journal article·2009-01

High-pressure sintered yttria stabilized zirconia ceramics

Q. Li, Y.F. Zhang, X.F. Ma, J. Meng, X.Q. Cao

Ceramics International· Volume 35· Issue 1
Publisher page

Abstract

Fast densification of 8YSZ ceramics under a high pressure of 4.5 GPa was carried out at different temperatures (800, 1000, 1450 degrees C), by which a high relative density above 92% could be obtained. FT-Raman spectra indicate that the 8YSZ underwent a phase transition from partially tetragonal to partially cubic phase as temperatures increase from 1000 to 1450 degrees C when sintering under high pressure. The electrical properties of the samples under different high-pressure sintering conditions were measured by complex impedance method. The total conductivity of 0.92 x 10(-2) S cm(-1) at 800 degrees C has been obtained for 8YSZ under high pressure at 1450 degrees C, which is about 200 degrees C lower than that of the samples prepared by conventional pressureless sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Nuclear Materials and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Preparation of Y-TZP Nanoceramics by gelcasting-pressing method and pressureless sintering10.1002/adem.200500216 ↗
2. Low temperature processing of dense samarium-doped CeO2 ceramics: sintering and grain growth behaviors10.1016/j.actamat.2004.01.014 ↗
3. Low temperature processing of dense nanocrystalline scandia-doped zirconia (ScSZ) ceramics
4. Fast low-temperature consolidation of bulk nanometric ceramic materials10.1016/j.scriptamat.2005.11.015 ↗
5. Densification of plasma sprayed YSZ electrolytes by spark plasma sintering (SPS)10.1016/S0955-2219(02)00421-1 ↗
6. Enhancement of conductivity in La2Mo2O9 ceramics fabricated by a novel three-stage thermal processing method10.1016/j.ssi.2006.07.022 ↗
7. Ionic conductivity and microstructure of solid electrolyte La2Mo2O9 prepared by spark-plasma sintering10.1016/j.jeurceramsoc.2004.08.023 ↗
8. Enhanced ionic conductivity in nanostructured, heavily doped ceria ceramics10.1002/adfm.200500186 ↗
9. Densification and properties of zirconia prepared by three different sintering techniques10.1016/j.ceramint.2006.07.005 ↗
10. Fabrication of nano Y–TZP materials by superhigh pressure compaction10.1016/S0955-2219(00)00182-5 ↗
11. Preparation and characterization of bulk and nano particles of La2Zr2O7 and Nd2Zr2O7 by sol–gel method
12. Doping and grain size effects in nanocrystalline ZrO2–Sc2O3 system with complex phase transitions: XRD and Raman studies10.1039/B413701A ↗
13. Fast densification and electrical conductivity of yttria-stabilized zirconia nanoceramics10.1016/j.mseb.2006.12.012 ↗
14. Infrared and Raman spectra of zirconia polymorphs10.1111/j.1151-2916.1971.tb12283.x ↗
15. Phase transformation in the surface region of zirconia detected by UV Raman spectroscopy10.1021/jp010526l ↗