Mechanical properties at nanometric scale of alumina layers formed in sulphuric acid anodizing under burning conditions
Source abstract
Abstract
A mechanical study (hardness, H and Young's modulus, E) at nanometric scale of the distribution of mechanical properties across the surface of porous anodic alumina (PAA) films formed during aluminium anodizing in sulphuric acid under burning conditions is presented. Statistical methods have been employed to extract the mechanical properties of the protruding oxide structures (POS) observed in the burning areas and the results have been compared with those obtained from the standard PAA (S-PAA) of the non-burning areas. The results indicated that H and E of the POS are 3.8 ± 0.3 and 80 ± 4 GPa, respectively, while those of the S-PAA are 6.8 ± 0.5 and 125 ± 8 GPa. Thus, the hardness and Young's modulus of POS are factors of about 1.6–1.8 times lower than those of S-PAA, indicating that POS have lower mechanical properties associated with their different chemical composition and structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Advanced ceramic materials synthesis · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 75 years of sulphuric acid anodizing10.1080/00202967.2002.11871463 ↗
2. Sheasby · 2001 · vol. 1
3. Decorative and protective finishes produced on aluminium by hard anodizing10.1080/00202967.1965.11869953 ↗
4. Influence of local heat development on film thickness for anodizing aluminum in sulfuric acid10.1149/1.1560639 ↗
5. Self-ordering of anodic porous alumina induced by local current concentration: burning10.1149/1.1738553 ↗
6. Controlling factor of self-ordering of anodic porous alumina10.1149/1.1767838 ↗
7. Study of initiation and development of local burning phenomena during anodizing of aluminium under controlled convection10.1016/j.electacta.2008.08.004 ↗
8. Experimental study and modelling of anodizing of aluminium in a wall-jet electrode set-up in laminar and turbulent regime10.1016/j.corsci.2008.12.001 ↗
9. Control of the electrode temperature for electrochemical studies: a new approach illustrated on porous anodizing of aluminium10.1016/j.elecom.2009.10.013 ↗
10. Comparison between the influence of applied electrode and electrolyte temperatures on porous anodizing of aluminium10.1016/j.electacta.2010.02.044 ↗
11. Anodizing of aluminium under applied electrode temperature: process evaluation and elimination of burning at high current densities10.1016/j.surfcoat.2010.02.031 ↗
12. Local burning phenomena in sulfuric acid anodizing: analysis of porous anodic alumina layers on AA105010.1149/1.3478482 ↗
13. An improve technique for determining hardness and elastic modulus using load and displacement sensing indentation technique10.1557/JMR.1992.1564 ↗
14. Fischer-Cripps · 2002
15. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature10.1126/science.1067453 ↗
16. On the use of nanoindentation for cementitious materials10.1007/BF02479557 ↗
17. Nanoindentation analysis as a two-dimensional tool for mapping mechanical properties of complex surfaces10.1557/jmr.2009.0149 ↗
18. The nanogranular nature of C–S–H10.1016/j.jmps.2006.06.003 ↗
19. Grid indentation analysis of composite microstructure and mechanics: principles and validation10.1016/j.msea.2006.05.125 ↗
20. Mechanical characterization at nanometric scale for heterogeneous graphite–salt phase change materials with a statistical approach
21. Hardness and Young's modulus distribution in atmospheric plasma sprayed WC-Co coatings using nanoindentation10.1016/j.surfcoat.2011.03.012 ↗
22. Influence of the aluminum surface on the final results of a two-step anodizing10.1016/j.surfcoat.2006.12.003 ↗
23. WSxM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
24. Determination of hardness, Young's modulus of YBCO samples textured by the Bridgman technique10.1088/0957-4484/18/38/385701 ↗
25. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
26. Nanoindentation of multilayered epitaxial YBa2Cu3O7−δ thin films and coated conductors10.1016/j.tsf.2010.12.101 ↗
27. Statistical indentation techniques for hydrated nanocomposites: concrete, bone and shale10.1111/j.1551-2916.2007.02012.x ↗
28. Mechanical properties of highly ordered nanoporous anodic alumina membranes
29. Mechanical properties of amorphous anodic alumina and tantala films using nanoindentation10.1088/0957-4484/13/4/302 ↗
30. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
31. The correlation of the indentation size effect measured with indenters of various shapes10.1016/S0022-5096(01)00103-X ↗
32. Determination of hardness, Young's modulus and fracture toughness of lanthanum tungstates as novel proton conductors10.1016/j.ceramint.2011.01.002 ↗