Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings
Source abstract
Abstract
Abstract Pore structure is one of the major factors influencing the failure mechanisms of thermal barrier coatings (TBCs) during high-temperature service. Powders exhibiting different pore structures have been produced using the plasma spheroidization technique. To improve the strain tolerance of an aircraft engine's hot sections, the preparation method of the TBCs material—8-wt% yttria-stabilized zirconia powders—has been continuously optimized. In this paper, the constrained effects of pores on the ceramic top coating of plasma-sprayed lamellar TBCs were investigated. Furthermore, the crystal phase structures, thermophysical properties, porosity, microstructures, and synthesis mechanism of powders and coatings were analyzed. Results revealed that the top ceramic coating, which was made from powders cooled by air and distilled water, can influence the coating porosity. Moreover, thermal insulation was substantiated by the finite element analysis method. Consequently, dense powders cooled by water can be used on the top surface in direct contact with high temperature flame flow to resist the diffusion of oxides, and the porous powder cooled by air can be applied in the middle coating to decrease the thermal conductivity. Hence, TBCs with various layers of different porosities can prolong the service life of thermal barrier coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Flame retardant materials and properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Calcium-magnesium-alumino-silicate induced degradation and failure of La2(Zr0.7Ce0.3)2O7/YSZ double-ceramic–layer thermal barrier coatings prepared by electron beam-physical vapor deposition10.1016/j.jeurceramsoc.2017.10.057 ↗
2. A novel long-life cerium lanthanum zirconate thermal barrier coating controlled by designed portholes10.1016/j.surfcoat.2018.05.059 ↗
3. Preparation of nanostructured Gd2Zr2O7-LaPO4 thermal barrier coatings and their calcium-magnesium-alumina-silicate (CMAS) resistance10.1016/j.jeurceramsoc.2017.03.069 ↗
4. Synthesis and characterization of nanostructured t′-YSZ spherical feedstocks for atmospheric plasma spraying10.1016/j.jallcom.2018.01.033 ↗
5. Thermal conductivities and phase stability of Gd3TaO7 and La doped Gd3TaO7 ceramics10.1016/j.jallcom.2017.10.266 ↗
6. The evolution of residual stress in the thermally grown oxide on Pt diffusion bond coats in TBCs10.1016/S1359-6454(02)00436-6 ↗
7. TGO growth behaviour in TBCs with APS and HVOF bond coats10.1016/j.surfcoat.2007.09.042 ↗
8. Giant permittivity and low dielectric loss of Fe doped BaTiO3 ceramics: Experimental and first-principles calculations10.1016/j.jeurceramsoc.2017.10.014 ↗
9. Microstructure, friction and wear of NbC coatings on a Fe substrate fabricated via an in situ reaction10.1016/j.surfcoat.2017.05.046 ↗
10. Nanostructured Dy2O3 films: an XPS investigation10.1116/11.20080702 ↗
11. Gd2O3 nanostructured thin films analyzed by XPS10.1116/11.20080703 ↗
12. Effects of process parameters of vacuum pre-oxidation on the microstructural evolution of CoCrAlY coating deposited by HVOF10.1016/j.jallcom.2017.11.165 ↗
13. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
14. Finite element simulation of residual stress and failure mechanism in plasma sprayed thermal barrier coatings using actual microstructure as the representative volume10.1016/j.surfcoat.2016.02.028 ↗
15. Finite element simulation of thermal barrier coating performance under thermal cycling10.1016/j.surfcoat.2010.08.099 ↗
16. Mechanical and thermal properties of fine-grained quasi-eutectoid (La1-xYbx)2Zr2O7 ceramics10.1016/j.jeurceramsoc.2015.04.024 ↗
17. Fast synthesis of novel micron porous particles of Gd, Yb and Y-stabilized zirconia to prepare TBCs with low thermal conductivity10.1016/j.matchemphys.2020.124018 ↗
18. Effect of TGO thickness, pores, and creep on the developed residual stresses in thermal barrier oatings under cyclic loading using SEM image-based finite element model10.1016/j.ceramint.2021.03.336 ↗
19. Numerical analysis of the influence of pore microstructure on thermal conductivity and Young's modulus of thermal barrier coating10.1016/j.ceramint.2020.06.214 ↗
20. Thermal resistance due to point defects at high temperatures10.1103/PhysRev.119.507 ↗
21. Effect of lattice defects on thermal conductivity of Ti-doped, Y2O3-stabilized ZrO210.1016/j.actamat.2013.05.038 ↗
22. Thermal conductivity of the gadolinium calcium silicate apatites: effect of different point defect types10.1016/j.actamat.2011.03.008 ↗
23. Lattice thermal conductivity of disordered semiconductor alloys at high temperatures10.1103/PhysRev.131.1906 ↗
24. Ultrahigh thermal isolation across heterogeneously layered two-dimensional materials10.1126/sciadv.aax1325 ↗
25. The study on porosity and thermophysical properties of nanostructured La2Zr2O7 coatings10.1016/j.apsusc.2011.05.069 ↗
26. Thermal expansion and fracture toughness of (RE0.9Sc0.1)2Zr2O7 (RE=La, Sm, Dy, Er) ceramics10.1016/j.ceramint.2015.08.151 ↗
27. Toughening of nontransformable t'-YSZ by addition of Titania10.1111/j.1551-2916.2007.01990.x ↗
28. Process maps for plasma spraying of yttria-stabilized zirconia: an integrated approach to design, optimization and reliability10.1016/j.msea.2008.07.058 ↗
29. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: a review10.1007/s11666-007-9148-y ↗
30. Low thermal conductivity Sr2+, Zn2+ and Ti4+ ions co-doped LaMgAl11O19 for potential thermal barrier coating applications10.1016/j.ceramint.2014.07.064 ↗
31. Influence of B site substituent Ti on the structure and thermophysical properties of A2B2O7-type pyrochlore Gd2Zr2O710.1016/j.actamat.2009.06.040 ↗
32. Low thermal conductivity without oxygen vacancies in equimolar YO1.5+TaO2.5- and YbO1.5+TaO2.5-stabilized tetragonal zirconia ceramics10.1016/j.actamat.2010.04.040 ↗
33. Lower limit to the thermal conductivity of disordered crystals10.1103/PhysRevB.46.6131 ↗
34. A parametric study of the Double-Ceramic-Layer Thermal Barrier Coating Part II: optimization selection of mechanical parameters of the inside ceramic layer based on the effect on the stress distribution10.1016/j.surfcoat.2013.10.053 ↗
35. A parametric study of the double-ceramic-layer thermal barrier coatings part I: optimization design of the ceramic layer thickness ratio based on the finite element analysis of thermal insulation (take LZ7C3/8YSZ/NiCoAlY DCL-TBC for an example)10.1016/j.surfcoat.2013.10.049 ↗