Microstructure assessment of suspension plasma spraying coatings from multicomponent submicronic Y-TZP/Al2O3/SiC particles
Source abstract
Abstract
Abstract In this research, Suspension Plasma Spraying (SPS) technique was used for the thermal deposition of a multicomponent mixture made up of an Y-TZP/Al2O3 matrix with SiC particles. Two suspensions of Y-TZP and Al2O3 with different SiC particles content (6 wt% and 12 wt%) were tested as feedstocks in the SPS process. Three stand-off distances were varied in order to assess coating microstructure and evaluate the presence of SiC in the final coatings. Coatings were characterised in terms of porosity, microstructure and phase distribution. The estimate of the amount of SiC in the coating was carried out by XRD technique. Findings showed typical cauliflower-like SPS microstructure which intensifies with stand-off distance. Coatings porosity varied significantly between 8% and 25% whereas minimum porosity was found for the intermedium stand-off distance of 40 mm. Microstructure analysis also revealed the presence of SiC particles in the coatings which was confirmed by EDX analysis, overall XRD tests as well as TG analysis. Finally, evaluation of SiC content in the final coatings by means of XRD analysis showed that most of SiC particles (c.a 80%) of the feedstocks were preserved in the final coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Ceramic top coats of plasma-sprayed thermal barrier coatings: materials, processes, and properties10.1007/s11666-017-0597-7 ↗
2. Advances in thermal spray coatings for gas turbines and energy generation: a review10.1007/s11666-013-9904-0 ↗
3. Thermal-barrier coatings for more efficient gas-turbine engines10.1557/mrs.2012.232 ↗
4. Columnar suspension plasma sprayed coating microstructural control for thermal barrier coating application10.1016/j.jeurceramsoc.2015.11.018 ↗
5. Characterization of microstructure and thermal properties of YSZ coatings obtained by Axial Suspension Plasma Spraying (ASPS)10.1007/s11666-015-0263-x ↗
6. Thermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS)10.1016/j.surfcoat.2016.06.010 ↗
7. Review of suspension and solution precursor plasma sprayed thermal barrier coatings10.1016/j.ceramint.2016.06.063 ↗
8. Thermal stability and sintering behavior of plasma sprayed nanostructured 7YSZ, 15YSZ and 5.5SYSZ coatings at elevated temperatures10.1016/j.ceramint.2016.05.203 ↗
9. Engineered thermal barrier coatings deposited by suspension plasma spray10.1016/j.matlet.2017.08.096 ↗
10. Recent developments in the field of thermal barrier coatings10.1007/s11666-009-9312-7 ↗
11. Thermal stability of double-ceramic-layer thermal barrier coatings with various coating thickness10.1016/j.msea.2006.04.075 ↗
12. Multilayer, multimaterial thermal barrier coating systems: design, synthesis, and performance assessment10.1111/jace.13563 ↗
13. Thermal and mechanical properties of nano-YSZ-Alumina functionally graded coatings deposited by nano-agglomerated powder plasma spraying10.1016/j.ceramint.2014.05.068 ↗
14. Characterization of thermal barrier coatings with a gradient in porosity10.1016/j.surfcoat.2004.07.094 ↗
15. Ghosh · 2009
16. Effect of TiC self-healing coatings on the cyclic oxidation resistance and lifetime of thermal barrier coatings10.1016/j.jallcom.2015.07.271 ↗
17. Synthesis, characterization and formation mechanism of SiC/spinel nanocomposite10.1016/j.jallcom.2014.02.047 ↗
18. Thermal cycling and reactivity of a MoSi2/ZrO2 composite designed for self-healing thermal barrier coatings10.1016/j.matdes.2016.01.054 ↗
19. On the use of B-alloyed MoSi2 particles as crack healing agents in yttria stabilized zirconia thermal barrier coatings10.1016/j.jeurceramsoc.2015.08.035 ↗
20. Enhancement of high temperature oxidation resistance and spallation resistance of SiC-self-healing thermal barrier coatings10.1016/j.surfcoat.2015.12.054 ↗
21. Aqueous suspension processing of multicomponent submicronic Y-TZP/Al2O3/SiC particles for suspension plasma spraying
22. Effective parameters in axial injection suspension plasma spray process of alumina-zirconia ceramics10.1007/s11666-008-9259-0 ↗
23. Alumina-zirconia coatings obtained by suspension plasma spraying from highly concentrated aqueous suspensions10.1016/j.surfcoat.2016.09.060 ↗
24. Structural applications of ZrO2 bearing materials
25. Aqueous colloidal processing of submicrometric SiC plus Y3Al5O12 with diamond nanoparticles10.1016/j.jeurceramsoc.2013.04.016 ↗
26. Bioactive glass suspensions preparation for suspension plasma spraying10.1016/j.jeurceramsoc.2016.06.011 ↗
27. Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates10.1016/j.surfcoat.2011.07.039 ↗
28. Effect of particle size distribution of suspension feedstock on the microstructure and mechanical properties of suspension plasma spraying YSZ coatings10.1016/j.surfcoat.2014.08.063 ↗
29. Cullity · 2001
30. Study of colloidal behaviour and rheology of Al2O3-TiO2 nanosuspensions to obtain free-flowing spray-dried granules for atmospheric plasma spraying10.1016/j.ceramint.2013.03.083 ↗
31. TURBISCAN MA 2000: multiple light scattering measurement for concentrated emulsion and suspension instability analysis10.1016/S0039-9140(99)00129-0 ↗
32. Parameters controlling liquid plasma spraying: solutions, sols, or suspensions10.1007/s11666-007-9152-2 ↗
33. The key process parameters influencing formation of columnar microstructure in suspension plasma sprayed zirconia coatings10.1016/j.surfcoat.2014.08.078 ↗
34. Sintering of fine particles in suspension plasma sprayed coatings10.3390/ma3073845 ↗
35. Preliminary study on suspension plasma sprayed ZrO2+8wt% Y2O3 coatings10.1016/j.jeurceramsoc.2011.05.014 ↗
36. Microstructure and mechanical properties of plasma spraying coatings from YSZ feedstocks comprising nano- and submicron-sized particles10.1016/j.ceramint.2014.11.106 ↗
37. Deposition of silicon carbide and nitride-based coatings by atmospheric plasma spraying10.1111/j.1744-7402.2011.02748.x ↗
38. Oxidation of SiC powders in SiC/alumina/zirconia compacts10.1016/S0272-8842(99)00102-9 ↗