A model of splats deposition state and wear resistance of WC-10Co4Cr coating
Source abstract
Abstract
Abstract In this research both low temperature high velocity oxygen-fuel flame (LT-HVOF) and high velocity oxygen-fuel flame (HVOF) techniques were employed to prepare WC-10Co4Cr splats and coatings. In situ cutting of WC-10Co-4Cr splats was carried out with focused ion beam (FIB), and a model was proposed to describe how the wear resistance of WC-10Co4Cr coatings was correlated with its residual stress state and the splats deposition state. It was observed that in LT-HVOF spraying process, WC-10Co4Cr splats were slightly melted showing "hill" shape, while in HVOF spraying process, the splats were half melted having the appearance of "concavity". The residual stress of WC-10Co4Cr coatings is determined by the size, melting state, flight speed and temperature gradient of splats. In this paper, the quantitative function formula involving heating temperature and the flight speed of the powder is put forward for the first time to predict the wear resistance of the WC-10Co4Cr coatings. This will provide a theoretical basis for engineering practice and an effective way to save costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys10.1016/j.wear.2017.07.003 ↗
2. Sliding wear behaviour of conventional and nanostructured HVOF sprayed WC-Co coatings10.1016/j.wear.2005.02.059 ↗
3. Elevated temperature wear behavior of thermally sprayed WC-Co/nanodiamond composite coatings10.1016/j.surfcoat.2017.02.048 ↗
4. Crack initiation and propagation behavior of WC particles reinforced Fe-based metal matrix composite produced by laser melting deposition10.1016/j.optlastec.2016.03.008 ↗
5. Wear behaviors of HVOF sprayed WC-12Co coatings by laser remelting under lubricated condition10.1016/j.optlastec.2016.09.043 ↗
6. Suspension HVOF spraying of reduced temperature solid oxide fuel cell electrolytes10.1007/s11666-008-9249-2 ↗
7. The effect of temperature on the dry sliding wear behavior of HVOF sprayed nanostructured WC-CoCr coatings10.1016/j.ceramint.2016.09.180 ↗
8. A comparative study on slurry and dry erosion behaviour of HVOF sprayed WC–CoCr coatings10.1016/j.wear.2013.03.028 ↗
9. Ultrasonic cavitation erosion of high-velocity oxygen-fuel (HVOF) sprayed near-nanostructured WC–10Co–4Cr coating in NaCl solution10.1016/j.ultsonch.2015.01.012 ↗
10. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrates using plasma spraying: from single splat to coating10.1016/j.surfcoat.2014.09.072 ↗
11. Solid particle erosion behaviour of plasma-sprayed conventional and nanostructured Al2O3–13wt% TiO2 ceramic coatings10.1080/0371750X.2015.1036169 ↗
12. Deposition mechanisms and oxidation behaviors of Ti-Ni coatings deposited in low-temperature HVOF spraying process10.1007/s11666-014-0117-y ↗
13. Microstructure and properties of Cu coating fabricated onto diamond-Cu substrate by low-temperature HVOF process10.1007/s11666-016-0470-0 ↗
14. Fracture toughness of normal high velocity oxygen-fuel flame and low temperature high velocity oxygen-fuel sprayed WC-10Co4Cr coating
15. Review of impact and solidification of molten thermal spray droplets10.1007/BF02658980 ↗
16. Computer simulation of plasma-sprayed coatings I. Coating deposition model10.1016/0257-8972(91)90137-L ↗
17. Modeling of particles impacting on a rigid substrate under plasma spraying conditions10.1007/BF02648527 ↗
18. Mechanical properties and thermal shock resistance of HVOF sprayed NiCrAlY coatings without and with nano ceria10.1007/s11666-012-9760-3 ↗
19. Effect of particle impact on residual stress development in HVOF sprayed coatings10.1361/105996306X146703 ↗
20. Residual stresses in HVOF-sprayed ceramic coatings10.1016/j.surfcoat.2008.04.066 ↗
21. Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings10.1016/j.msea.2008.08.023 ↗
22. On the determination of residual stress and strain fields by sharp indentation testing. Part I: theoretical and numerical analysis10.1016/S1359-6454(01)00122-7 ↗
23. On the determination of residual stress and strain fields by sharp indentation testing. Part II: experimental investigation10.1016/S1359-6454(01)00123-9 ↗
24. Correlation between residual stress and abrasive wear of WC–17Co coatings10.1016/j.ijrmhm.2014.01.009 ↗
25. Effect of residual stress on the wear resistance of thermal spray coatings10.1007/s11666-015-0309-0 ↗
26. Correlations between microstructural parameters, micromechanical properties and wear resistance of plasma sprayed ceramic coatings10.1016/S0043-1648(01)00608-1 ↗
27. Effect of carbide grain size on the sliding and abrasive wear behavior of thermally sprayed WC-Co coatings10.1080/10402009708983682 ↗