Extremely rapid synthesis of disordered LiNi0.5Mn1.5O4 with excellent electrochemical performance
Source abstract
Abstract
Abstract Single phase LiNi 0.5 Mn 1.5 O 4 spinel with excellent electrochemical performance has been synthesized by a novel solution combustion synthesis method at 700 °C for 30 min. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) have been used to investigate the phase structure and micro-morphology of the product. Charge–discharge measurement, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) have been used to study the electrochemical performance. The results indicate that the as-prepared product is a single phase LiNi 0.5 Mn 1.5 O 4 spinel with a disordered Fd−3m space group. The LiNi 0.5 Mn 1.5 O 4 exhibits excellent electrochemical performance including cycling stability and rate capability due to its high cystallinity, large Li + diffusion coefficient and low charge transfer resistance. It can deliver reversible capacities of 130, 113 and 104 mAh/g at 1 C, 10 C and 20 C current rates, respectively. The capacity retentions of the product at 1 C at room temperature, at 10 C at room temperature and at 1 C at 55 °C after 100 cycles are 97.5%, 99.7% and 94.2%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Electrodes with high power and high capacity for rechargeable lithium batteries10.1126/science.1122152 ↗
2. Research on advanced materials for Li-ion batteries10.1002/adma.200901710 ↗
3. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
4. High rate micron-sized niobium-doped LiMn1.5Ni0.5O4 as ultra high power positive-electrode material for lithium-ion batteries10.1016/j.jpowsour.2012.03.095 ↗
5. High-performance LiNi0.5Mn1.5O4 spinel controlled by Mn3+ concentration and site disorder10.1002/adma.201104767 ↗
6. Low temperature synthesis of LiNi0.5Mn1.5O4 spinel10.1016/j.matlet.2005.11.013 ↗
7. Influence of synthesis conditions on electrochemical properties of high-voltage Li1.02Ni0.5Mn1.5O4 spinel cathode material10.1016/j.jpowsour.2009.04.012 ↗
8. Electrochemical properties of nano-crystalline LiNi0.5Mn1.5O4 synthesized by polymer-pyrolysis method10.1007/s10008-007-0409-y ↗
9. Glycerol-assisted solution combustion synthesis of improved LiMn2O410.2478/s13536-013-0115-7 ↗
10. Low-temperature solution combustion synthesis of high performance LiNi0.5Mn1.5O410.1016/j.ceramint.2013.11.095 ↗
11. Surface-segregated, high-voltage spinel LiMn1.5Ni0.42Ga0.08O4 cathodes with superior high-temperature cyclability for lithium-ion batteries10.1016/j.elecom.2011.08.041 ↗
12. A low-temperature reaction route to high rate and high capacity LiNi0.5Mn1.5O410.1016/j.jpowsour.2007.02.015 ↗
13. Improving rate capability of high potential LiNi0.5Mn1.5O4−x cathode materials via increasing oxygen non-stoichiometries10.1016/j.electacta.2012.02.022 ↗
14. A comparative study of Fd−3m and P4332 LiNi0.5Mn1.5O410.1016/j.ssi.2011.04.007 ↗
15. Influence of cation ordering and lattice distortion on the charge–discharge behavior of LiMn1.5Ni0.5O4 Spinel between 5.0 and 2.0V10.1021/cm3020836 ↗
16. High voltage spinel oxides for Li-ion batteries: from the material research to the application10.1016/j.jpowsour.2008.08.043 ↗
17. Importance of ignition temperature in solution combustion synthesis of LiNi0.5Mn1.5O410.1149/2.049405jes ↗
18. Nanosized high voltage cathode material LiMg0.05Ni0.45Mn1.5O4: structural, electrochemical and in situ investigation10.1016/j.jpowsour.2008.09.121 ↗
19. Synthesis and electrochemical properties of high-voltage LiNi0.5Mn1.5O4 electrode material for Li-ion batteries by the polymer-pyrolysis method10.1007/s10008-005-0695-1 ↗
20. Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries10.1016/j.electacta.2010.12.109 ↗
21. Kinetic analysis of the Li+ ion intercalation behavior of solution derived nano-crystalline lithium manganate thin films10.1016/j.jpowsour.2004.06.056 ↗
22. Theory and application of cyclic voltammetry for measurement of electrode reaction kinetics10.1021/ac60230a016 ↗
23. Studies on a Li–Mn–O spinel system (obtained by melt-impregnation) as a cathode for 4V lithium batteries Part 1. Synthesis and electrochemical behaviour of LixMn2O410.1016/0378-7753(95)80009-6 ↗
24. Facile polymer-assisted synthesis of LiNi0.5Mn1.5O4 with a hierarchical micro–nano structure and high rate capability10.1039/c2ra20669b ↗
25. Understanding the improved electrochemical performances of Fe-substituted 5V spinel cathode LiMn1.5Ni0.5O410.1021/jp904276t ↗
26. Impedance studies of the thin film LiMn2O4/electrolyte interface10.1149/1.1427075 ↗
27. Facile synthesis of porous LiMn2O4 spheres as cathode materials for high-power lithium ion batteries10.1016/j.jpowsour.2012.10.077 ↗