Influence of particle size and aggregation state of alumina on the rheology of a ceramic paste with an organic binder of ethylene–vinyl acetate copolymer and stearic acid
Source abstract
Abstract
Abstract The flow behavior of ceramic pastes with various alumina powder contents and different particle sizes, L-particles ( D ave. = 6.7 μm) and S-particles ( D ave. = 0.13 μm), in an organic binder of ethylene–vinyl acetate copolymer and stearic acid was investigated by dynamic viscoelasticity measurements. The rheological properties of ceramic pastes with high powder content over 19 vol% could not be investigated by the rotational method due to the high viscosity, and were analyzed by the oscillation method. Relative dynamic complex viscosities increased with the powder content, and were consistent with the Dougherty–Krieger model for evaluation of the apparent hydrodynamic shape factor ( K H ) and the maximum powder content ( f c r v ). The f c r v and K H of the L-paste were 0.62 and 1.6, and those of the S-paste were 0.59 and 8.2, respectively. It is considered that the L-particles were comparatively well dispersed and S-particles were aggregated in the paste. These analyses agreed with the aggregates of S-particles determined by SEM observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rheology and Fluid Dynamics Studies · Innovations in Concrete and Construction Materials · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Influence of stearic acid on suspension structure and green micro structure of injection-molded zirconia ceramics10.1016/S0272-8842(98)00024-8 ↗
2. Influence of powder particle size distribution on rheological properties of 316L powder injection moulding feedstocks10.1016/j.powtec.2010.02.003 ↗
3. Flow behaviour of ceramic injection moulding suspensions10.1016/0272-8842(92)90095-U ↗
4. Aggregation and dispersion behaviour control of nanoparticles in liquid phase10.4164/sptj.46.605 ↗
5. A mechanism for non-Newtonian flow in suspension of rigid spheres10.1122/1.548848 ↗
6. Viscosity and powder dispersion in ceramic injection molding mixtures10.1252/jcej.33.168 ↗
7. Rheology of saturated systems (slurries and pastes)
8. Production of alumina parts by powder injection molding with a binder system based on high density polyethylene10.1016/j.jeurceramsoc.2007.08.004 ↗
9. Effects of PEG molecular weights on flow behavior of alumina injection molding feedstocks10.1016/S0254-0584(02)00203-1 ↗
10. Prediction of shear viscosity for ceramic injection molding mixtures10.1252/jcej.33.927 ↗
11. Rheological properties of alumina feedstocks for the low-pressure injection moulding process10.1016/j.jeurceramsoc.2008.11.001 ↗
12. Rheological characterization and coagulation casting of Al2O3–nano zirconia suspensions10.1111/j.1551-2916.2007.02010.x ↗
13. Thixotropy – a review10.1016/S0377-0257(97)00004-9 ↗
14. The effect of surfactant adsorption on sedimentation behaviors of Al2O3–toluene suspensions10.1016/S0921-5093(01)01331-4 ↗