Cracking behavior of ZrB2-SiC-Graphite sharp leading edges during thermal shock
Source abstract
Abstract
Abstract Crack initiation and propagation of ZrB2-SiC-Graphite (ZSG) sharp leading edges (SLEs) subjected to thermal shock were systematically evaluated by the water spraying method followed by a crack dyeing treatment. Distinct differences in the crack patterns among different test conditions were observed, and the cracking behavior of ZSG SLEs (including crack initiation time, crack number and critical failure temperature) was revealed to be strongly dependent on both the cooling rate and the microstructure. The crack propagation during thermal shock could be considered as a quasistatic process (crack speed was lower than 1 cm/s) that needed to be driven by continuous cooling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Velocity Impact and Material Behavior · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Mechanical properties and thermal shock resistance of ZrB2-SiC ceramic toughened with graphite flake and SiC whiskers10.1016/j.scriptamat.2009.07.001 ↗
2. Effect of graphite flake on the mechanical properties of hot pressed ZrB2-SiC ceramics10.1016/j.matlet.2008.07.027 ↗
3. Ultra-high-temperature tensile properties and fracture behavior of ZrB2-based ceramics in air above 1500 °C10.1016/j.matdes.2013.05.045 ↗
4. Effect of oxidation at 1100 °C on the strength of ZrB2-SiC-graphite ceramics10.1016/j.jallcom.2011.03.163 ↗
5. D.E. Glass, Physical challenges and limitations confronting the use of UHTCS on hypersonic vehicles, AIAA Paper, 2304, 2011.10.2514/6.2011-2304 ↗
6. Mechanical enhancement of lightweight ZrB2-modified carbon-bonded carbon fiber composites with self-grown carbon nanotubes10.1016/j.carbon.2016.02.077 ↗
7. J. Reuther, D. Kinney, S. Smith, et al., A reusable space vehicle design study exploring sharp leading edges, in: Proceedings of the 35th AIAA Thermophysics Conference. Anaheim CA, June 2001, pp. 2002–2884.10.2514/6.2001-2884 ↗
8. Spark plasma sintering and hot pressing of ZrB2-SiCW ultra-high temperature ceramics10.1016/j.jallcom.2007.11.018 ↗
9. The failure mechanism of ZrB2-SiC-graphite composite heated by high electric current10.1016/j.matlet.2009.08.004 ↗
10. Effect of environment atmosphere on thermal shock resistance of the ZrB2-SiC-graphite composite10.1016/j.matdes.2013.03.025 ↗
11. Thermal shock resistance of a ZrB2-SiC-graphite composite in low oxygen partial pressure environment10.1016/j.ceramint.2012.12.074 ↗
12. Microstructure and thermal shock behavior of ZrB2-SiC-graphite composite10.1016/j.matchemphys.2008.07.095 ↗
13. Thermal shock behavior of ZrB2-20 vol% SiC-15 vol% Graphite flake by hot pressing10.1142/S0217979209060622 ↗
14. Thermal shock properties of ZrB2-SiCp-Graphite and ZrB2-SiCp-AlN ceramic matrix composite material10.2174/1874088X01105010199 ↗
15. Mechanical properties and thermal shock behavior of bionic laminated ZrB2-SiC-G ceramics10.1016/j.ijrmhm.2015.04.023 ↗
16. A novel method to evaluate the thermal shock behavior of ZrB2-SiC-graphite composites under alternating complex thermal stress environments10.1016/j.ceramint.2016.06.209 ↗
17. Oxidation-resistant ZrB2-SiC composites at 2200 °C10.1016/j.compscitech.2007.08.017 ↗
18. Ablation behavior and mechanism of double-layer ZrB2-based ceramic coating for lightweight carbon-bonded carbon fiber composites under oxyacetylene flame at elevate temperature10.1016/j.jallcom.2017.01.242 ↗
19. Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2-SiC matrix ultrahigh temperature ceramics10.1016/j.jallcom.2009.04.109 ↗
20. Effects of graphite flake diameter on mechanical properties and thermal shock behavior of ZrB2-nanoSiC-graphite ceramics10.1016/j.ijrmhm.2013.02.015 ↗
21. An aqueous polymer quenching medium for instantaneous thermal shock cooling rate study of ceramic materials10.1016/j.jallcom.2017.07.032 ↗
22. Effect of surface oxidation on thermal shock resistance of ZrB2-SiC-G composite10.1016/j.ijrmhm.2009.10.013 ↗
23. Size effect of thermal shock crack patterns in ceramics and numerical predictions10.1016/j.jeurceramsoc.2014.10.032 ↗
24. An ascending thermal shock study of ceramics: size effects and the characterization method10.1016/j.matchemphys.2017.09.042 ↗
25. Thermal shock behavior of ZrB2-based sharp leading edges evaluated by a novel water spraying method10.1016/j.ceramint.2017.10.206 ↗
26. ZrB2-SiC sharp leading edges in high enthalpy supersonic flows10.1111/j.1551-2916.2012.05226.x ↗
27. Jin · 2015
28. Accurate measurement of fracture toughness in structural ceramics10.1016/j.jeurceramsoc.2017.05.027 ↗
29. Effects of mechanical shock on thermal shock behavior of ceramics in quenching experiments10.1016/j.ceramint.2016.10.021 ↗
30. Factors affecting thermal stress resistance of ceramic materials10.1111/j.1151-2916.1955.tb14545.x ↗
31. Thermal shock resistance enhancement of functionally graded materials by multiple cracking10.1016/j.actamat.2005.10.036 ↗
32. Lawn · 1993
33. Observation of ceramic cracking during quenching10.1111/jace.14674 ↗
34. A study of the mechanism of formation and numerical simulations of crack patterns in ceramics subjected to thermal shock10.1016/j.actamat.2012.05.020 ↗
35. Initiation of a periodic array of cracks in the thermal shock problem: a gradient damage modeling10.1016/j.jmps.2013.09.003 ↗