surfcoat.2019.125092 ↗
62. Preparation, characterization, and thermal transformation of poorly crystalline sodium- and carbonate-substituted calcium phosphate10.1002/ejic.201402761 ↗
63. Preparation of micro/nano-structure copper-substituted hydroxyapatite scaffolds with improved angiogenesis capacity for bone regeneration10.3390/ma11091516 ↗
64. Synthesis of hydroxyapatite by hydrolysis of α-Ca3(PO4)210.1007/s11172-005-0220-9 ↗
65. Functionalization of hydroxyapatite ceramics: Raman mapping investigation of silanization10.3390/ceramics2020029 ↗
66. Synthesis, characterization and catalytic properties of copper-substituted hydroxyapatite nanocrystals10.1016/j.materresbull.2017.09.056 ↗
67. Raman spectroscopic evidence for octacalcium phosphate and other transient mineral species deposited during intramembranous mineralization10.1016/j.bone.2006.02.059 ↗
68. Octacalcium phosphate - a metastable mineral phase controls the evolution of scaffold forming proteins10.1039/C5TB00673B ↗
69. Nature of some features in Raman spectra of hydroxyapatite-containing materials10.1002/jrs.4883 ↗
70. Understanding peri-implant endosseous healing10.1002/j.0022-0337.2003.67.8.tb03681.x ↗
71. Implant surface characteristics and their effect on osseointegration10.1038/sj.bdj.2015.171 ↗
72. Osseointegration of titanium implants with different rough surfaces: a histologic and histomorphometric study in an adult minipig model10.1097/ID.0000000000000560 ↗
73. Formation of blood clot on biomaterial implants influences bone healing10.1089/ten.teb.2013.0709 ↗
74. Cationic substitutions in hydroxyapatite: current status of the derived biofunctional effects and their in vitro interrogation methods10.3390/ma11112081 ↗