Effect of high energy milling on microstructure and mechanical properties of Al2O3-10 wt% Co composites consolidated by spark plasma sintering (SPS)
Source abstract
Abstract
Abstract Al2O3-10 wt% Co composites were prepared by high energy milling in the presence of ethyl alcohol and with subsequent spark plasma sintering (SPS). The powders milled for 5 and 30 h were sintered by SPS at 1350 °C for 5 min. The effect of milling time on the sinterability and mechanical properties was studied. The morphology and structure of milled powders were investigated by scanning electron microscopy, dynamic light scattering and X-ray diffraction. The Co phase forms plate-like particles of different sizes, while finely fragmented Al2O3 particles are incorporated in the Co phase, forming composite particles. The average size of the composite particles decreases with increasing milling time, achieving 1.33 μm after 30 h. Crystallite size and micro-strain are inversely proportional. Overall, all the samples display homogeneous microstructures, high density (85.29–91.60%) and microhardness in the range 11.41–14.37 GPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. German · 2006
2. Aluminum oxide and alumina ceramics (review). Part 1. Properties of Al2O3 and commercial production of dispersed Al2O310.1007/s11148-019-00304-2 ↗
3. Ceramics for prosthetic hip and knee joint replacement10.1111/j.1551-2916.2007.01725.x ↗
4. Metallization of Al2O3 ceramic by magnetron sputtering Ti/Mo bilayer thin films for robust brazing to Kovar alloy10.1016/j.ceramint.2016.03.044 ↗
5. Martienssen · 2005
6. Recent processes for the production of alumina nano-particles10.1016/j.mset.2020.02.001 ↗
7. Low-temperature pressureless sintering of Al2O3-SiC-Ni nanocermets in air environment10.1016/j.ceramint.2018.07.023 ↗
8. Microstructure, mechanical properties and machining performance of spark plasma sintered Al2O3-ZrO2-TiCN nanocomposites10.1016/j.jeurceramsoc.2013.04.021 ↗
9. Rapid consolidation of nanostructured Mo-Al2O3 composite from mechanically synthesized powders10.1016/j.ceramint.2017.10.120 ↗
10. Microstructure and the fracture toughness of the Al2O3-Fe composites10.1016/S1044-5803(01)00113-9 ↗
11. Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying10.1016/j.ceramint.2016.11.194 ↗
12. Structural and magnetic properties of Co/Al2O3 cermet synthesized by mechanical ball milling10.1016/j.ceramint.2020.05.086 ↗
13. Preparation by mechanical alloying, characterization and sintering of Cu-20wt.% Al2O3 nanocomposites10.1016/j.matdes.2012.10.032 ↗
14. Synthesis and characterization of Zn/Al2O3 nanocomposite by mechanical alloying10.1016/j.msea.2007.08.059 ↗
15. Fabrication of Al2O3-ZrO2-Ni composites with improved toughness using nano powders prepared by mechanical alloying10.1016/j.ceramint.2020.05.002 ↗
16. Mechanochemical assisted synthesis of NiTi intermetallic based nanocomposite reinforced by Al2O310.1016/j.jallcom.2007.11.136 ↗
17. Synthesis and characterization of NiAl-Al2O3 nanocomposite powder by mechanical alloying10.1016/j.jallcom.2008.10.043 ↗
18. The structure and mechanical properties of Fe3Al-30 vol.% Al2O3 nanocomposite10.1016/j.jallcom.2009.09.005 ↗
19. Microstructure and magnetic properties of Co/Al2O3 nanocomposite powders10.1016/j.jallcom.2006.09.043 ↗
20. Efeito do teor metálico em catalisadores Co/Al2O3 aplicados à reação de reforma a vapor de ethanol10.1590/S0100-40422005000400006 ↗
21. Microstructures and mechanical properties of spark plasma sintered Al2O3-Co composites using electroless deposited Al2O3-Co powders10.2320/matertrans.MRA2008015 ↗
22. Mechanochemical synthesis of Al2O3/Co nanocomposite by aluminothermic reaction10.1016/j.apt.2011.04.008 ↗
23. Effect of the high energy milling on the microstructure of Cu-20%WC composite powders prepared with recycled WC
24. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
25. Recent developments in mechanical alloying
26. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
27. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
28. Trends in advanced SPS spark plasma sintering systems and technology10.4164/sptj.30.11_790 ↗
29. Electric pulse assisted rapid consolidation of ultrafine grained alumina matrix composites10.1016/S0921-5093(00)00772-3 ↗
30. Corrosion and mechanical behaviour of Al2o3.Tio2 composites produced by spark plasma sintering
31. Precipitation mechanism and microstructural evolution of Al2O3/ZrO2(CeO2) solid solution powders consolidated by spark plasma sintering10.1016/j.jmst.2019.09.028 ↗
32. Effect of reinforcement NbC phase on the mechanical properties of Al2O3-NbC nanocomposites obtained by spark plasma sintering10.1016/j.ijrmhm.2016.10.021 ↗
33. General profile and structure analysis software for powder diffraction data
34. Ruby structure peculiarities derived from X‐ray diffraction data: localization of chromium atoms and electron deformation density10.1002/pssa.2210870204 ↗
35. Owen · 1954 · 456
36. Properties of copper matrix reinforced with nano- and micro-sized Al2O3 particles10.1016/j.jallcom.2007.04.307 ↗
37. Production of Al-20 wt.% Al2O3 composite powder using high energy milling10.1016/j.powtec.2009.01.016 ↗
38. Mechanical alloying, sintering and characterization of Al2O3-20 wt%-Cu nanocomposite10.1016/j.ceramint.2013.05.099 ↗
39. Spark plasma sintering of Al2O3-Ni nanocomposites using Ni nanoparticles produced by rotary chemical vapour deposition10.1016/j.jeurceramsoc.2013.08.014 ↗