Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics
Source abstract
Abstract
Abstract In this work, SiBCN–TaC composite ceramics were prepared by a combination of mechanical alloying and reactive hot-pressing sintering techniques. The effects of TaC addition on microstructure, mechanical properties and oxidation resistance of the resulting composite ceramics were studied in detail. Results suggested that the as-sintered SiBCN–TaC composite ceramics composed of three phases: SiC, BN (C) and TaC. Some TaC~10–20 nm dispersed randomly within the ceramic matrix while others ~3–5 nm were scattered in turbostratic BN(C). The introduction of nanocrystalline TaC can effectively improve the flexural strength and fracture toughness of SiBCN ceramics. The incorporation of 10 wt% TaC showed the optimized mechanical properties with flexural strength and fracture toughness reaching to 399.5 MPa and 4.26 MPa m1/2 respectively. The TG-DTA analysis confirmed the oxidation damage of BN (C) phase can be effectively alleviated by the introduction of TaC nanocrystals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Crystallization and creep behavior of Si-B-C-N ceramics10.1016/j.actamat.2005.06.011 ↗
2. A silicoboron carbonitride ceramic stable to 2000 °C
3. Simple and low-cost synthetic route for SiBCN ceramic powder from a boron modified cyclotrisilazane10.1111/jace.15921 ↗
4. Carbon-content-dependent phase composition, microstructural evolution, and mechanical properties of SiBCN monoliths10.1111/jace.15342 ↗
5. Amorphous silicoboron carbonitride ceramic with very high viscosity at temperatures above 1500oC10.1111/j.1151-2916.1998.tb02780.x ↗
6. Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: fabrication, microstructures, properties and their relevant basic scientific issues10.1016/j.pmatsci.2018.05.006 ↗
7. Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites10.1007/s40145-012-0017-x ↗
8. Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths10.1016/j.jeurceramsoc.2018.04.061 ↗
9. Enhanced mechanical properties, thermal shock resistance and oxidation resistance of Si2BC3N ceramics with Zr-Al addition, Mat10.1016/j.msea.2018.04.035 ↗
10. Effects of in situ amorphous graphite coating on ablation resistance of SiC fiber reinforced SiBCN ceramics in an oxyacetylene flame10.1016/j.corsci.2016.10.002 ↗
11. Enhanced mechanical properties and thermal shock resistance of Si2BC3N ceramics with SiC coated MWCNTs10.1007/s40145-018-0300-6 ↗
12. Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition10.1016/j.jeurceramsoc.2018.12.005 ↗
13. Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid10.1111/jace.16064 ↗
14. Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance10.1016/j.jallcom.2016.06.250 ↗
15. Fabrication and microstructures of functional gradient SiBCN-Nb composite by hot pressing10.1016/j.matchar.2016.02.014 ↗
16. Densification, microstructural evolution and mechanical properties of Si-B-C-N monoliths with LaB6 addition, J. Alloy10.1016/j.jallcom.2016.12.084 ↗
17. Microstructural evolution, mechanical and thermal properties of LaB6 embedded in Si-B-C-N prepared by spark plasma sintering10.1016/j.ceramint.2016.12.016 ↗
18. Si-B-C-N monoliths with LaB6-induced well-developed BN(C) flakes10.1016/j.matlet.2016.10.020 ↗
19. Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering10.1016/j.ceramint.2017.03.068 ↗
20. Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites10.1016/j.ceramint.2016.12.083 ↗
21. A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering10.1039/C6DT01894G ↗
22. Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid10.1111/jace.16064 ↗
23. Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance10.1016/j.jallcom.2016.06.250 ↗
24. High-pressure strength of nanocrystalline tantalum carbide (TaC) studied at a non-hydrostatic compression10.1016/j.ijrmhm.2013.04.009 ↗
25. Research progress on preparation methods of TaC ceramic materials
26. Preparation and properties of C/TaC composites via PIP process10.1016/j.ceramint.2016.11.025 ↗
27. Formation, characterization, and properties of radiopaque TaC-C/C and ZrO2-C/C composites10.1166/mex.2015.1267 ↗
28. Mechanical properties and oxidation behaviors of carbon/carbon composites with C–TaC–C multi-interlayer10.1007/s10853-010-4376-9 ↗
29. Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers10.1016/j.apsusc.2009.07.006 ↗
30. Crystallization of SiC and its effects on microstructure, hardness and toughness in TaC/SiC multilayer films10.1016/j.ceramint.2017.09.220 ↗
31. Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers10.1016/j.apsusc.2009.07.006 ↗
32. Polymer precursor synthesis of TaC-SiC ultrahigh temperature ceramic nanocomposites10.1039/C6RA17723A ↗
33. Tribochemistry dependent tribological behavior of superhard TaC/SiC multilayer films10.1016/j.surfcoat.2018.01.064 ↗
34. Preparation of Si3N4 -TaC and Si3N4 -ZrC composite ceramics and their mechanical properties10.1016/j.ijrmhm.2016.09.017 ↗
35. Strengthening and toughening effects of MWCNTs on Si2BC3N ceramics sintered by SPS technique10.1016/j.msea.2017.10.089 ↗
36. Enhanced mechanical properties, thermal shock resistance and oxidation resistance of Si2BC3N ceramics with Zr-Al addition, Mat10.1016/j.msea.2018.04.035 ↗
37. Mechanical properties and thermal shock resistance of Si2BC3N ceramics with ternary Al4SiC4 additive10.1016/j.ceramint.2018.02.103 ↗
38. Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying10.1039/C6RA08367F ↗
39. Progress in research on ceramic toughened by particles
40. High-temperature oxidation behavior of dense SiBCN monoliths: carbon-content dependent oxidation structure, kinetics and mechanisms10.1016/j.corsci.2017.05.013 ↗
41. Effects of boron addition on the high temperature oxidation resistance of dense SiBCN monoliths at 1500 oC10.1016/j.corsci.2017.05.014 ↗
42. Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame10.1016/j.corsci.2015.07.006 ↗