Effect of Ni and graphene on microstructure and toughness of titanium boride ceramic tool material prepared by spark plasma sintering
Source abstract
Abstract
Abstract TiB2/TiC ceramic tool material toughened by Ni and graphene nanoplatelets was prepared by spark plasma sintering. Effect of Ni and graphene nanoplatelets on densification, microstructure and mechanical properties were studied. The composite containing 2 wt% Ni and 0.5 wt% graphene nanoplatelets can be fully densified at 1750 ℃ with the holding time of 5 min. Both Ni and graphene can improve densification of TiB2 ceramic. Ni also promotes more content of graphene nanoplatelets to toughening. Excess Ni leads to cracks at grain-boundaries owing to the large thermal expansion mismatch between Ni and graphene. The optimal fracture toughness is 8.3 ± 0.43 MPa m1/2. Crack bridging is the most effective toughening mechanism. Except the particle bridging, some blocky materials act as the bridging unit due to the anchoring effect of graphene. Bridging process by graphene failed by debonding of graphene from the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Characterization of hot pressed SiC whisker reinforced TiB2 based composites10.1016/j.ijrmhm.2016.08.004 ↗
2. Effects of CNTs content on the microstructure and mechanical properties of spark plasma sintered TiB2-SiC ceramics10.1016/j.ceramint.2016.10.078 ↗
3. Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials10.1016/j.msea.2006.07.012 ↗
4. Mechanical properties and microstructure of TiB2-TiC composite ceramic cutting tool material10.1016/j.ijrmhm.2012.02.011 ↗
5. Effect of Ni content on microstructures and mechanical properties of hot-pressed TiC-TiB2-Ni composite10.1016/j.msea.2016.05.053 ↗
6. Effect of Ni content on the compression properties and abrasive wear behavior of the (TiB2-TiCxNy)/Ni composites10.1016/j.ijrmhm.2012.02.007 ↗
7. Microstructure and mechanical properties of TiB2/(Ni + Mo) composites fabricated by hot pressing
8. Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials10.1016/j.msea.2014.03.036 ↗
9. Titanium-titanium diboride composites as part of a gradient armour material10.1016/j.ijimpeng.2005.04.003 ↗
10. Microstructure evolution and tribological properties of TiB2/Ni-Ta cermets10.1016/j.jeurceramsoc.2011.10.039 ↗
11. Solid solution ranges of zirconium diboride with other refractory diborides: hfb2, TiB2, TaB2, NbB2, VB2 and CrB210.1016/j.jallcom.2008.08.023 ↗
12. Synthesis, densification, and mechanical properties of TaB210.1016/j.matlet.2008.06.052 ↗
13. TaB2-based ceramics: microstructure, mechanical properties and oxidation resistance10.1016/j.jeurceramsoc.2011.07.032 ↗
14. Effect of metallic dopants on the microstructure and mechanical properties of TiB210.1016/j.jeurceramsoc.2015.03.027 ↗
15. Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites10.1016/j.ceramint.2017.07.121 ↗
16. Microstructures and properties of silicon carbide- and graphene nanoplatelet-reinforced titanium diboride composites10.1016/j.jallcom.2017.09.244 ↗
17. Microstructure and mechanical properties of TiB2 ceramics enhanced by SiC particles and carbon nanotubes10.1016/j.ceramint.2015.11.096 ↗
18. Pore and microstructure change induced by SiC whiskers and particles in porous TiB2-TiC-Ti3SiC2 composites10.1016/j.ceramint.2016.02.052 ↗
19. Development and evaluation of TiB2-AlN ceramic composites sintered by spark plasma10.1016/j.ceramint.2016.09.010 ↗
20. High-strength TiB2-TaC ceramic composites prepared using reactive spark plasma consolidation10.1016/j.ceramint.2015.09.065 ↗
21. Effect of ZrB2 and SiC addition on TiB2-based ceramic composites prepared by spark plasma sintering10.1016/j.ijrmhm.2014.05.019 ↗
22. Effects of sintering processes on mechanical properties and microstructure of TiB2-TiC+8 wt% nano-Ni composite ceramic cutting tool material10.1016/j.msea.2012.02.002 ↗
23. Densification and oxidation behavior of a novel TiB2-MoSi2-CrB2 composite10.1016/j.ijrmhm.2012.09.006 ↗
24. Effect of AlN-Y2O3 addition on the properties and microstructure of in-situ strengthened SiC-TiB2 composites prepared by hot pressing10.1016/j.ceramint.2013.06.105 ↗
25. Effect of CrB2 addition on densification, properties and oxidation resistance of TiB210.1016/j.ijrmhm.2009.06.004 ↗
26. Alumina/zirconia composites toughened by the addition of graphene flakes10.1016/j.ceramint.2017.05.025 ↗
27. Effect of graphene addition on the mechanical and electrical properties of Al2O3-SiCw ceramics10.1016/j.jeurceramsoc.2017.01.027 ↗
28. Effect of graphite nanoplatelets on the mechanical properties of alumina-based composites10.1016/j.ceramint.2017.05.345 ↗
29. Fracture characteristics of SiC/graphene platelet composites10.1016/j.jeurceramsoc.2017.04.067 ↗
30. Spark plasma sintering of graphene reinforced silicon carbide ceramics10.1016/j.ceramint.2017.04.042 ↗
31. Effect of SiC whiskers and graphene nanosheets on the mechanical properties of ZrB2-SiCw-Graphene ceramic composites10.1016/j.ceramint.2016.06.014 ↗
32. Elastic properties of silicon nitride ceramics reinforced with graphene nanofillers10.1016/j.matdes.2015.08.044 ↗
33. Microstructure and anisotropy of mechanical properties of graphene nanoplate toughened Al2O3-based ceramic composites10.1016/j.ceramint.2016.07.121 ↗
34. Mechanical properties and toughening mechanisms of graphene platelets reinforced Al2O3/TiC composite ceramic tool materials by microwave sintering10.1016/j.msea.2016.10.100 ↗
35. Reinforcement of Al2O3/TiC ceramic tool material by multi-layer graphene10.1016/j.ceramint.2017.05.353 ↗
36. Toughening mechanisms and mechanical properties of graphene nanosheet-reinforced alumina10.1016/j.matdes.2015.09.125 ↗
37. Graphene nanosheets toughened TiB2-based ceramic tool material by spark plasma sintering10.1016/j.ceramint.2018.02.098 ↗
38. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
39. Oxidation behavior of graphene nanoplatelet reinforced tantalum carbide composites in high temperature plasma flow10.1016/j.carbon.2013.10.010 ↗
40. Improved mechanical properties of magnesiumegraphene composites with copper-graphene hybrids10.1179/1743284714Y.0000000726 ↗