Improvement in bioactivity and corrosion resistance of Ti by hydroxyapatite deposition using ultrasonic mechanical coating and armoring
Source abstract
Abstract
Abstract In the present work, nanostructured hydroxyapatite (HA)-containing coating was prepared on a Ti surface by ultrasonic mechanical coating and armoring (UMCA). A Ti plate was pre-coated with HA slurry, followed by UMCA, which was achieved by high-frequency ZrO2 ball bombardment. The UMCA process comprised several cycles of pre-coating and ball bombardment, providing high amounts of HA and good coating adhesion. The coating mainly consisted of nano-HA particles (less than 10 nm) and a small amount of Ti. Furthermore, the deformation structures of the Ti surface region were characterized in a nanocrystalline layer with a grain size of 50–200 nm. Additionally, the coating exhibited improved bioactivity and corrosion resistance in Hanks’ balanced salt solution than the Ti surface. Furthermore, the in vitro cytotoxicity test assessed that the HA-containing coating was non-cytotoxic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Surface Treatment and Residual Stress · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Biotechnology, material sciences and bone repair10.1007/BF01782892 ↗
2. Bioceramics: from concept to clinic10.1111/j.1151-2916.1991.tb07132.x ↗
3. Dip coating of nano hydroxyapatite on titanium alloy with plasma assisted γ-alumina buffer layer: a novel coating approach
4. The influence of the substrate on the adhesive strength of themicro-arc oxidation coating developed on TiNi shape memory alloy10.1016/j.apsusc.2016.09.001 ↗
5. Microstructure and surface characteristics of hydroxyapatite coating on titanium and Ti-30Nb-1Fe-1Hf alloy by anodic oxidation and hydrothermal treatment10.1016/j.surfcoat.2010.10.063 ↗
6. Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys10.1016/j.jmatprotec.2017.02.018 ↗
7. Microstructure and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering10.1016/S0257-8972(03)00729-1 ↗
8. Laser-assisted laser ablation method for high-quality hydroxyapatite coating onto titanium substrate10.1016/j.surfcoat.2009.07.004 ↗
9. Plasma sprayed hydroxyapatite(HA) coatings produced with flame spheroidised powders10.1016/S0924-0136(96)02634-9 ↗
10. Phase transformation on hydroxyapatite decomposition10.1016/j.ceramint.2012.10.221 ↗
11. Hydroxyapatite dip coated and uncoated titanium poly-axial pedicle screws: an in vivo bovine model10.1097/01.brs.0000210221.00778.c7 ↗
12. Effect of gun current on the microstructure and crystallinity of plasma sprayed Hydroxyapatite coating10.1016/j.apsusc.2007.02.183 ↗
13. Structure, mechanical performance and electrochemical characterization of plasma sprayed SiO2/Ti-reinforced hydroxyapatite biomedical coatings10.1016/j.apsusc.2008.09.088 ↗
14. Hydroxyapatite/titania nanocomposites derived by combining high-energy ball milling with spark plasma sintering processes10.1016/j.jeurceramsoc.2008.05.016 ↗
15. An insight into formation of nanostructured coatings on metallic substrates by planetary ball milling10.1016/j.powtec.2015.03.026 ↗
16. New coating technique for Al–B4C composite coatings by mechanical milling and composite coating10.1007/s11106-015-9662-2 ↗
17. Microstructure and properties of Fe–Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying10.1007/s00170-014-5851-2 ↗
18. Fabrication of Al–Si coating on Ti–6Al–4V substrate by mechanical alloying10.1080/10426914.2017.1292038 ↗
19. Mechanical metallization of alumina substrate through shot impact treatment10.1016/j.jeurceramsoc.2013.08.022 ↗
20. Fabrication of Ti–Al coatings by mechanical alloying method10.1016/j.surfcoat.2006.06.044 ↗
21. Development of a novel method for mechanical plating using ultrasonic vibrations10.1016/j.surfcoat.2007.01.002 ↗
22. Nanostructured coatings produced by a novel ultrasonic-assisted method: coating characterisation and formation mechanism10.1016/j.surfcoat.2009.12.012 ↗
23. Improvement in tribological behavior of commercial pure titanium (CP-Ti) by surface mechanical attrition treatment (SMAT)10.1016/j.triboint.2017.11.044 ↗
24. Nanostructure formation mechanism of α-titanium using SMAT10.1016/j.actamat.2004.05.023 ↗
25. Effect of surface mechanical attrition treatment on corrosion resistance of commercial pure titanium10.1016/j.surfcoat.2015.08.041 ↗
26. Effect of surface nanocrystallization on the corrosion behavior of Ti–6Al–4V titanium alloy10.1016/j.surfcoat.2013.02.052 ↗
27. Surface mechanical attrition treatment induced phase transformation behavior in NiTi shape memory alloy10.1016/j.jallcom.2009.04.004 ↗
28. High-temperature surface alloying of nanocrystalline nickel produced by surface mechanical attrition treatment10.1016/j.jallcom.2010.09.088 ↗
29. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
30. Improvement in tribocorrosion behavior of 304 stainless steel by surface mechanical attrition treatment10.1016/j.surfcoat.2014.05.057 ↗
31. Surface nanocrystallization of Mg-3 wt.% Li-6 wt.% Al alloy by surface mechanical attrition treatment10.1016/j.matchar.2016.08.017 ↗
32. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment10.1016/j.msea.2003.10.261 ↗
33. PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: morphology, mechanical properties and bioactivity10.1016/j.msec.2013.09.036 ↗
34. Preparation of bioactive Ti6Al4V surfaces by a simple method10.1016/S0142-9612(97)00232-9 ↗
35. Evaluation of hemocompatibility and in vitro immersion on microwave-assisted hydroxyapatite–alumina nanocomposites10.1016/j.msec.2015.01.054 ↗
36. S.W. Russell, K.A. Luptak, C.T.A. Suchicital, T.L. Alford, V.B. Pizziconi, Chemical and structural evolution of sol-gel-derived hydroxyapatite thin films under rapid thermal processing. J. Am. Ceram. Soc. 79(4) 1996 837-842.10.1111/j.1151-2916.1996.tb08514.x ↗
37. Chemical and structural evolution of sol-gel-derived hydroxyapatite thin films under rapid thermal processing10.1111/j.1151-2916.1996.tb08514.x ↗
38. A new method for the solid-state synthesis of tetracalcium phosphate, a dental cement: X-ray powder diffraction and IR studies10.1016/S0955-2219(96)00196-3 ↗
39. A.H. Rajabi-Zamani, A. Behnamghader, A. Kazemzadeh, Synthesis of nanocrystalline carbonated hydroxyapatite powder via nonalkoxide sol–gel method, Mater. Sci. Eng. C 28(8) 2008 1326-1329.10.1016/j.msec.2008.02.001 ↗
40. FTIR monitoring of the growth of the carbonate containing apatite layers from simulated and natural body fluids10.1016/S0022-2860(99)00170-2 ↗
41. Preparation and characterization of nano-hydroxyapatite powder using sol-gel technique10.1007/s12034-009-0069-x ↗
42. Biologic response to carbonated hydroxyapatite associated with orthopedic device: experimental study in a rabbit model10.4132/KoreanJPathol.2012.46.1.48 ↗
43. Study on a hydrophobic Ti-doped hydroxyapatite coating for corrosion protection of a titanium based alloy10.1039/C6RA03397K ↗
44. Investigation on the corrosion behavior and biocompatibility of Ti-6Al-4V implant coated with HA/TiN dual layer for medical applications10.1016/j.surfcoat.2020.126044 ↗
45. Sol-Gel derived hydroxyapatite coatings for titanium implants: a review10.3390/bioengineering7040127 ↗
46. Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application
47. Cellulose acetate/hydroxyapatite/chitosan coatings for improved corrosion resistance and bioactivity10.1016/j.msec.2015.01.020 ↗
48. Deformation behaviour of commercially pure titanium at extreme strain rates10.1016/j.actamat.2011.02.018 ↗
49. The effect of shot peening on the microstructure and properties of a near-alpha titanium alloy following high temperature exposure10.1016/j.actamat.2012.06.017 ↗
50. Corrosion behavior on orthopedic NiTi alloy with nanocrystalline/amorphous surface10.1016/j.matchemphys.2010.11.061 ↗