Electrical properties and microstructure of Y-doped BaTiO3 ceramics prepared by high-energy ball-milling
Source abstract
Abstract
The effects of corn-starch content and high-energy ball-milling time on the microstructure and electrical properties of porous Y-doped (Ba, Sr)TiO3 samples were investigated. All the (Ba, Sr)TiO3 samples at room temperature crystallized in the tetragonal structure and the crystal structure was independent of the corn-starch content and ball-milling time. We found that the corn-starch additive and the ball-milling time affected the microstructure and the electrical properties. The (Ba, Sr)TiO3 samples exhibited a large PTCR jump (>105) due to the high porosity. The PTCR jump of the samples increased with increasing corn-starch content, while it decreased with increasing ball-milling time. In addition, the resistivity increased with increasing corn-starch content, while it decreased with increasing ball-milling time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Positive temperature coefficient resistivity in Ba1−xSrxPb1+yO3−δ ceramics10.1111/j.1151-2916.1993.tb08332.x ↗
2. Sintering and dielectric properties of BaTiO3-Ni composite ceramics10.2109/jcersj.100.555 ↗
3. Semiconducting barium titanate ceramics prepared by boron-containing liquid-phase sintering10.1111/j.1151-2916.1994.tb05372.x ↗
4. Influence of potassium on preparation and performance of PTC resistors10.1111/j.1151-2916.1993.tb07784.x ↗
5. Effect of sintering aids on microstructures and PTCR characteristic of (Sr0.2Ba0.8)TiO3 ceramics10.1111/j.1151-2916.1993.tb05302.x ↗
6. Characterization of the firing schedule for positive temperature coefficient of resistance BaTiO310.1111/j.1151-2916.1995.tb07976.x ↗
7. Semiconducting bodies in the family of barium titanates10.1111/j.1151-2916.1961.tb15350.x ↗
8. Semiconducting barium titanate10.1007/BF00550094 ↗
9. Some aspects of semiconducting barium titanate10.1016/0038-1101(64)90068-1 ↗
10. The PTC effect of barium titanate
11. Resistivity anomaly in doped barium titanate10.1111/j.1151-2916.1964.tb13795.x ↗
12. Effect of microstructure on the PTCR effect in semiconducting barium titanate ceramics10.1111/j.1151-2916.1981.tb15861.x ↗
13. Influence of stoichiometry on the PTCR effect in porous barium titanate ceramics10.1111/j.1151-2916.1981.tb15902.x ↗
14. Preparation of porous BaTiO3 PTC thermistors by adding graphite porosifiers10.1111/j.1151-2916.1994.tb07111.x ↗
15. Composite PTCR thermistors utilizing conducting borides, silicides, and carbide powders10.1007/BF00576045 ↗
16. PTCR characteristics in porous (Ba,Sr)TiO3 ceramics produced by adding partially oxidized Ti powders10.1016/S0921-5107(00)00496-7 ↗
17. Microstructure and electrical properties of porous (Ba,Sr)TiO3 ceramics10.1016/S0921-5107(01)00911-4 ↗
18. Characteristics of porous BaTiO3-based PTC thermistors fabricated by adding graphite powders10.1016/j.mseb.2003.10.003 ↗
19. Capacitance-vs-voltage characteristics of ZnO varistors10.1063/1.326411 ↗
20. Influence of reoxidation on PTC effect of porous BaTiO310.2109/jcersj.98.879 ↗
21. Determination of the potential barrier height in barium titanate ceramics10.1016/0038-1101(84)90064-9 ↗
22. Naka · 1986