Experimental planning of the synthesis of strontium molybdate by EDTA-citrate and its structural influence, morphology and optical bandgap
Source abstract
Abstract
It was initially used a 23 experimental design with central point in triplicate to synthesize strontium molybdate by EDTA-citrate combined complexation method, where the influence of pH (6, 7.5 e 9), calcining time (3, 4 e 5 h) and heating rate (5, 7 e 10 °C min−1) was investigated. Single-phase powders were obtained when calcined at 650 °C with tetragonal crystalline structure. The heating rate is the most influent independent variable on the intensities of the X-ray diffractions peaks. The synthesized powders are shown as agglomerates with irregular spherical and bipyramidal morphology. According to the experimental design, the conditions of calcining time of 3 h and heating rate of 10 °C min−1 show the lowest values of energy band gap (4.18 and 4.17 eV) for pH 6 and 9, respectively. The statistical models generated were able to describe the phenomena observed
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Crystal Structures and Properties · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Preparation of cobalt molybdate nanoparticles; Taguchi optimization and photocatalytic oxidation of Reactive Black 8 dye10.1016/j.powtec.2013.08.022 ↗
2. Electrochemical hydrogen evolution catalyzed by SrMoO4 spindle particles in acid water10.1016/j.ijhydene.2013.07.064 ↗
3. Synthesis and characterization of carbon nanotubes/titanium molybdate nanocomposite and assessment of its photocatalytic activity10.1016/j.molstruc.2013.10.020 ↗
4. Optical and dielectric properties of SrMoO4 powders prepared by the combustion synthesis method10.12989/amr.2012.1.3.191 ↗
5. Single step synthesis of SrMoO4 particles from SrSO4 and their anti-corrosive activity10.1016/j.jallcom.2014.03.151 ↗
6. Eu3+-activated SrMoO4 phosphors for white LEDs applications: synthesis and structural characterization10.1016/j.optmat.2015.01.006 ↗
7. Optimization of strontium molybdate based composite anode for solid oxide fuel cells10.1016/j.jpowsour.2014.10.062 ↗
8. Solvothermal preparation, electronic structure and photocatalytic properties of PbMoO4 and SrMoO410.1016/j.apcatb.2009.05.016 ↗
9. Luminescence and absorbance of highly crystalline CaMoO4, SrMoO4, CaWO4 and SrWO4 nanoparticles synthesized by co-precipitation method at room temperature10.1016/j.jallcom.2010.07.033 ↗
10. Growth and characterization of large SrMoO4 crystals10.1016/j.jcrysgro.2010.10.207 ↗
11. Investigation of the permeation behavior and stability of a Ba0:5Sr0:5Co0:8Fe0:2O3−δ oxygen membrane10.1016/S0376-7388(00)00337-9 ↗
12. Novel and ideal zirconium-based dense membrane reactors for partial oxidation of methane to syngas10.1023/A:1014950027492 ↗
13. Effects of preparation method on oxygen permeation properties of SrFeCo0.5Ox membrane10.1016/S1383-5866(03)00048-0 ↗
14. High temperature conduction and methane conversion capability of BaCeO3 perovskite10.1016/j.powtec.2011.12.039 ↗
15. LaNi0,3Co0,8Fe0,2O3−δ ceramic materials: structural and catalytic reactivity under CO stream10.3390/catal4020077 ↗
16. Strontium and cerium tungstate materials SrWO4 and Ce2(WO4)3: methane oxidation and mixed conduction10.1016/j.cattod.2012.09.036 ↗
17. Effect of synthesis parameters on the size of cobalt ferrite crystallite10.1016/j.ceramint.2016.10.105 ↗
18. Aqueous sol–gel synthesis and thermoanalytical study of the alkaline earth molybdate precursors10.1007/s10973-013-3579-0 ↗
19. Effect of process parameters on combined EDTA-Citrate synthesis of Ba0,5Sr0,5Co0,8Fe0,2O3−δ10.1016/j.powtec.2011.02.015 ↗
20. SrMoO4 powders processed in microwave-hydrothermal: synthesis, characterization and optical properties10.1016/j.cej.2008.01.015 ↗
21. Eu3+/Tb3+-codoped Y2O3 nanophosphors: Rietveld refinement, bandgap and photoluminescence optimization10.1088/0022-3727/45/41/415102 ↗
22. Young · 1993
23. Edelstein · 1996
24. Dedavid · 2007
25. Weak absorption tails in amorphous semiconductors10.1103/PhysRevB.5.3144 ↗
26. Preparation, structural and optical characterization of BaWO4 and PbWO4 thin films prepared by a chemical route10.1016/S0955-2219(03)00099-2 ↗
27. Optical absorption of divalent metal tungstates: correlation between the band-gap energy and the cation ionic radius10.1209/0295-5075/83/37002 ↗
28. Shape controlled synthesis of CaMoO4 thin films and their photoluminescence property10.1016/j.jssc.2008.01.051 ↗
29. Effect of different strontium precursors on the growth process and optical properties of SrWO4 microcrystals10.1007/s10853-015-9377-2 ↗
30. Electronic structure, growth mechanism and photoluminescence of CaWO4 crystals10.1039/C1CE05977G ↗
31. Synthesis, growth process and photoluminescence properties of SrWO4 powders10.1016/j.jcis.2008.10.034 ↗
32. A two-dimensional four-fold symmetric SrMoO4 dendrite10.1039/C4CE02132K ↗
33. Chemical control on the size and properties of nano NiFe2O4 synthesized by sol–gel autocombustion method10.1016/j.ceramint.2013.09.103 ↗
34. The effect of pH values on the phase formation and properties of BaFe12O19 prepared by citrate–EDTA complexing method10.1016/j.jallcom.2006.12.118 ↗
35. Selective synthesis and luminescence properties of self-assembled SrMoO4 superstructures via a facile sonochemical route10.1021/jp907525p ↗
36. Sonochemical synthesis of gold nanoparticles: effects of ultrasound frequency10.1021/jp0549374 ↗
37. Rietveld refinement and optical properties of SrWO4: Eu3+ powders prepared by the non-hydrolytic sol-gel method10.1016/S1002-0721(14)60391-4 ↗
38. Controllable synthesis of hierarchical strontium molybdate by sonochemical method10.1002/crat.201200058 ↗
39. Structural, vibrational and photoluminescence properties of Sr(1-x)PbxMoO4 solid solution synthesized by solid state reaction10.1016/j.materresbull.2016.03.015 ↗