Metallization of Al2O3 ceramic with Mg by friction stir spot welding
Source abstract
Abstract
Abstract The surfaces of Al2O3 ceramic plates were metallized with by a friction stir spot welding method. Tensile tests revealed that the adhesive strength between the Mg film and Al2O3 ceramic plate was 23.3 MPa. To investigate the origin of this strong adhesion, the interface structure was examined by X-ray diffraction, scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, and transmission electron microscopy. The results indicated the formation of a microcrystalline MgO layer at the interface. Furthermore, the surfaces of two metallized Al2O3 ceramic plates separated by Ni foil were bonded together by hot pressing at 1100 °C for 180 min under vacuum. The resulting cross tensile strength of the bonding was 2.1 MPa, indicating strong adhesion between the Al2O3 ceramic plates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Microstructure and seal strength relation in the Molybdenum Manganese glass metallization of alumina ceramics10.1016/0025-5416(85)90190-9 ↗
2. Fracture behavior and reliability of brazed alumina joints via Mo-Mn process and active metal brazing10.1557/JMR.2000.0321 ↗
3. Microstructural characterizations of the 316 stainless steel-alumina joining by a modified Moly-Manganese process and brazing10.4028/www.scientific.net/AMR.189-193.3339 ↗
4. Influence of ceramic substrate porosity and glass phase content on the microstructure and mechanical properties of metallized ceramics via an activated Mo-Mn method10.1016/j.ceramint.2019.12.052 ↗
5. Microstructure evolution during air bonding of Al2O3 to Al2O3 joints using bismuth–borate–zinc glass10.1016/j.jeurceramsoc.2017.04.002 ↗
6. Dunn · 2016
7. Sealing pure alumina ceramics to metals
8. Study of copper thick film metallization on aluminum nitride10.1016/j.scriptamat.2019.09.029 ↗
9. Properties of power electronic substrates based on thick printed copper technology10.1016/j.mee.2016.10.019 ↗
10. Effect of copper- and silver-based films on alumina substrate electrical properties10.1016/j.ceramint.2017.11.107 ↗
11. Estimation of thermal expansion coefficient of silicate glasses with compositional parameter10.2320/jinstmet1952.62.5_444 ↗
12. The interfacial restructuring to amorphous: a new adhesion mechanism of cold-sprayed coatings at the interface between Fe coatings and Al substrate10.1016/j.matlet.2016.03.132 ↗
13. Interfacial metal/ceramic bonding mechanism for metallization of ceramics via cold spraying10.1016/j.jmatprotec.2020.116845 ↗
14. Mechanical metallization of alumina substrate through shot impact treatment10.1016/j.jeurceramsoc.2013.08.022 ↗
15. Rainer Gadow, Selective laser induced autocatalytic metallization of NiO and Cr2O3 doped alumina zirconia ceramic substrates10.1016/j.jeurceramsoc.2020.01.026 ↗
16. Interface microstructure observation for welds of an alumina ceramics and an aluminum alloy with friction stir spot welding10.2109/jcersj2.18106 ↗
17. Lap joint formed by friction stir spot welding between SiC and magnesium alloy containing aluminum10.1016/j.ceramint.2019.11.266 ↗
18. Characteristics and mechanism of Cu films fabricated at room temperature by aerosol deposition10.1186/s11671-016-1378-9 ↗
19. Activation spot joining between aluminum alloy and high-strength steel sheets using friction surfacing
20. Chaplot · 2010