Microstructure and mechanical properties of Ti3SiC2/Ti3SiC2 diffusion bonded joints using Ti foil as an interlayer
Source abstract
Abstract
Abstract Diffusion bonded joints of Ti3SiC2 ceramic without or with a Ti foil were fabricated. The effects of temperature, holding time and Ti foil thickness on the microstructural evolution and mechanical properties of Ti3SiC2/Ti/Ti3SiC2 joints were systematically investigated. Compared with the case of direct diffusion joints, the Ti3SiC2/Ti/Ti3SiC2 joint was obtained at 1000 °C and the bonding temperature reduced by 150 °C. The typical microstructure of the Ti3SiC2/Ti/Ti3SiC2 joints obtained at 1100 °C with a 60-μm thick Ti foil for 60 min consisted of Ti3SiC2/Ti5Si3Cx/TiSi/Ti5Si4/TiAl2/TiAl/ Ti3Al/α-Ti/Ti3Al/TiAl/TiAl2/Ti5Si4/TiSi/Ti5Si3Cx/Ti3SiC2 layers in that order. The formation sequence of the diffusion layer at the joint was TiAl2→TiSi→Ti5Si3→ Ti5Si4→TiAl→Ti3Al. Upon changing the bonding temperature from 1000 to 1150 °C, the thickness of the Ti foil from 0 to 120 μm and the holding time from 30 to 120 min, the shear strength first increased and then decreased. The shear strength of the Ti3SiC2/Ti/Ti3SiC2 joint at 1100 °C for 60 min under 20 MPa reached 174 ± 4 MPa, which was 1.87 times that of the direct diffusion joint under the same experimental conditions. The results of Vickers microhardness measurements showed that the Ti5Si4 and TiSi compounds exhibited the highest microhardness of 853 ± 43HV. The fractures caused by Ti5Si4 and TiSi propagated into the Ti5Si3Cx, Ti3SiC2 and Ti–Al diffusion layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Barsoum · 1996
2. High temperature ion irradiation effects in MAX phase ceramics10.1016/j.actamat.2015.11.055 ↗
3. Fabrication of Ti3SiC2 and Ti4SiC3 MAX phase ceramics through reduction of TiO2 with SiC10.1016/j.ceramint.2017.08.180 ↗
4. The MN+1AXN phases: a new class of solids: Thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
5. Elastic properties and phonon conductivities of Ti3Al(C0.5,N0.5)2 and Ti2Al(C0.5,N0.5) solid solutions10.1557/JMR.2008.0200 ↗
6. Microstructures and properties of amorphous, polycrystalline, and Mn+1AXn-phase Ti–Al–N films synthesized from an Mn+1AXn-phase Ti2AlN compound target10.1016/j.ceramint.2018.11.067 ↗
7. Role of the X and n factors in ion-irradiation induced phase transformations of Mn+1AXn phases10.1016/j.actamat.2017.11.008 ↗
8. Radiation tolerance of Mn+1AXn phases, Ti3AlC2 and Ti3SiC210.1016/j.actamat.2010.04.029 ↗
9. Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites10.1016/j.ceramint.2019.03.144 ↗
10. Contact-reactive brazing of Ti3SiC2 ceramic to TC4 alloy using a Ni interlayer: interfacial microstructure and joining properties10.1016/j.ceramint.2018.04.006 ↗
11. Die Kristallstruktur von Ti3SiC2—ein neuer Komplexcarbid-Typ10.1007/BF00899949 ↗
12. Microstructure and mechanical strength of transient liquid phase bonded Ti3SiC2 joints using Al interlayer10.1016/j.jeurceramsoc.2007.01.012 ↗
13. Design of reinforced interfacial structure in brazed joints of C/C composites and Nb by pre-oxidation surface treatment combined with in situ growth of CNTs10.1016/j.carbon.2018.11.047 ↗
14. Diffusion bonding of TiAl intermetallic and Ti3AlC2 ceramic: interfacial microstructure and joining properties10.1016/j.matdes.2013.10.074 ↗
15. Interfacial microstructure and joining properties of TiAl/Ti3AlC2 diffusion bonded joints using Zr and Ni foils as interlayer10.1016/j.vacuum.2013.10.024 ↗
16. Interfacial study of NiTi–Ti3SiC2 solid state diffusion bonded joints10.1016/j.msea.2014.10.033 ↗
17. Li · 2011
18. Yin · 2006
19. Phase and morphology evolution in high-temperature Ti3SiC2–NiTi diffusion-bonded joints10.1016/j.scriptamat.2011.04.015 ↗
20. Substitution behavior of Si atoms in the Ti2AlC ceramics10.1016/j.actamat.2017.11.002 ↗
21. Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: interfacial microstructure and mechanical properties10.1016/j.matdes.2014.01.029 ↗
22. Direct diffusion bonding of Ti3SiC2 and Ti3AlC210.1016/j.materresbull.2008.12.002 ↗
23. An investigation on diffusion bonding of TZM alloy and Nb-Zr alloy using Ni foil as an interlayer10.1016/j.jallcom.2018.01.162 ↗
24. Diffusion bonding technology of a titanium alloy to a stainless steel web with an Ni interlayer10.1016/S1044-5803(99)00008-X ↗
25. Diffusion bonding of Ti2AlNb alloy using pure Ti foil as an interlayer10.1016/j.jallcom.2018.04.324 ↗
26. Surface characterization and growth mechanism of laminated Ti3SiC2 crystals fabricated by hot isostatic pressing10.1016/j.apsusc.2010.05.012 ↗
27. Effect of Al on the synthesis of Ti3SiC2 by reactively sintering Ti–SiC–C powder mixtures10.1016/j.jallcom.2006.08.079 ↗
28. Bio-inspired modification of silicon carbide foams for oil/water separation and rapid power-free absorption towards highly viscous oils10.1016/j.ceramint.2018.03.196 ↗
29. Reactive synthesis of porous nanolaminate Ti3(Si,Al)C2 intermetallic compound10.1016/j.matchemphys.2017.12.076 ↗
30. Interfacial microstructure and mechanical properties of TC4/Ti3SiC2 contact-reactive brazed joints using a Cu interlayer10.1016/j.ceramint.2018.08.328 ↗
31. Microstructural evolution and growth kinetics of interfacial compounds in TiAl/Ti3SiC2 diffusion bonding joints10.1016/j.msea.2019.04.034 ↗
32. An approach to employ titanium-bearing blast-furnace slag to prepare Ti and Al–Si alloys10.1016/j.jallcom.2018.08.077 ↗