In situ pressureless sintering of SiC/MoSi2 composites
Source abstract
Abstract
Abstract SiC-reinforced MoSi2 composites have been successfully prepared by in situ pressureless sintering from elemental powders of Mo, Si and C. Meanwhile, the evolutions of the samples’ microstructure and phase at different temperatures were investigated by using X-ray diffraction (XRD) and scanning electron microscopy (SEM) with an energy dispersive X-ray spectrometer (EDS). It can be seen that at the temperature of 1100 °C, the main phases were Mo and Si, accompanying with a small amount of rich molybdenum products Mo5Si3 and Mo3Si. Then the main phases changed to MoSi2 and SiC when the sintering temperature reached 1300 °C. Finally we obtained MoSi2/SiC composites with well-dispersed SiC particles after sintering at the temperature of 1550 °C for 120 min. The evolution of porosity in these composites fits the porosity reduction model well developed by Pines and Bruck, which revealed the particle agglomeration in the composites. The flexural strength and fracture toughness of 10% SiC/MoSi2 composites were up to 274.5 MPa and 5.5 MPa m1/2, increased by approximately 40.8% and 30.6% compared with those of monolithic MoSi2, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. A comparative overview of molybdenum disilicide composites10.1016/0921-5093(92)90308-N ↗
2. Mechanical behavior of MoSi2 and MoSi2 composites10.1016/0921-5093(94)03246-7 ↗
3. Effect of La2O3 addition to modification of grain-boundary phase in MoSi210.1016/j.jallcom.2008.09.076 ↗
4. Hardness and toughness of MoSi2 and MoSi2–SiC composite prepared by reactive sintering of powders10.1016/S0921-5093(98)00517-6 ↗
5. Fabrication of MoSi2–SiC composites by a spark plasma sintering method
6. Hardness and fracture toughness of SiC particle reinforced MoSi2 composites10.1111/j.1151-2916.1991.tb06828.x ↗
7. SiC–Mo≤5Si3C≤1 composites by melt infiltration process
8. Microstructures and mechanical properties of hot-pressed MoSi2-matrix composites reinforced with SiC and ZrO2 particles10.1016/S0266-3538(00)00210-4 ↗
9. High-temperature mechanical behavior and microstructure of SiC-whisker-reinforced MoSi2 composites10.1016/S0266-3538(96)00169-8 ↗
10. Formation and reaction kinetics of Mo and Mo silicides in the preparation of MoSi2/SiC composites10.1016/S0955-2219(97)00156-8 ↗
11. Effects of carbon additions on the high temperature mechanical properties of molybdenum disilicide10.1016/0921-5093(92)90323-S ↗
12. Preparation of MoSi2/SiC composite by mechanical-assistant combustion synthesis method10.1016/j.jallcom.2009.07.121 ↗
13. Synthesis of SiCw/MoSi2 powder by the chemical oven self-propagating combustion method10.1016/j.ceramint.2005.04.022 ↗
14. One step synthesis of dense MoSi2–SiC composite by high-frequency induction heated combustion and its mechanical properties10.1016/j.jallcom.2004.10.072 ↗
15. Microwave sintering of MoSi2–SiC composites10.1016/S0921-5093(03)00140-0 ↗
16. Microstructures and densification of MoSi2–SiC composite by field-activated and pressure-assisted combustion synthesis10.1016/j.jallcom.2008.01.040 ↗
17. Synthesis nano-SiCp/MoSi2 composites by in-situ reaction sintering and low temperature oxidation behaviour10.4028/www.scientific.net/AMR.105-106.150 ↗
18. Electrical resistivity and microstructure of pressureless reactive sintered MoSi2–SiC composite10.1016/j.matchemphys.2004.01.027 ↗
19. In situ processing and properties of SiC/MoSi2 nanocomposites10.1111/j.1151-2916.1998.tb02351.x ↗
20. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
21. Pressureless sintering of particle-reinforced metal–ceramic composites for functionally graded materials: part I. Porosity reduction models10.1016/j.actamat.2005.10.060 ↗