Photo-induced properties of TiO2/ZnAl layered double hydroxide coating onto porous mineral substrates
Source abstract
Abstract
Due to the actions of many environmental aspects, such as inorganic and organic pollutants as well as microorganisms, porous building materials are constantly damaged and deteriorated. Deposition of photocatalytic coating on the surface of building material is one of the most effective procedures for the protection of the material from both environmental and economic point of view. Three types of porous brick substrates and one stone material were chosen and investigated regarding chemical and mineralogical composition, textural and surface (roughness and microhardness) properties. In order to improve the porous building material surface properties the newly designed TiO2–ZnAl layer double hydroxide (TiO2–ZnAl LDH) coatings were prepared, applied and investigated. New experimental technique based on the Fourier Transform Infra-Red spectrometry in diffuse reflectance (DRIFT) modality was established and compared to existing methods (contact angle measurements without addition of water, surface water absorption and contact angle assessment after spraying with water as the function of UV/Vis irradiation time) in order to assess the photo-induced hydrophilicity of the coated materials. The DRIFT analysis confirmed the existence of the photo-induced hydrophilicity by assessing the surface OH− groups׳ quantity during UV/Vis irradiation necessary for the development of the surfaces hydrophilicity. The obtained results indicate a strong influence of the reference building material surface characteristics on the photo-induced hydrophilicity, photocatalytic and self-cleaning properties of the newly designed TiO2–ZnAl LDH coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Photocatalytic cement-based materials: comparison of nitrogen oxides and toluene removal potentials and evaluation of self-cleaning performance10.1016/j.buildenv.2011.03.004 ↗
2. Characterization of photocatalytic and superhydrophilic properties of mortars containing titanium dioxide10.1016/j.cemconres.2008.07.003 ↗
3. TiO2 optical coating layers for self-cleaning applications10.1016/j.ceramint.2007.09.043 ↗
4. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
5. Nanoparticles: health impact?10.1016/S1369-7021(04)00081-1 ↗
6. Micro-TiO2 as a starting material for new photocatalytic tiles10.1016/j.cemconcomp.2012.08.019 ↗
7. Zn–Al layered double hydroxides: synthesis, characterization and photocatalytic application10.1016/j.micromeso.2007.11.029 ↗
8. Improved photocatalytic degradation of phenolic compounds with ZnAl mixed oxides obtained from LDH materials10.1007/s11244-011-9656-3 ↗
9. A facile synthetic strategy for Mg–Al layered double hydroxide material as nanocarrier for methotrexate10.1016/j.ceramint.2011.08.014 ↗
10. Hydrotalcite synthesis via co-precipitation reactions using MgO and Al(OH)3 precursors10.1016/j.ceramint.2011.05.034 ↗
11. The synthesis of hierarchical Zn–Ti layered double hydroxide for efficient visible-light photocatalysis10.1016/j.cej.2011.01.016 ↗
12. Photocatalytic behavior of nanosized TiO2 immobilized on layered double hydroxides by delamination/restacking process10.1007/s11356-012-0780-9 ↗
13. Structural aspects of layered double hydroxides
14. Auerbach · 2004
15. Catalytic applications of layered double hydroxides and derivatives10.1016/j.clay.2011.02.007 ↗
16. Layered double hydroxides as catalyst materials: recent development10.1007/s10563-008-9061-5 ↗
17. Thermally activated iron containing layered double hydroxides as potential catalyst for N2O abatement10.1016/j.cej.2012.06.152 ↗
18. Improvement of cement-based mortars by application of photocatalytic active Ti–Zn–Al nanocomposites10.1016/j.cemconcomp.2012.07.005 ↗
19. Self-cleaning surface of clay roofing tiles
20. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
21. Relationship between photocatalytic activity, hydrophilicity and self-cleaning effect of TiO2/SiO2 films10.1016/j.surfcoat.2004.02.022 ↗
22. Liquid drops impacting superamphiphobic coatings10.1021/la401120j ↗
23. Titanium dioxide modified with transition metals and rare earth elements: phase composition, optical properties, and photocatalytic activity10.1016/j.ceramint.2012.09.027 ↗
24. Fine Ceramics, Advanced Technical Ceramics – Test Method for Air-Purification Performance of Semiconducting Photocatalytic Materials, Part 3: Removal of Toluene, International Organization for Standards, ISO 22197-3, 2011.
25. Fine Ceramics, Advanced Technical Ceramics – Test Method for Air-Purification Performance of Semiconducting Photocatalytic Materials – Part 1: Removal of Nitric Oxide, International Organization for Standards, ISO 22197-1, 2007.
26. Fine Ceramics, Advanced Technical Ceramics – Test Method for Self-Cleaning Performance of Semiconducting Photocatalytic Materials – Measurement of Water Contact Angle, International Organization for Standards, ISO 27448, 2009.
27. An overview of the methylene blue ISO test for assessing the activities of photocatalytic films10.1016/j.apcatb.2012.01.019 ↗
28. Self-cleaning and de-polluting stone surfaces: TiO2 nanoparticles for limestone10.1016/j.conbuildmat.2012.07.006 ↗
29. New insight for enhanced photocatalytic activity of TiO2 by doping carbon nanotubes: a case study on degradation of benzene and methyl orange10.1021/jp909855p ↗
30. Development of a fluorescence-based method for evaluation of self-cleaning properties of photocatalytic layers10.1016/j.cattod.2010.03.043 ↗
31. SRPS U.M8.300:1985, Determination of the Capillary Water Absorption of Building Material and Coatings, 1985.
32. Contact angle measurement and contact angle interpretation10.1016/S0001-8686(98)00087-6 ↗
33. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗