journal article·2016-10

Effects of sintering on the mechanical and ionic properties of ceria-doped scandia stabilized zirconia ceramic

S. Ramesh, C.K. Ng, C.Y. Tan, W.H. Wong, C.Y. Ching, A. Muchtar, M.R. Somalu, S. Ramesh, Hari Chandran, P. Devaraj

Ceramics International· Volume 42· Issue 13
Publisher page

Abstract

Abstract The effect of conventional sintering from 1300 to 1550 °C on the properties of 1 mol% ceria-doped scandia stabilized zirconia was investigated. In addition, the influence of rapid sintering via microwave technique at low temperature regimes of 1300 °C and 1350 °C for 15 min on the properties of this zirconia was evaluated. It was found that both sintering methods yielded highly dense samples with minimum relative density of 97.5%. Phase analysis by X-ray diffraction revealed the presences of only cubic phase in all sintered samples. All sintered pellets possessed high Vickers hardness (13–14.6 GPa) and fracture toughness (~3 MPam 1/2 ). Microstructural examination by using the scanning electron microscope revealed that the grain size varied from 2.9 to 9.8 µm for the conventional-sintered samples. In comparison, the grain size of the microwave-sintered zirconia was maintained below 2 µm. Electrochemical Impedance Spectroscopy study showed that both the bulk and grain boundary resistivity of the zirconia decreases with increasing test temperature regardless of sintering methods. However, the grain boundary resistivity of the microwave-sintered samples was higher than the conventional-sintered ceramic at 600 °C and reduced significantly at 800 °C thus resulting in the enhancement of electrical conduction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Nuclear materials and radiation effects · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
2. Barsoukov · 2005
3. New chemical systems for solid oxide fuel cell10.1021/cm902687z ↗
4. Solid oxide electrolyte fuel cell review10.1016/0272-8842(95)00101-8 ↗
5. Advances in solid oxide fuel cell technology10.1016/S0167-2738(00)00452-5 ↗
6. Degradation of the electrical conductivity in stabilised zirconia system: Part II: scandia-stabilized zirconia10.1016/j.ssi.2004.07.039 ↗
7. Physical and electrochemical characterization of Bi2O3-doped scandia stabilized zirconia10.1016/j.jpowsour.2007.10.074 ↗
8. Effect of Bi2O3 additives in Sc stabilized zirconia electrolyte on a stability of crystal phase and electrolyte properties10.1016/S0167-2738(02)00912-8 ↗
9. Bismuth oxide doped scandia-stabilized zirconia electrolyte for the intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2006.02.007 ↗
10. Temperature dependence of ionic conductivity in (1−x) ZrO2−(x-y)Sc2O3−yYb2O3 electrolyte material10.1016/S0167-2738(96)00435-3 ↗
11. Characterization of ZrO2 co-doped with Sc2O3 and CeO2 electrolyte for the application of intermediate temperature SOFCs10.1016/j.ssi.2004.07.013 ↗
12. Microwave sintering of ceramics, composites and metallic materials, and melting of glasses10.1080/0371750X.2006.11012292 ↗
13. Microwave processing of ceramic materials
14. West · 2007
15. S. Lefeuvre, E. Federova, O. Gomonova, J. Tao, Microwave Sintering of Micro-and Nano-Sized Alumina Powder, 12th Seminar Computing Modelling in Microwave Engineering & Applications, Grenoble, France, 2010, pp. 46–50.
16. A comparative study of conventional sintering with microwave sintering of hydroxyapatite synthesized by chemical route
17. The effect of conformation method and sintering technique on the densification and grain growth of nanocrystalline 8mol% Yttria-Stabilized Zirconia10.1111/j.1551-2916.2009.02959.x ↗
18. Comparative evaluation of spark plasma (SPS), microwave (MWS), two stage sintering (TSS) and conventional sintering (CRH) on the densification and micro structural evolution of fully stabilized zirconia ceramics10.2298/SOS1003259R ↗
19. ASTM Standard C1259–2008e1, Standard test method for dynamic young’s modulus, shear modulus, and poisson’s ratio for advanced ceramics by impulse excitation of vibration, ASTM International, West Conshoshocken, PA, 2008
20. Processing and Characterization of Sc2O3-CeO2-ZrO2 Electrolyte Based Intermediate Temperature Solid Oxide Fuel Cells
21. Sintering, phase composition and ionic conductivity of zirconia–scandia–ceria10.1016/j.jpowsour.2013.01.140 ↗
22. Phase stability and sintering behavior of 10 mol% Sc2O3–1mol% CeO2–ZrO2 ceramics10.1115/1.2971126 ↗
23. Irvine · 2013
24. A guide to the calculation of theoretical densities of crystal structures for solid oxide fuel cells
25. O.L. Kyrpa, On the temperature dependence of oxygen ionic conductivity of 10Sc1CeSZ electrolytes, The National Academy of Sciences of Ukraine, 2013.
26. Mechanical properties of 10 mol% Sc2O3–1mol% CeO2–89 mol% ZrO2 ceramics10.1016/j.jpowsour.2009.11.016 ↗
27. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
28. Lvovich · 2012
29. Investigation of scandia–yttria–zirconia system as an electrolyte material for intermediate temperature fuel cells—influence of yttria content in system (Y2O3)x (Sc2O3)(11− x)(ZrO2)8910.1016/j.ssi.2004.02.007 ↗
30. Electrical properties of bulk and grain boundaries of scandia-stabilized zirconia co-doped with yttria and ceria10.1016/j.ssi.2010.06.013 ↗
31. Studies on ionic conductivity of stabilized zirconia ceramics (8YSZ) densified through conventional and non-conventional sintering methodologies10.1016/j.ceramint.2011.05.151 ↗