Electrical properties, EPR analyses and defect chemistry of Mn-doped 0.675PMN-0.325PT piezoceramics
Source abstract
Abstract
Abstract The morphotropic phase boundary solid solution of 0.675Pb(Mg1/3Nb2/3)O3-0.325PbTiO3 (0.675PMN-0.325PT) were studied. Manganese (Mn) was used as a dopant element in 0.4 mol% and 0.7 mol% ratios because of its multiple oxidation states. Sintering was done either in the air or under an oxygen-rich atmosphere. Both the effect of doping and sintering atmosphere on the electrical properties were reported. The ceramic with 0.4 mol% were exhibited higher properties such as piezoelectric charge coefficient (d33), dielectric constant, polarization values compared to undoped and 0.7 mol% Mn-doped ceramics. Electron paramagnetic resonance (EPR) spectroscopy was used to resolve the oxidation state of Mn in the 0.675PMN-0.325PT structure. The electrical properties were discussed and explained using defect chemistry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Low-temperature sintering of MnO2-doped PZT–PZN Piezoelectric ceramics10.1007/s10832-007-9174-7 ↗
2. Densification behaviors and piezoelectric properties of MnO 2 SiO 2 -doped Pb(Ni 1/3 Nb 2/3)O 3 –PbTiO 3 –PbZrO 3 ceramics10.1557/JMR.1993.3184 ↗
3. Role of secondary phase in high power piezoelectric PMN-PZT ceramics10.1111/j.1551-2916.2011.04891.x ↗
4. Piezoelectric properties and temperature stability of Mn-doped Pb(Mg 1/3 Nb 2/3)-PbZrO 3 -PbTiO 3 textured ceramics
5. Mn-doping effect on dielectric and electromechanical losses in the system Pb(ZrxTi1−x)O3–Pb(Zn1/3Nb2/3)O310.1007/s10853-007-2051-6 ↗
6. High power resonance characteristics and dielectric properties of Co-substituted 0.92Pb(Zn 1/3 Nb 2/3)O 3 –0.08PbTiO 3 single crystal10.1143/JJAP.42.531 ↗
7. Processing, texture quality, and piezoelectric properties of <001> C textured (1-x)Pb(Mg 1/3 Nb 2/3)TiO 3 - xPbTiO 3 ceramics10.1063/1.3603045 ↗
8. Substituent-introduction of “hard” polarization characteristics in “soft” Pb(BIBII)O3–PbTiO3 ferroelectric ceramics10.1063/1.1351864 ↗
9. Morphotropic phase boundary in Pb (Mg13Nb23) O3-PbTiO3 system10.1016/0167-577X(89)90115-8 ↗
10. Phase diagram of the ferroelectric relaxor (1−x)PbMg1/3Nb2/3O3−xPbTiO310.1103/PhysRevB.66.054104 ↗
11. Electromechanical properties of relaxor ferroelectric lead magnesium niobate-lead titanate ceramics10.1143/JJAP.34.5658 ↗
12. Effect of composition on the electromechanical properties of (1-x)Pb(Mg1/3Nb2/3)O3−XPbTiO3 ceramics10.1111/j.1151-2916.1997.tb02927.x ↗
13. Effect of annealing atmosphere on domain structures and electromechanical properties of Pb(Zn1/3Nb2/3)O3-based ceramics10.1063/1.1402653 ↗
14. Phase formation, microstructure and phase transition of lead barium titanate ceramics: effect of PbO content10.1080/00150190902873501 ↗
15. Piezoelectric and ferroelectric properties of Cu-doped K 0.5 Na 0.5 NbO 3 lead-free ceramics10.1088/0022-3727/41/4/045401 ↗
16. Electron paramagnetic resonance and Raman spectroscopy studies on carbon-doped MgB 2 superconductor nanomaterials10.1063/1.4918608 ↗
17. Investigation of Mn-doped sodium-potassium niobate ((K,Na)NbO3) ceramics by EPR and impedance spectroscopic methods
18. Processing and properties of textured potassium strontium niobate (KSr 2 Nb 5 O 15) ceramic fibers-effect of texture on the electrical properties10.1109/TUFFC.2013.2795 ↗
19. Processing and properties of textured potassium sodium niobate [K,Na]NbO 3 ceramic ribbons by alginate gelation method10.1111/jace.13139 ↗
20. Fabrication of textured lead-free strontium barium niobate (SBN61) bulk ceramics and their electrical properties10.1016/j.jeurceramsoc.2016.03.014 ↗
21. Influence of compositional variation on the electrical properties of [Pb(Zn 1/3 Nb 2/3)O 3]–[Pb(Zr,Ti)O3] ceramics and their transducer application10.1109/TUFFC.2018.2829800 ↗
22. Enhancement of electrical properties in the ternary PMN–PT–PZ through compositional variation, crystallographic texture, and quenching10.1111/jace.16919 ↗
23. Enhanced soft character of crystallographically textured Mn-doped binary 0.675[Pb(Mg1/3Nb2/3)O3]–0.325[PbTiO3] ceramics10.1007/s11664-018-6563-4 ↗
24. Solid-state reactivity of the ZnO-xMn2O3 system during heat treatment10.1111/j.1551-2916.2005.00903.x ↗
25. Ferromagnetism-to-Paramagnetism transition in the ZnMnO system10.3938/jkps.52.1398 ↗
26. Vibrational and electron paramagnetic resonance spectroscopic studies of β-MnO2 and α-K MnO2 nanorods10.1016/j.jallcom.2017.09.015 ↗
27. Electron paramagnetic resonance in MnO2 powders and comparative estimation of electric characteristics of power sources based on them in the MnO2–Zn system10.1016/S0378-7753(02)00595-5 ↗
28. Moulson · 2003
29. Effect of MnO2 on the piezoelectric properties of the 0.75Pb(Zr0.47Ti0.53)O3-0.25Pb(Zn1/3Nb2/3)O3 ceramics10.1111/j.1551-2916.2010.03888.x ↗
30. Grain size and domain size relations in bulk ceramic ferroelectric materials10.1016/0022-3697(96)00019-4 ↗