Microwave-assisted polyol synthesis of sub-micrometer Y2O3 and Yb-Y2O3 particles for laser source application

Sub-micrometer powder (100-150 nm diameter) of Yb-doped yttrium oxide was obtained, for the first time, by microwave-assisted polyol (diethylene glycol, DEG) method. This method is based on fast and homogeneous increase of temperature, due to the microwave heating, and on addition of the hydrolysing agent (water) at high temperature. This promotes a fast nucleation followed by a controlled growth of nuclei. Different procedures were used to process the as-synthesized powders. In some cases washing by ultrapure water was used to dissolve nitrate and DEG by-products, this treatment allowed the use of a lower calcination temperature (150-200 °C less) to obtain the crystalline phase. Analysis of the calcined powder showed different levels of structures: from nanocrystal (10-15 nm), to primary particles (100-150 nm), to micrometer soft aggregates (2-4 ?m). The microwave-assisted polyol method resulted an easy way to dope yttria with the desired amount of Yb3+. This work was carried out in order to prepare particles to be used as rare-earth doped Y2O3 and YAG polycrystalline transparent ceramic for laser source applications.