Surface texture of substrates prepared by femtosecond laser for improving the thermal cycle life of TBCs
Source abstract
Abstract
Abstract In this study, a substrate was surface textured using a femtosecond laser to prolong the service life of thermal barrier coatings (TBCs). The selected texture showed linear and diamond shapes. The effect of the texture shape on the thermal shock resistance of the TBCs was investigated by subjecting them to thermal shock cycles. The microstructure and composition of the TBCs were investigated using various characterisation methods. The mechanical properties of the TBCs were measured using the microindentation method. Based on the theory of elastoplastic mechanics, a three-dimensional finite element numerical model was established to analyse the effect of the two textures on the stress distribution of the TBCs. The results revealed that the linear-textured TBCs showed improved stress concentration at the coating interface when the coatings expanded or shrank, which resulted in an improvement in their thermal shock resistance. Therefore, the linear-textured TBCs showed excellent oxidation resistance, fracture toughness, and heat resistance as compared to the diamond-textured TBCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Laser Material Processing Techniques · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Detecting internal hot corrosion of in-service turbine blades using neutron tomography with Gd tagging10.1007/s10921-014-0244-x ↗
2. Solid‐state CMAS corrosion of an EB‐PVD YSZ coated turbine blade: Zr4+ partitioning and phase evolution10.1111/jace.13241 ↗
3. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
4. Microstructural characterization of GZ/CYSZ thermal barrier coatings after thermal shock and CMAS+ hot corrosion test10.1016/j.jeurceramsoc.2017.02.004 ↗
5. Mechanics-based scaling laws for the durability of thermal barrier coatings10.1016/S0079-6425(00)00007-4 ↗
6. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
7. Delamination of multilayer thermal barrier coatings10.1016/S0167-6636(99)00016-2 ↗
8. On the delamination of thermal barrier coatings in a thermal gradient10.1016/S0257-8972(01)01451-7 ↗
9. The influence of imperfections on the nucleation and propagation of buckling driven delaminations10.1016/S0022-5096(99)00050-2 ↗
10. An experimental investigation on thermo-mechanical buckling delamination failure characteristic of air plasma sprayed thermal barrier coatings10.1016/j.surfcoat.2006.11.025 ↗
11. Enhancement of strain tolerance of functionally graded LaTi2Al9O19 thermal barrier coating through ultra-short pulse based laser texturing10.1016/j.surfcoat.2016.07.018 ↗
12. Thermal shock resistance and laser rapid prototyping of thermal barrier coatings with network structures
13. The effect of interface roughness and oxide film thickness on the inelastic response of thermal barrier coatings to thermal cycling10.1016/S0921-5093(00)00750-4 ↗
14. Analytical modeling of oxide thickness effects on residual stresses in thermal barrier coatings10.1016/S1359-6462(99)00430-3 ↗
15. Modeling of the effect of Al2O3 interlayer on residual stress due to oxide scale in thermal barrier coatings10.1016/S0257-8972(01)01545-6 ↗
16. Mechanisms controlling the performance and durability of thermal barrier coatings10.4028/www.scientific.net/KEM.197.199 ↗
17. The surface cracking behavior in air plasma sprayed thermal barrier coating system incorporating interface roughness effect10.1016/j.apsusc.2011.08.103 ↗
18. Influences of interface morphology and thermally grown oxide thickness on residual stress distribution in thermal barrier coating system10.1016/j.ceramint.2016.02.049 ↗
19. Crack propagation modeling on the interfaces of thermal barrier coating system with different thickness of the oxide layer and different interface morphologies10.1016/j.matdes.2011.05.039 ↗
20. Influence of interface morphology on erosion failure of thermal barrier coatings10.1016/j.ceramint.2018.08.188 ↗
21. Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy10.1016/j.jmatprotec.2009.05.031 ↗
22. DD6 single-crystal superalloy with thermal barrier coating in femtosecond laser percussion drilling10.1016/j.optlastec.2020.106555 ↗
23. Advantages of picosecond laser machining for cutting-edge technologies10.1016/j.phpro.2013.03.091 ↗
24. Robust hierarchical porous PTFE film fabricated via femtosecond laser for self-cleaning passive cooling10.1021/acs.nanolett.1c00038 ↗
25. Solar-driven thermal-wind synergistic effect on laser-textured superhydrophilic copper foam architectures for ultrahigh efficient vapor generation10.1063/5.0050623 ↗
26. Femtosecond laser induced robust periodic nanoripple structured mesh for highly efficient oil-water separation10.1039/C7NR04582D ↗
27. Fabrication of biomimetic anisotropic super-hydrophobic surface with rice leaf-like structures by femtosecond laser10.1016/j.optmat.2020.110740 ↗
28. The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systems10.1016/j.actamat.2009.01.017 ↗
29. The influence of axial loading on the interface stresses of thermal barrier coatings10.1016/j.commatsci.2009.09.012 ↗
30. Modeling the evolution of residual stresses in thermally sprayed YSZ coating on stainless steel substrate10.1007/s11666-019-00856-2 ↗
31. Finite element analysis of ultrasonically assisted turning of Inconel 71810.1016/j.jmatprotec.2004.04.299 ↗
32. A review of ultrashort pulsed laser ablation of materials10.2351/1.521827 ↗
33. Femtosecond laser “cold” micro-machining and its advanced applications
34. Laser surface texturing (LST) treatment before thermal spraying: a new process to improve the substrate-coating adherence10.1016/j.surfcoat.2010.07.044 ↗
35. Role of powder granulometry and substrate topography in adhesion strength of thermal spray coatings10.1007/s11666-016-0411-y ↗
36. Oxidation control with chromate pretreatment of MCrAlY unmelted particle and bond coat in thermal barrier systems10.1007/s11666-008-9169-1 ↗
37. Microstructural evolution and growth kinetics of thermally grown oxides in plasma sprayed thermal barrier coatings10.1016/j.pnsc.2016.01.004 ↗
38. Multifunctional coating interlayers for thermal-barrier systems10.1557/mrs.2012.238 ↗
39. A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications10.1016/j.actamat.2017.02.003 ↗
40. Effect of microstructure on early oxidation of MCrAlY coatings10.1016/j.actamat.2018.08.018 ↗
41. LaZrCeO/YSZ TBCs by EB-PVD: microstructural evolution, residual stress and degradation behavior10.1039/C9QM00077A ↗
42. Effects of Er stabilization on thermal property and failure behavior of Gd2Zr2O7 thermal barrier coatings10.1016/j.corsci.2021.109418 ↗
43. LaGdZrO/YSZ thermal barrier coatings by EB-PVD: microstructure, thermal properties and failure mechanism10.1016/j.ceja.2020.100073 ↗
44. Sm-doped Gd2Zr2O7 thermal barrier coatings: thermal expansion coefficient, structure and failure10.1016/j.vacuum.2021.110314 ↗
45. Criteria for analysis of abradable coatings10.1016/0257-8972(95)02443-3 ↗
46. Microstructure and thermal properties of a promising thermal barrier coating: YTaO410.1016/j.ceramint.2016.05.194 ↗
47. Measurements of residual stresses in thin films deposited on silicon wafers by indentation fracture10.1016/S1359-6454(99)00248-7 ↗
48. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
49. Fracture statistics of brittle materials: Weibull or normal distribution
50. Indentation toughness of ceramics: a statistical analysis10.1016/S0272-8842(02)00041-X ↗
51. Effect of thermal exposure on hardness and Young's modulus of EB-PVD yttria-partially-stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2005.01.018 ↗
52. Effect of loading rate and holding time on hardness and Young's modulus of EB-PVD thermal barrier coating10.1016/S0257-8972(03)00861-2 ↗
53. Zirconates as new materials for thermal barrier coatings10.1111/j.1151-2916.2000.tb01506.x ↗
54. Simulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling10.1016/S0921-5093(02)00458-6 ↗