Wear-resistant Ti–Al–Ni–C–N coatings produced by magnetron sputtering of SHS-targets in the DC and HIPIMS modes
Source abstract
Abstract
Abstract The hard wear-resistant nanocomposite Ti–Al–Ni–C–N coatings were deposited by direct current magnetron sputtering (DCMS) and high power impulse magnetron sputtering (HIPIMS) in the Ar, Ar+15%N2, and Ar+25%N2 atmospheres. The structure of coatings was analyzed using the X-ray diffraction analysis, glow discharge optical emission spectroscopy, and scanning electron microscopy. Mechanical and tribological properties were measured using the nanoindentation and scratch testing as well as by tribological testing using the “pin-on-disc” scheme. Electrochemical corrosion resistance and oxidation resistance of coatings were investigated. The results suggest that the coatings are based on the FCC phases TiCN and Ni3Al with crystallites size ~3 and ~15 nm, correspondingly. DCMS coatings with optimal composition were characterized by hardness 34 GPa, stable friction coefficient
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Application of coatings for tooling Quo Vadis 2005?
2. Mechanical and structural properties of various alloyed TiAlN-based hard coatings10.1016/j.surfcoat.2005.02.065 ↗
3. Oxidation resistance of titanium–aluminium–silicon nitride coatings10.1016/S0257-8972(03)00407-9 ↗
4. Investigation into adhesive wear of PVD coated and uncoated hot stamping production tools10.1016/j.wear.2013.07.003 ↗
5. High-performance coatings for cutting tools10.1016/j.cirpj.2016.11.004 ↗
6. The structure and toughness of TiN coatings prepared by modulated pulsed power magnetron sputtering10.1016/j.vacuum.2015.12.020 ↗
7. Self-lubricating Ti–C–N nanocomposite coatings prepared by double magnetron sputtering10.1016/j.solidstatesciences.2008.10.017 ↗
8. Comparison for mechanical properties between TiN and TiAlN coating layers by AIP technique10.1016/S0924-0136(02)00746-X ↗
9. Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review10.1016/S0921-5093(02)00259-9 ↗
10. Comparative investigation of TiAlC(N), TiCrAlC(N), and CrAlC(N) coatings deposited by sputtering of МАХ-phase Ti2−хCrхAlC targets10.1016/j.surfcoat.2009.05.036 ↗
11. Effect of carbon on TiAlCN coatings deposited by reactive magnetron sputtering10.1016/j.surfcoat.2008.06.175 ↗
12. Tribological properties and thermal stability of TiAlCN coatings deposited by ICP-assisted sputtering10.1016/j.surfcoat.2013.04.041 ↗
13. Decomposition routes and strain evolution in arc deposited TiZrAlN coatings10.1016/j.jallcom.2018.11.039 ↗
14. Microstructure and mechanical properties of TiZrAlN nanocomposite thin films by CFUBMS10.1016/j.tsf.2007.08.056 ↗
15. Effect of Ta content on microstructure, hardness and oxidation resistance of TiAlTaN coatings10.1016/j.ijrmhm.2016.04.014 ↗
16. Influence of Al content on microstructure, mechanical and tribological properties of Ti-W-Al-N composite films10.1016/j.vacuum.2016.11.004 ↗
17. Thermal stability and chemical resistance of (Ti,Al)N-Cu and (Ti,Al)N-Ni metal-ceramic nanostructured coatings10.1016/j.apsusc.2016.06.106 ↗
18. Wear behaviour of wear-resistant adaptive nano-multilayered Ti-Al-Mo-N coatings10.1016/j.apsusc.2016.06.102 ↗
19. Super- and ultrahard nanacomposite coatings: generic concept for their preparation, properties and industrial applications10.1016/S0042-207X(02)00229-4 ↗
20. Anders · 2010 · 466
21. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
22. A comparison of the properties of titanium-based films produced by pulsed and continuous DC magnetron sputtering10.1016/S0257-8972(03)00356-6 ↗
23. The structure and mechanical properties of Ti-Si-B coatings deposited by DC and pulsed-DC unbalanced magnetron sputtering10.1002/ppap.200731706 ↗
24. Tribological behaviour of pulsed magnetron sputtered CrB2 coatings examined by reciprocating sliding wear testing against aluminium alloy and steel10.1016/j.surfcoat.2007.06.057 ↗
25. Wear-resistant Ti–Al–Si–C–N coatings produced by magnetron sputtering of SHS targets10.3103/S106782121304007X ↗
26. Hard turning of hot work and cold work steels with HiPIMS and DCMS TiAlN coated carbide inserts10.1016/j.procir.2016.03.231 ↗
27. Microstructural and electrochemical comparison between TiN coatings deposited through HIPIMS and DCMS techniques10.1016/j.jallcom.2017.11.162 ↗
28. Influences of target poisoning on the mechanical properties of TiCrBN thin films grown by a superimposed high power impulse and medium-frequency magnetron sputtering10.1016/j.surfcoat.2017.06.081 ↗
29. Comparative analysis of Cr–B coatings deposited by magnetron sputtering in DC and HIPIMS modes10.1134/S1063785014070219 ↗
30. Tribological development of TiCN coatings by adjusting the flowing rate of reactive gases10.1016/j.jpcs.2015.11.009 ↗
31. Properties and performance of commercial TiCN coatings. Part 2: tribological performance10.1016/S0257-8972(02)00651-5 ↗
32. Hard a-Si3N4/MeNx nanocomposite coatings with high thermal stability and high oxidation resistance10.4028/www.scientific.net/SSP.127.31 ↗
33. Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications10.1016/S0257-8972(03)00911-3 ↗
34. Raman microscopic studies of PVD hard coatings10.1016/S0257-8972(99)00072-9 ↗
35. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
36. Microstructural, mechanical and tribological analysis of nanocomposite Ti–C–N coatings deposited by industrial-scale DC magnetron sputtering10.1016/j.surfcoat.2014.02.033 ↗
37. Growth, microstructure, and mechanical properties of arc evaporated TiCxN1−x (0≤x≤1) films10.1016/S0257-8972(00)00518-1 ↗
38. Microstructure and mechanical properties of multilayer Ti(C, N) films by closed-field unbalanced magnetron sputtering ion plating10.1016/S1005-0302(10)60019-9 ↗
39. Effect of Al addition on structure and properties of sputtered TiC films10.1002/ppap.200730102 ↗
40. Ti–Ni–C nanocomposite coatings evaluated in a sliding electrical contact application10.1016/j.surfcoat.2015.06.016 ↗
41. Microstructure and mechanical properties of reactive sputtered nanocrystalline Ti-Al-Ni-N thin films10.1016/j.surfcoat.2016.11.079 ↗
42. Multifunctional nanolaminated PVD coatings in the system Ti–Al–N–C by combination of metastable fcc phases and nanocomposite microstructures10.1016/j.surfcoat.2005.11.012 ↗
43. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
44. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
45. Effect of Cr interlayer on the adhesion and corrosion enhancement of nanocomposite TiN-based coatings deposited on stainless steel 41010.1016/j.tsf.2010.12.020 ↗
46. Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater10.1016/j.surfcoat.2013.03.034 ↗
47. Comparative study of Ti-C-Ni-Al, Ti-C-Ni-Fe, and Ti-C-Ni-Al/Ti-C-Ni-Fe coatings produced by magnetron sputtering, electro-spark deposition, and a combined two-step process10.1016/j.ceramint.2018.01.187 ↗