Effect of heterojunction on photocatalytic properties of multilayered ZnO-based thin films

In the present study, the effects of the heterojunctions on the optical and structural characteristics and the resulting photocatalytic properties of multilayered ZnO-based thin films were investigated. The junctions were composed of semiconducting ZnO nano-porous films coated on the In2O3 and SnO2 counterpart layers. The multilayered ZnO films based on the triple-layered Ag-doped indium oxide (AIO)/tin oxide (TO)/zinc oxide (ZnO), indium oxide (IO)/Ag-doped tin oxide (ATO)/zinc oxide (ZnO), indium oxide (IO)/tin oxide (TO)/zinc oxide (ZnO) and tin oxide (TO)/ indium oxide (IO)/zinc oxide (ZnO) have been fabricated by subsequent sol‐gel dip coating. Their structural and optical properties combined with photocatalytic characteristics were examined toward degradation of Solantine Brown BRL (C.I. Direct Brown), an azo dye using in Iran textile industries as organic model under UV light irradiation. Effects of operational parameters such as initial concentration of azo dye, irradiation time, solution pH, absence and presence of Ag doping and consequent of sublayers on the photodegradation efficiencies of ZnO nultilayered thin films were also investigated and optimum conditions were established. It was found that the photocatalytic degradation of azo dye on the composite films followed pseudo-first order kinetics. Photocatalytic activity of AIO/TO/ZnO interface composite film was higher compared with other films and the following order was observed for films activities: AIO/TO/ZnO > IO/TO/ZnO > ATO/IO/ZnO > TO/IO/ZnO. Differences in the film efficiencies can be attributed to differences in crystallinity, interfacial lattice mismatch, and surface morphology. Besides, the presence of Ag doping between layers that may act as trap for electrons generated in the ZnO over layer thus preventing electron‐hole recombination. # 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.