Fabrication and abrasive wear behavior of ZrO2-SiC-Al2O3 ceramic
Source abstract
Abstract
Abstract In this paper, ZrO 2 -SiC-Al 2 O 3 ceramic was fabricated by as-prepared ZrO 2 -SiC powders and commercial α-Al 2 O 3 powders, sintered at 1450 °C for 1 h. ZrO 2 -SiC composite powders were synthesized through carbothermal reduction with zircon as raw material and carbon black as the reductant. Through ZrO 2 -SiC-Al 2 O 3 ceramic mechanical properties measurements it was indicated that this ceramic had excellent properties in both bending strength and hardness. In addition, ZrO 2 -SiC-Al 2 O 3 ceramic abrasive wear property was measured. ZrO 2 -SiC-Al 2 O 3 ceramic mass loss increased along with the increase in both wheel rate and applied load. The type of wear particles had an important effect on abrasive wear resistance. ZrO 2 -SiC-Al 2 O 3 ceramic displayed excellent abrasive wear resistance in bentonite and quartz slurries in comparison with SiC slurry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Effects of grain size and ceria addition on ageing behaviour and tribological properties of Y-TZP ceramics10.1016/S0955-2219(97)00153-2 ↗
2. Zirconia as a ceramic biomaterial10.1016/S0142-9612(98)00010-6 ↗
3. Microstructure and high-temperature mechanical properties of ZrO 2 -Al 2 O 3 -SiC ceramics10.1007/s11665-015-1650-7 ↗
4. Influence of sintering temperature on pore structure and electrical properties of technologically modified MgO-Al2O3 ceramics
5. Al 2 O 3-fiber-reinforced porous YSZ ceramics with high mechanical strength10.1016/j.ceramint.2014.03.005 ↗
6. Synthesis, biocompatibility and mechanical properties of ZrO2-Al2O3 ceramics composites10.4012/dmj.2015-028 ↗
7. Laminated structure optimization and drawing performance of Al 2 O 3–TiC/Al 2 O 3–TiC–CaF 2 self-lubricating laminated ceramic conical die10.1016/j.ceramint.2015.06.016 ↗
8. Mechanical properties of La2O3 and Nb2O5 doped Al2O3 ceramics prepared by microwave sintering10.2109/jcersj2.122.166 ↗
9. Drilling a magnesium alloy using PVD coated twist drills10.1016/S0924-0136(02)01111-1 ↗
10. Wear-in behaviour of polycrystalline diamond thrust bearings10.1016/j.wear.2010.12.059 ↗
11. Fabrication and liquid–solid, two-phase erosion wear behaviour of β-Sialon ceramic from pyrophyllite by carbothermal reduction and nitridation10.1016/j.ceramint.2014.03.061 ↗
12. Influence of yttria addition on the phase transformations of zirconia from zircon ore by carbothermal reduction process10.1016/j.solidstatesciences.2012.03.021 ↗
13. Synchronistic preparation of fibre-like SiC and cubic-ZrO 2/SiC composite from zircon via carbothermal reduction process10.1016/j.materresbull.2012.09.058 ↗
14. Synthesis of ZrN–Si 3 N 4 composite powders from zircon and quartz by carbothermal reduction and nitridation10.1016/j.powtec.2013.06.029 ↗
15. Microstructure–toughness–wear relationship of tetragonal zirconia ceramics10.1016/S0955-2219(03)00355-8 ↗
16. Phase composition of SiC-ZrO2 composite materials synthesized from zircon doped with La2O310.1016/S1002-0721(08)60339-7 ↗
17. Vickers hardness study of zirconia partially stabilized with lanthanide group oxides10.1016/S0254-0584(97)02057-9 ↗
18. Processing and characterization of pure cordierite and zirconia-doped cordierite ceramic composite by precipitation technique10.1007/s12034-015-0902-3 ↗
19. Martensitic transformation thermodynamic calculation of ZrO2–MgO system10.1080/01411594.2012.658052 ↗
20. Interfacial reaction behavior and bonding mechanism between liquid Sn and ZrO 2 ceramic exposed in ultrasonic waves
21. Fabrication and microstructure of Al 2 O 3–ZrO 2 (3Y)–SiC nanocomposites10.1016/S0955-2219(99)00026-6 ↗
22. Mechanical properties and solid particle erosion behavior of LaMgAl11O19–Al2O3 ceramic at room and elevated temperatures10.1111/jace.14205 ↗
23. Influence of LaMgAl11O19 On solid particle impact erosion wear behavior of 3YSZ ceramic at elevated temperatures10.1111/ijac.12268 ↗
24. A study on the wear resistance of ZrO 2/Al 2 O 3 ceramic scissors for spinning and weaving10.1361/105994902770343584 ↗