New insight into the modification of Li-rich cathode material by stannum treatment
Source abstract
Abstract
In this work, Sn is used to dope the Li-rich cathode material to improve the electrochemical performance of Li ion battery. After Sn treatment, the lattice parameters a, c and lattice volume V become larger. Compared with the pristine sample, the Sn-contained samples show longer plateaux at about 4.5 V in the first charging process, which means that Sn can activate the Li2MnO3 component. Meanwhile, with appropriate content of Sn doping, the sample exhibits enhanced rate capability and cycling stability. Especially, the sample S10 shows the best electrochemical performance, with a capacity retention of 88.66% after 100 cycles at 1 C (1 C=250 mA g−1). The mechanisms of Sn doping have also been investigated. The increased activation of Li2MnO3 is due to the improved conductivity of Li2MnO3 phase by Sn doping, and the enhanced electrochemical performance is mainly ascribed to the increased ability of Li ion diffusing into bulk phase and the improved structure stability during the prolonged charge-discharge cycles. It is suggested that Sn doping is an effective way to improve the electrochemical performance of Li-rich cathode material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. XPS investigation of the electrolyte induced stabilization of LiCoO2 and AlPO4-coated LiCoO2 composite electrodes10.1149/2.0851602jes ↗
2. Role of zirconium dopant on the structure and high voltage electrochemical performances of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium ion batteries10.1016/j.electacta.2015.11.093 ↗
3. A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: a case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O210.1016/j.jpowsour.2016.12.095 ↗
4. Improving the electrochemical performance of lithium vanadium fluorophosphate cathode material: focus on interfacial stability10.1016/j.jpowsour.2016.08.131 ↗
5. Li2MnO3-stabilized LiMO2 (M=Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
6. Synthesis and performances of Li-Rich@AlF3@Graphene as cathode of lithium ion battery10.1016/j.electacta.2016.02.043 ↗
7. Manipulating the electronic structure of Li‐rich manganese‐based oxide using polyanions: towards better electrochemical performance10.1002/adfm.201400436 ↗
8. Optimally designed interface of lithium rich layered oxides for lithium ion battery10.1016/j.jallcom.2017.03.101 ↗
9. A novel architecture designed for lithium rich layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 oxides for lithium-ion batteries10.1039/C5TA04424C ↗
10. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
11. Preparation and electrochemical performance of Li-rich layered cathode material Li[Ni0.2Li0.2Mn0.6]O2 for lithium-ion batteries10.1007/s10800-009-0057-2 ↗
12. High-energy cathode materials (Li2MnO3–LiMO2) for lithium-ion batteries10.1021/jz400032v ↗
13. Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction10.1016/j.jpowsour.2012.11.144 ↗
14. Influence of Li2O content on the structural and electrochemical properties of layered-layered-spinel composite cathode materials LixMn4/6Ni1/6Co1/6O(1.75+0.5x)10.1016/j.electacta.2014.06.115 ↗
15. Electrochemical and Structural Properties of xLi2MO3·(1−x)LiMn0.5Ni0.5O2 Electrodes for Lithium Batteries (M=Ti, Mn, Zr; 0≤x≤0.3)10.1021/cm0306461 ↗
16. Suppression of irreversible capacity loss in Li-rich layered oxide by fluorine doping10.1016/j.jpowsour.2016.02.058 ↗
17. Synthesis and electrochemical performance of Li-rich cathode material Li[Li0.2Ni0.16Mn0.56Co0.06Al0.02]O2 in the lithium-ion battery10.1016/S1452-3981(23)11295-8 ↗
18. Al doping for mitigating the capacity fading and voltage decay of layered Li and Mn‐rich cathodes for Li‐Ion batteries10.1002/aenm.201502398 ↗
19. Facile synthesis and performance of Na-doped porous lithium-rich cathodes for lithium ion batteries10.1039/C6RA09042G ↗
20. Ti-substituted Li[Li0.26Mn0.6−xTixNi0.07Co0.07]O2 layered cathode material with improved structural stability and suppressed voltage fading10.1039/C5TA03764F ↗
21. Toward a stabilized lattice framework and surface structure of layered lithium-rich cathode materials with Ti modification10.1039/C5CP00853K ↗
22. Enhanced electrochemical performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for lithium-ion batteries10.1016/j.jpowsour.2016.03.101 ↗
23. Synthesis and electrochemical characterization of Zn-doped Li-rich layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material10.1016/j.ceramint.2015.05.102 ↗
24. Electrochemical performance of zirconium doped lithium rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with porous hollow structure10.1016/j.jpowsour.2015.09.025 ↗
25. Synthesis and electrochemical study of Zr-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 as cathode material for Li-ion battery10.1016/j.ceramint.2015.08.104 ↗
26. Co-modification of LiNi0.5Co0.2Mn0.3O2 cathode materials with zirconium substitution and surface polypyrrole coating: towards superior high voltage electrochemical performances for lithium ion batteries10.1016/j.electacta.2016.02.156 ↗
27. Synthesize and electrochemical characterization of Mg-doped Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 cathode material10.1016/j.electacta.2013.05.145 ↗
28. Excellent rate capability of Mg doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 cathode material for lithium-ion battery10.1016/j.electacta.2014.05.043 ↗
29. Effects of Sn doping on the structural and electrochemical properties of Li1.2Ni0.2Mn0.8O2 Li-rich cathode materials10.1016/j.electacta.2015.05.068 ↗
30. Improved kinetics of LiNi1/3Mn1/3Co1/3O2 cathode material through reduced graphene oxide networks10.1039/c2cp23363k ↗
31. Sn-stabilized Li-rich layered Li(Li0.17Ni0.25Mn0.58)O2 oxide as a cathode for advanced lithium-ion batteries10.1039/C5TA03415A ↗
32. Synthesis of LiNiO2 in air atmosphere: x-ray diffraction characterization and electrochemical investigation10.1016/S0378-7753(96)02402-0 ↗
33. Improved electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2 by Mg doping for lithium ion battery cathode material10.1039/C4TA01790K ↗
34. Optimized synthetic conditions of LiNi0.5Co0.2Mn0.3O2 cathode materials for high rate lithium batteries via co-precipitation method10.1149/2.004302jes ↗
35. Initial coulombic efficiency improvement of the Li1.2Mn0.567Ni0.166Co0.067O2 lithium-rich material by ruthenium substitution for manganese10.1039/c2jm33484d ↗
36. Effect of Ru substitution on the first charge–discharge cycle of lithium-rich layered oxides10.1039/C4TA05178E ↗
37. Dual modification of hematite photoanode by Sn-doping and Nb2O5 layer for water oxidation10.1016/j.apcatb.2016.08.059 ↗
38. Fabrication of superior α-Fe2O3 nanorod photoanodes through ex-situ Sn-doping for solar water splitting10.1016/j.solmat.2015.09.016 ↗
39. E. Kendrick, Development of novel high energy density Sn-doped sodium layered oxide cathode materials, in: Proceedings of the 18th International Meeting on Lithium Batteries, Ecs, June 19–24, 2016.
40. Oxygen vacancies in SnO2 surface coating to enhance the activation of layered Li-Rich Li1.2Mn0.54Ni0.13Co0.13O2 cathode material for Li-ion batteries10.1016/j.jpowsour.2016.09.051 ↗
41. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
42. Electrochemical impedance spectroscopy analysis for oxygen reduction reaction in 3.5% NaCl solution10.1007/s10008-008-0570-y ↗
43. Studies on electrochemical behaviour of zinc-doped LiFePO4 for lithium battery positive electrode10.1016/j.jallcom.2008.10.077 ↗
44. Structural and electrochemical characterization of layered 0.3Li2MnO3·0.7LiMn0.35−x/3Ni0.5−x/3Co0.15−x/3CrxO2 cathode synthesized by spray drying10.1016/j.apt.2013.10.008 ↗