Ablation behavior of laminated Graphite/ZrB2-SiC ceramics in two different directions
Source abstract
Abstract
Abstract Laminated Graphite/ZrB2-SiC ceramics were fabricated by tape casting and hot pressing. The ablation properties of the ceramics in the parallel and the perpendicular directions were studied using an oxyacetylene torch. The mass ablation rates were 8.1 ± 0.4 mg/s in the parallel direction and 0.2 ± 0.1 mg/s in the perpendicular direction. The linear ablation rates were 3.1 ± 0.2 µm/s in the parallel direction and 1.2 ± 0.1 µm/s in the perpendicular direction. Thus, the ablation resistance of the laminated Graphite/ZrB2-SiC ceramics in the perpendicular direction was higher than that in the parallel direction. This anisotropy was mainly attributed to the lower surface temperature in the perpendicular direction resulted from higher thermal conductivity, as well as the orientation of the weak graphite interface layer perpendicular to the ablation surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Electrostatic assembly preparation of high-toughness zirconium diboride-based ceramic composites with enhanced thermal shock resistance performance10.1021/acsami.6b00822 ↗
2. Material property requirements for analysis and design of UHTC components in hypersonic applications10.1016/j.jeurceramsoc.2010.01.026 ↗
3. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites10.1016/j.jeurceramsoc.2017.08.013 ↗
4. Efficient technologies for the fabrication of dense TaB2-based ultra-high-temperature ceramics10.1021/am100211h ↗
5. Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2−20SiC based ultra-high temperature ceramic composites10.1016/j.carbon.2016.10.002 ↗
6. Reactive hot pressing of ZrC-SiC ceramics at low temperature10.1111/jace.12090 ↗
7. Oxidation behaviour of HfB2−15vol% TaSi2 at low intermediate and high temperatures10.1016/j.scriptamat.2010.05.050 ↗
8. Effect of high temperature oxidation on the radiative properties of HfC-based ceramics10.1016/j.corsci.2017.07.007 ↗
9. Oxidation behavior of ZrB2-SiC-TaC ceramics10.1111/j.1551-2916.2011.04945.x ↗
10. Properties of ZrB2-SiC ceramics by pressureless sintering10.1111/j.1551-2916.2009.03039.x ↗
11. Effects of graphite flake diameter on mechanical properties and thermal shock behavior of ZrB2-nanoSiC-graphite ceramics10.1016/j.ijrmhm.2013.02.015 ↗
12. Microstructure and toughening mechanisms in spark plasma-sintered ZrB2 ceramics reinforced by SiC whiskers or SiC-chopped fibers10.1111/j.1551-2916.2010.03730.x ↗
13. Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC-ZrB2-ZrC10.1016/j.corsci.2013.11.019 ↗
14. Oxidation behavior and phase transition of ZrB2-SiCw-ZrO2f ceramic10.1016/j.corsci.2013.08.002 ↗
15. Laminated ZrB2-SiC/graphite ceramics with simultaneously improved flexural strength and fracture toughness10.1016/j.ceramint.2013.08.070 ↗
16. The indentation thermal shock behavior of laminated ZrB2-SiC ceramics with strong interfaces10.1016/j.ceramint.2016.08.056 ↗
17. Laminated HfC-SiC ceramics produced by aqueous tape casting and hot pressing10.1016/j.ceramint.2015.07.075 ↗
18. Microstructures and mechanical properties of laminated ZrC-SiC composites with different SiC powders10.1016/j.ceramint.2015.07.204 ↗
19. Effect of graphite flake orientation on microstructure and mechanical properties of ZrB2-SiC-graphite composite10.1016/j.jallcom.2009.05.126 ↗
20. Fabrication and mechanical properties of laminated HfC-SiC/BN ceramics10.1016/j.jeurceramsoc.2014.04.021 ↗
21. R-curve behavior of laminated ZrB2-SiC/Graphite ceramics in two different directions10.1016/j.ceramint.2017.02.077 ↗
22. ZrB2-SiC laminated ceramic composite10.1016/j.jeurceramsoc.2011.04.020 ↗
23. Strong ZrB2-SiC-WC ceramics at 1600 °C10.1111/j.1551-2916.2011.05062.x ↗
24. Thermal diffusivity of graphite sheet at low temperatures10.1068/htwu128 ↗
25. Large diameter pitch-based graphite fiber reinforced unidirectional carbon/carbon composites with high thermal conductivity densified by chemical vapor infiltration10.1016/j.carbon.2016.11.080 ↗
26. Oxidation-resistant ZrB2-SiC composites at 2200 °C10.1016/j.compscitech.2007.08.017 ↗
27. Effect of surface oxidation on thermal shock resistance of ZrB2-SiC-ZrC ceramic at temperature difference from 800 to 1900 °C10.1016/j.corsci.2015.05.035 ↗
28. Effect of interlayer on the ablation properties of laminated HfC-SiC ceramics under oxyacetylene torch10.1016/j.corsci.2015.01.021 ↗