Microstructure and antioxidation performance of SiC-ZrO-MoSi 2 /Ni coated carbon fiber produced by composite electroplating
Source abstract
Abstract
Abstract To improve the oxidation resistance ability of carbon fiber (CF) in the high temperature environment, the composite electroplating method had been used to fabricate SiC-ZrO-MoSi 2 /Ni coating at the surface of CF. Both nanoparticles and Ni-matrix were plated onto CF successfully while the mechanical property of coated CF was only slightly weakened. The oxidation resistance performance of CF and the CF reinforced phenolic resin composites had been improved obviously. The microstructure of coatings was investigated by scanning electron microscope and X-ray diffraction analysis. Thermal gravimetric analysis was applied to test the anti-oxidation ability of coated CF. The mechanism of oxidation process had been discussed. It can be concluded that composite plating is an effective way to make composite coatings which can enhance the anti-oxidation ability of CF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Effect of temperature and gaseous medium on the evolved microstructures of carbon fiber reinforced reaction bonded silicon nitride composites10.1016/j.ceramint.2017.02.004 ↗
2. Machining of carbon fiber reinforced plastics/polymers: a literature review10.1115/1.4026526 ↗
3. Improvement of the strength and toughness of carbon fiber/SiC composites via chemical vapor infiltration-grown SiC nanowire interphases10.1016/j.ceramint.2017.10.197 ↗
4. Preparation and oxidation behavior of a double-layer coating for three-dimensional braided carbon fiber10.1016/j.surfcoat.2016.01.060 ↗
5. Microstructure and ablation behavior of double anti-oxidation protection for carbon-bonded carbon fiber composites10.1016/j.ceramint.2016.10.009 ↗
6. Graphene/carbon nanotube hybrid as a multi-functional interfacial reinforcement for carbon fiber-reinforced composites10.1016/j.compositesb.2017.04.005 ↗
7. A novel PAN/silazane hybrid polymer for processing of carbon-based fibres with extraordinary oxidation resistance10.1039/C6TA09293D ↗
8. Ablation behavior of advanced TaSi2-based coating on carbon-bonded carbon fiber composite/ceramic insulation tile in plasma wind tunnel
9. Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2 -SiC whisker and TaSi2 -MoSi2 -SiC whisker by slurry method10.1016/j.ceramint.2017.04.140 ↗
10. Ablation behavior of rare earth La-modified ZrC coating for SiC-coated carbon/carbon composites under an oxyacetylene torch10.1016/j.corsci.2015.11.030 ↗
11. Fabrication of gradient C/C-SiC-MoSi2 composites with enhanced ablation performance10.1016/j.ceramint.2016.04.176 ↗
12. Preparation of continuous Al2O3/Y2O3 coating on carbon fiber by a novel aqueous plasma Electrolysis10.4028/www.scientific.net/MSF.898.1575 ↗
13. NiO formation by simple air oxidation of nickel coated carbon fibers10.1166/jamr.2016.1302 ↗
14. Deposition of silicon carbide interface coating on carbon fibre by PECVD for advanced composites10.1016/j.surfin.2017.03.006 ↗
15. Dual-layer oxidation-protective plasma-sprayed SiC-ZrB2/Al2O3-carbon nanotube coating on graphite10.1007/s11666-016-0508-3 ↗
16. A self-assembled flavin protective coating enhances the oxidative thermal stability of multi-walled carbon nanotubes10.1016/j.carbon.2017.02.098 ↗
17. Preparation and mechanical performance of ductile Csf/Al2 O3–BN composites—Part 2: effects of fiber contents and ablation properties10.1016/j.ceramint.2016.04.003 ↗
18. Improvement of interaction in a composite structure by using a sol-gel functional coating on carbon fibers10.3390/ma10090990 ↗
19. Design and optimization of oxidation resistant coating for C/C aircraft brake materials10.1016/j.ceramint.2017.09.156 ↗
20. Ablation behavior and mechanism of double-layer ZrB2-based ceramic coating for lightweight carbon-bonded carbon fiber composites under oxyacetylene flame at elevate temperature10.1016/j.jallcom.2017.01.242 ↗
21. Oxidation and thermal shock resistant properties of Si/Yb2 SiO5/NdMgAl11O19 coating deposited on Cf/SiC composites10.1016/j.matdes.2016.12.022 ↗
22. Timing of polyethylene glycol addition for the control of SiO2, sol structure and sol–gel coating properties
23. Preparation of anti-oxidative SiC/SiO2, coating on carbon fibers from vinyltriethoxysilane by sol–gel method10.1016/j.apsusc.2012.11.056 ↗
24. Microstructure and oxidation protection of a MoSi2/SiO2-B2O3-Al2O3 coating for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2016.12.102 ↗
25. Comparative studies of the oxidation of MoSi2 based materials: low-temperature oxidation (300–900 °C)10.1016/j.ijrmhm.2017.02.001 ↗
26. Supersonic plasma sprayed MoSi2–ZrB2 antioxidation coating for SiC–C/C composites10.1179/1743294415Y.0000000098 ↗
27. Microstructure and ablation properties of carbon/carbon composites modified by ZrSiO410.1016/j.corsci.2013.10.031 ↗
28. Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites10.1016/j.compositesb.2015.01.052 ↗
29. GB/T3362-2005 · 2005
30. Influence of an oxidation of the carbon fiber surface by boiling nitric acid on the adhesion strength in carbon fiber‐acrylate composites cured by electron beam10.1016/j.ijadhadh.2011.11.006 ↗