Inverse Hall–Petch effect in nanostructured ZnS
Source abstract
Abstract
Vickers microhardness of compacted nanoparticles of ZnS of average grain sizes 3–12 nm was studied for different compaction pressures. The hardness was found to increase rapidly with load for smaller values of the load and then to become practically independent of load. The microhardness was found to increase with increase in grain size showing inverse Hall–Petch relation in the present study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic properties of thin films · Metal and Thin Film Mechanics · Surface and Thin Film Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Balta calleja FJ, Sandiov DS et al (2002) Review: the microhardness of non-crystalline materials. J Mater Sci 37:4507–451610.1023/A:1020648908142 ↗
2. Bernhardt EO (1941) The microhardness indentation load/size effect in rutile and cassiterite single crystals. Z Metallk 33:135–138
3. Chokshi AK, Rosen A et al (1989) On the validity of Hall–Petch relationship in nanocrystalline materials. Scr Mater 23(10):1679–1684
4. Christman T, Jain M (1991) Processing and consolidation of bulk nanocrystalline titanium aluminide. Scr Mater 25:767–772. doi: 10.1016/0956-716X(91)90222-M10.1016/0956-716X(91)90222-M ↗
5. Conrad H, Narayanan J (2000) On the grain softening in nanocrystalline materials. Scr Mater 42:1025–1030. doi: 10.1016/S1359-6462(00)00320-110.1016/S1359-6462(00)00320-1 ↗
6. Fougere GE, Weertman JR et al (1992) Grain size dependent hardness and softening of nano-crystalline Cu and Pd. Scr Metall Mater 26(12):1879–1883. doi: 10.1016/0956-716X(92)90052-G10.1016/0956-716X(92)90052-G ↗
7. Gong JH, Li JK (1996) Analysis of size effects in hardness testing. J Inorg Mater 11:375
8. Gong JH, Li Y (2000) An energy-balance analysis for the size effect in low-load hardness testing. J Mater Sci 35:209–213. doi: 10.1023/A:100477760755310.1023/A:1004777607553 ↗
9. Gong JH, Yuan QMJ (1996) Tianjin Univ 29:727 (A group of articles)
10. Gong JH, Wu JJ et al (1998a) On the description of indentation size effects. J Mater Sci Lett 17:473–476. doi: 10.1023/A:100657632673110.1023/A:1006576326731 ↗
11. Gong JH, Wu JJ et al (1998b) Load dependence of the apparent hardness of silicon nitride in a wide range of loads. Mater Lett 35:58. doi: 10.1016/S0167-577X(97)00234-610.1016/S0167-577X(97)00234-6 ↗
12. Grodzinski (1953) Tnermische Turbemaschineu. Rev Gen Mec 35:147
13. Hofler HJ, Averback RS (1990) Grain growth in nanocrystalline TiO2 and its relation to Vickers hardness and fracture toughness. Scr Metall Mater 24(12):2401–240610.1016/0956-716X(90)90101-L ↗
14. Koubaiti C, Levade Vanderschaeve G (2000) Vickers indentation on the {001} faces of GaAs under infrared illumination and in darkness. Philos Mag A 80(21):83–10410.1080/01418610008212042 ↗
15. Liu XD, Wang JT et al (1993) Preparation and properties of nanocrystalline (Fe0.99Mo0.01)78Si9B13 alloys. Scr Metall Mater B2 28:59–6410.1016/0956-716X(93)90537-3 ↗
16. Lu K, Sui ML (1993) An explanation to the abnormal Hall–Petch relation in nano crystalline materials. Scr Metall Mater 28:1465–1470. doi: 10.1016/0956-716X(93)90576-E10.1016/0956-716X(93)90576-E ↗
17. Lu K, Wei WD et al (1990) Microhardness and fracture properties of nanocrystalline Ni-P alloy. Scr Metall Mater 24(12):2319–232310.1016/0956-716X(90)90086-V ↗
18. Mason W, Johnson PF et al (1991) Importance of load cell sensitivity in determination of the load dependence of hardness in recording microhardness test. J Mater Sci 26:6576–6579. doi: 10.1007/BF0240264810.1007/BF02402648 ↗
19. Mayer E (1908) Influence of low indentation load on hardness. Phys Z 9:66–68
20. Michels BD, Frischat GH (1982) Microhardness of chalcogenide glasses of the system Se–Ge–As. J Mater Sci 17:329–334. doi: 10.1007/BF0059146610.1007/BF00591466 ↗
21. Nieh TG, Wadsworth J et al (1991) Hall–Petch relation in nanocrystalline solids. Scr Metall Mater 25(4):955–958. doi: 10.1016/0956-716X(91)90256-Z10.1016/0956-716X(91)90256-Z ↗
22. Nieman GW, Weertman JR et al (1991) Mechanical behaviour of nanocrystalline Cu and Pd. J Mater Res 6(5):1012. doi: 10.1557/JMR.1991.101210.1557/JMR.1991.1012 ↗
23. Nieman GW, Weertman JR et al (1992) Hall–Petch effects in nanocrystalline Cu and Pd. Mater Res 6:55–58
24. Onitsch PEM (1950) Some results of microhardness testing by indentation depth. Mikroskopie 95:12
25. Qin XY, Wu XJ et al (1995) The microhardness of nanocrystalline silver. Nanostruct Mater 5(1):101–110. doi: 10.1016/0965-9773(95)00003-W10.1016/0965-9773(95)00003-W ↗
26. Sebastian S, Khadar MA (2005) Microhardness indentation size effect studies in 60 B2O3-(40 − x)PbO-xMCl2 and 50 B2O3-(50−x) PbO-xMcl2(M=Pb,Cd) of glasses. J Mater Sci 40:1655–1659. doi: 10.1007/s10853-005-0666-z10.1007/s10853-005-0666-z ↗
27. Siegel RW (1994) Properties of nanocrystalline solids. J Phys Chem Solids 55(16):1097–1106. doi: 10.1016/0022-3697(94)90127-910.1016/0022-3697(94)90127-9 ↗
28. Suryanarayana C (1994) Structure and properties of nanocrystalline materials. Bull Mater Sci 17(4):307–346. doi: 10.1007/BF0274522010.1007/BF02745220 ↗
29. Vijoy PS, Khadar MA et al (1999) Microhardness study of (1−x−y)(B2O3)-x(Li2O)-y(MCl2),(M=Cd,Zn) glasses. Bull Mater Sci 22(7):1061–1065. doi: 10.1007/BF0274562110.1007/BF02745621 ↗