Tribological behavior of graphene reinforced chemically bonded ceramic coatings
Source abstract
Abstract
Abstract To investigate tribological behavior of graphene reinforced chemically bonded ceramic coatings at different temperatures, tribological tests at room temperature, 200 °C and 500 °C were carried out. Results show that the fracture toughness and the hardness of the coating are improved with the introduction of graphene. Besides, the friction coefficient of the coating decreases with the addition of graphene at the room temperature and 200 °C. The coating without graphene achieves the similar friction coefficient at all temperatures. However, the coating with graphene achieves the lowest friction coefficient at 200 °C, and achieves the highest at 500 °C. In addition, the wear rate of the coating decreases with the increase of graphene. Besides, the wear rate at 200 °C is almost similar with that at room temperature. In contrast, the wear rate at 500 °C is much larger than those at room temperature and 200 °C. The mechanisms for graphene to decrease the friction coefficient and improve the wear resistance of chemically bonded ceramic coatings at evaluated temperatures are clarified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Preparation and photocatalytic activity of chemically-bonded phosphate ceramics containing TiO210.1016/j.apsusc.2017.01.239 ↗
2. Microstructure and tribological behaviour of alumina composites reinforced with SiC-graphene core-shell nanoparticles10.1016/j.triboint.2018.10.009 ↗
3. Multilayer design of CrN/MoN superhard protective coatings and their characterisation
4. Graphene: a new emerging lubricant10.1016/j.mattod.2013.12.003 ↗
5. Few layer graphene to reduce wear and friction on sliding steel surfaces10.1016/j.carbon.2012.11.061 ↗
6. Preparation and corrosion behavior of chemically bonded ceramic coatings reinforced with ZnO-MWCNTs composite10.1088/2053-1591/ab1c26 ↗
7. An analysis of tribological performance on Cr/GLC film coupling with Si3N4, SiC, WC, Al2O3 and ZrO2 in seawater10.1016/j.triboint.2015.12.010 ↗
8. Chemically-bonded phosphate ceramics obtained from aluminum anodizing waste for use as coatings10.1016/j.ceramint.2014.06.039 ↗
9. Preparation and corrosion mechanism of graphene-reinforced chemically bonded phosphate ceramics10.1007/s10971-016-4061-9 ↗
10. Scale effects in abrasive wear of composite sol–gel alumina coated light alloys10.1016/S0043-1648(01)00704-9 ↗
11. Study on the preparation and mechanical properties of alumina ceramic coating reinforced by graphene and multi-walled carbon nanotube10.1134/S1070427217050238 ↗
12. Improving tribological performance of chemically bonded phosphate ceramic coatings reinforced by graphene nano-platelets10.1016/j.ceramint.2017.06.116 ↗
13. Chemically bonded phosphate ceramics composites reinforced with graphite nanoplatelets10.1016/j.compositesa.2010.12.007 ↗
14. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
15. Novel anticorrosion coatings prepared from polyaniline/graphene composites10.1016/j.carbon.2012.06.043 ↗
16. Toughening in graphene ceramic composites10.1021/nn200319d ↗
17. Toughening of zirconia/alumina composites by the addition of graphene platelets10.1016/j.jeurceramsoc.2012.07.007 ↗
18. Enhanced mechanical properties of graphene-based poly (vinyl alcohol) composites10.1021/ma902862u ↗
19. Thermal stability of polycarbonate-graphene nanocomposite foams10.1016/j.polymdegradstab.2012.05.027 ↗
20. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗