Laminated HfC–SiC ceramics produced by aqueous tape casting and hot pressing
Source abstract
Abstract
Abstract Laminated HfC–SiC ceramics with graphite interlayer were successfully produced by aqueous tape casting, laminating and hot pressing, and the properties of slurries, microstructure and mechanical properties were studied in detail. The tape casting slurries exhibit a typical shear-thinning behavior. The flexural strength of the laminated HfC–SiC/graphite ceramics in perpendicular to the lamination direction slightly decreases compared with that of the monolithic HfC–SiC ceramics because of the presence of the weak graphite interlayer. However, the fracture toughness and work of fracture of the laminated HfC–SiC/graphite ceramics in perpendicular to the lamination direction can reach 9.09±0.51 MPa m 1/2 and 1037±86 J/m 2 , which are approximately 2.2 times and 20.3 times higher than those of the monolithic HfC–SiC ceramics, respectively. The synergy of multiple toughening mechanisms, crack deflection, crack bifurcation, delamination crack and the pull out of the matrix layer leads to fairly high toughness and work of fracture of the laminated HfC–SiC/graphite ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Ablation tests on HfC- and TaC-based ceramics for aeropropulsive applications10.1016/j.jeurceramsoc.2014.11.018 ↗
2. Ablation behaviors of ultra-high temperature ceramic composites10.1016/j.msea.2007.02.040 ↗
3. Processing and properties of ultra-high temperature ceramics for space applications10.1016/j.msea.2007.08.054 ↗
4. Oxidation of hafnium carbide and titanium carbide single crystals with the formation of carbon at high temperatures and low oxygen pressures10.1111/j.1151-2916.2000.tb01265.x ↗
5. High-density pressureless-sintered HfC-based composites10.1111/j.1551-2916.2006.01109.x ↗
6. Sintering mechanisms of zirconium and hafnium carbides doped with MoSi210.1111/j.1551-2916.2009.03049.x ↗
7. Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials10.1016/j.jeurceramsoc.2007.11.021 ↗
8. Pressureless sintering of hafnium carbide–silicon carbide ceramics10.1111/jace.12339 ↗
9. Mechanical, thermal and oxidation properties of refractory hafnium and zirconium compounds10.1016/S0955-2219(99)00129-6 ↗
10. Densification and mechanical behavior of HfC and HfB2 fabricated by spark plasma sintering10.1111/j.1551-2916.2007.02248.x ↗
11. Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder10.1016/j.jeurceramsoc.2010.10.036 ↗
12. The fabrication and mechanical properties of bionic laminated ZrB2–SiC/BN ceramic prepared by tape casting and hot pressing10.1016/j.scriptamat.2011.07.031 ↗
13. Control of composition and structure in laminated silicon nitride/boron nitride composites10.1111/j.1151-2916.2002.tb00480.x ↗
14. Laminar ceramic composites10.1016/0955-2219(95)93055-8 ↗
15. Multilayer ceramic composites with high failure resistance10.1016/j.jeurceramsoc.2006.04.030 ↗
16. Multilayer Al2O3/SiC ceramics with improved mechanical behavior10.1016/S0955-2219(00)00048-0 ↗
17. Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC–ZrB2–ZrC10.1016/j.corsci.2013.11.019 ↗
18. Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C–SiC–ZrC composites10.1016/j.corsci.2013.12.017 ↗
19. Simple way to make tough ceramics10.1038/347455a0 ↗
20. Design and production of ceramic laminates with high mechanical resistance and reliability10.1016/j.actamat.2006.06.019 ↗
21. Preparation of homogeneous B4C ceramics with high toughness by tape casting10.1016/j.msea.2012.04.020 ↗
22. Improvement of mechanical properties of Al2O3/Ti3SiC2 multilayer ceramics by adding SiC whiskers into Al2O3 layers10.1016/j.ceramint.2005.10.007 ↗
23. Laminated object manufacturing of preceramic-paper-derived Si–SiC composites10.1002/adma.200700789 ↗
24. Damage resistance and R-curve behavior of multilayer Al2O3/SiC ceramics10.1016/S0272-8842(00)00020-1 ↗
25. Fracture resistance behavior of multilayered silicon nitride10.1111/j.1151-2916.1997.tb02931.x ↗
26. Al2O3/TiC/(MoSi2+Mo2B5) multilayer composites prepared by tape casting10.1016/S0955-2219(99)00031-X ↗
27. Laminated ZrB2–SiC/graphite ceramics with simultaneously improved flexural strength and fracture toughness10.1016/j.ceramint.2013.08.070 ↗
28. Fabrication and characterization of a carbon fibre reinforced carbon-silicon carbide-titanium silicon carbide hybrid matrix composite10.1016/j.msea.2009.08.069 ↗
29. Method to make tough Ti2AlC/Al2O3- and Ti3AlC2/Al2O3-laminated composites10.1111/j.1551-2916.2010.03989.x ↗
30. Preparation of TiC ceramics through aqueous tape casting10.1016/j.ceramint.2004.06.017 ↗
31. Crack deflection and propagation in layered silicon nitride/boron nitride ceramics10.1111/j.1151-2916.1998.tb02438.x ↗