Temperature dependent AC electric conduction of polymer-derived SiAlCN ceramics
Source abstract
Abstract
Abstract The polymer-derived SiAlCN ceramic was synthesized by thermal decomposition of an Al-containing polymeric precursor at 1000 °C. The impedance spectra of the ceramic were measured in the frequency range of 20 Hz to 20 MHz at temperatures up to 500 °C. The results show that the conductivity of the material increases gradually with increasing testing temperature and frequency, which behaves a typical NTC characteristic. The overlapping of normalized peaks/lines corresponding to electric modulus/electric conductivity indicates that the material follows an identical conductive mechanism regardless of frequency in the temperature range. The results also reveal that the conductivity followed T −1/4 dependence, corresponding to a 3D hopping process. Analysis of the relationship between σ 0 vs T 0 reveals that the conductive mechanism is band-tail hopping rather than variable range hopping.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics10.1111/j.1551-2916.2010.03876.x ↗
2. Fabrication of SiCN Ceramic MEMS using injectable polymer-precursor technique10.1016/S0924-4247(00)00545-8 ↗
3. Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymer10.1016/S0924-4247(01)00723-3 ↗
4. Evanescent-mode-resonator-based and antenna-integrated wireless passive pressure sensors for harsh-environment applications10.1016/j.sna.2014.09.010 ↗
5. Temperature sensor made of polymer-derived ceramics for high-temperature applications10.1016/j.sna.2014.08.012 ↗
6. Alkylaminoborazine-based precursors for the preparation of boron nitride fibers by the polymer-derived ceramics (PDCs) route10.1016/j.jeurceramsoc.2004.07.016 ↗
7. Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes10.1021/am1000085 ↗
8. Polymer-derived ceramic coatings on C/C-SiC composites10.1016/0955-2219(96)00025-8 ↗
9. Additive manufacturing of polymer-derived ceramics10.1126/science.aad2688 ↗
10. Polymer-derived SiAlCN ceramics resist oxidation at 1400 °C10.1016/j.scriptamat.2006.05.004 ↗
11. Oxidation/Corrosion of Polymer-Derived SiAlCN Ceramics in Water Vapor10.1111/j.1551-2916.2005.00791.x ↗
12. Evolution in the Electronic Structure of Polymer-derived Amorphous Silicon Carbide10.1111/jace.13598 ↗
13. Effect of acrylic acid additive on electric conductivity of polymer-derived amorphous silicon carbonitride10.1016/j.ceramint.2015.02.139 ↗
14. Enhanced electric conductivity of polymer-derived SiCN ceramics by microwave post-treatment10.1111/jace.14590 ↗
15. Electrical conductivity of dense, bulk silicon-oxycarbide ceramics10.1016/j.jeurceramsoc.2014.12.007 ↗
16. Complex Impedance Spectra of Polymer-Derived Silicon Oxycarbides10.1111/jace.12356 ↗
17. Electric conductivity and microstructure evolution of polymer-derived SiAlCO ceramics10.1016/j.ceramint.2015.11.073 ↗
18. Coupling Effect of Temperature and Stress on the Electronic Behavior of Amorphous SiAlCO10.1111/jace.14260 ↗
19. Effect of pyrolysis temperature on the electric conductivity of polymer-derived silicoboron carbonitride10.1016/j.jeurceramsoc.2014.03.012 ↗
20. Frequency-dependent conductive behavior of polymer-derived amorphous silicon carbonitride10.1016/j.actamat.2015.02.020 ↗
21. Impedance spectroscopy study on polymer-derived amorphous SiAlCO10.1111/jace.14669 ↗
22. Interface characteristics of polymer-derived amorphous SiCN ceramics investigated by impedance spectroscopy under direct current bias10.1016/j.ceramint.2017.10.153 ↗
23. Electroceramics: characterization by Impedance Spectroscopy10.1002/adma.19900020304 ↗
24. Structural, dielectric and impedance spectroscopy studies in (Bi0.90R0.10)Fe0.95Sc0.05O3 [R=La, Nd] ceramics10.1016/j.ceramint.2014.02.084 ↗
25. Dielectric dispersion and impedance spectroscopy of B3+ doped Ba(Ti0.9Sn0.1)O3 ceramics10.1016/j.ceramint.2012.10.051 ↗
26. Dielectric and impedance spectroscopy characterizations of CuO added (Na0.5Bi0.5)0.94Ba0.06TiO3 lead-free piezoelectric ceramics10.1016/j.jallcom.2013.12.167 ↗
27. Universal power law behavior of the AC conductivity versus frequency of agglomerate morphologies in conductive carbon nanotube-reinforced epoxy networks10.1002/polb.24121 ↗
28. Effect of Mn substitution on electrical and magnetic properties of Bi0.9La0.1FeO310.1063/1.3158121 ↗
29. Quantitative study on structural evolutions and associated energetics in polysilazane-derived amorphous silicon carbonitride ceramics10.1016/j.actamat.2014.03.049 ↗
30. On the thermodynamically stable amorphous phase of polymer-derived silicon oxycarbide10.1038/srep14550 ↗
31. AC conductivity/electric modulus analysis and electrical conduction mechanism of RbFeP2O7 ceramic compound10.1016/j.ceramint.2016.06.011 ↗
32. Electrical properties and relaxation behavior of Bi0.5Na0.5TiO3-BaTiO3 ceramics modified with NaNbO310.1016/j.jeurceramsoc.2016.03.011 ↗
33. Nano-clip based composites with a low percolation threshold and high dielectric constant10.1016/j.nanoen.2016.06.022 ↗
34. Process and microstructure to achieve ultra-high dielectric constant in ceramic-polymer composites10.1038/srep35763 ↗
35. Variable range hopping revisited: the case of an exponential distribution of localized states10.1016/S0022-3093(01)01008-0 ↗
36. Physics of bandtail hopping in disordered carbons10.1016/S0925-9635(03)00017-7 ↗
37. Electronic Processes
38. Scaling analysis of field-enhanced bandtail hopping transport in amorphous carbon nitride10.1002/pssb.200642043 ↗