Analyses of Young's modulus and thermal expansion coefficient of sintered porous alumina compacts
Source abstract
Abstract
Abstract This paper reports the derivation of Young's modulus ( E ) and thermal expansion coefficient (TEC, β ) for a sintered porous structure with open pores. The theoretical E is affected by the number of grains and the grain boundary area in sintered ceramics. The measured E –porosity relationship for porous alumina compacts were compared with the theoretical E values that were derived for the present open-pore structure and also for the dispersed (closed)-pore structure treated previously. With decreasing porosity (50% → 10%), the scattered E values showed a gradually increasing tendency, which were located between two theoretical curves for the open-pore structure. The sudden increase of E values in the porosity range from 10% to 0% was well explained by the theoretical dependence of E on porosity for the open- or closed-pore structure. The β values for the porous alumina structures were independent of porosity and close to the β values reported for fully dense alumina compacts. This result was in accordance with the theoretical β –porosity relationships for the open-pore and closed-pore structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Compressive mechanical properties of porous alumina compacts10.1016/j.ceramint.2013.07.153 ↗
2. Sintering of alumina powder compacts and their compressive mechanical properties10.1016/j.ceramint.2015.05.109 ↗
3. Theoretical prediction of compressive strength, Young's modulus and strain at fracture of sintered porous alumina compacts10.1016/j.ceramint.2015.10.087 ↗
4. Compressive mechanical properties of partially sintered porous alumina of bimodal size system10.1016/j.ceramint.2016.10.149 ↗
5. Representation of thermal conductivity of solid material with particulate inclusion10.1016/j.ceramint.2009.03.038 ↗
6. Theoretical analysis of thermal conductivity of graphite-containing refractory brick
7. Theoretical and experimental analyses of thermal conductivity of the alumina–mullite system10.1016/j.jeurceramsoc.2014.09.034 ↗
8. Theoretical and experimental analyses of relationship between processing and thermal conductivity of SiC with oxide additives10.1016/j.ceramint.2016.05.156 ↗
9. Mixing rules of Young's modulus, thermal expansion coefficient and thermal conductivity of solid material with particulate inclusion10.4191/kcers.2016.53.1.43 ↗
10. Representation of thermal expansion coefficient of solid material with particulate inclusion10.1016/j.ceramint.2014.10.085 ↗
11. Theoretical and experimental analyses of Young's modulus and thermal expansion coefficient of the alumina-mullite system10.1016/j.ceramint.2016.07.216 ↗
12. Theoretical analyses of thermal shock and thermal expansion coefficients of metals and ceramics10.1016/j.ceramint.2014.09.042 ↗
13. Japanese Industrial Standard R 1634, Test methods for density and apparent porosity of fine ceramics, Japanese Industrial Standards Committee, Tokyo, 1998.
14. Touloukian · 1977 · 176