journal article·1997-01

Qualitative Measurement of Heating Uniformity in a Multimode Microwave Cavity

S. Bradshaw, S. Delport, E. van Wyk

Publisher page

Abstract

Qualitative tests of heating uniformity in a domestic multi-mode cavity were made using thermal paper. The power distribution in the empty cavity was non-uniform. A stationary four-bladed mode stirrer modified the distribution; rotation at 5 rpm improved uniformity. A cylindrical quartz reactor and alumina-silica insulating cylinder were placed in the cavity, concentrating the field in the reactor and insulation. The field was stronger at the bottom of the empty reactor. Stainless steel sheathed thermocouples in the reactor perturbed the field slightly. When the reactor was filled with granular activated carbon the field was concentrated at the top of the reactor.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microwave-Assisted Synthesis and Applications · Gyrotron and Vacuum Electronics Research · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Borchert, R., Benolken, Haacker, A. and Willert-Porada, M., 1995. Microwave sintering of metal-ceramic functional gradient materials, Microwave and High Frequency Heating 1995, International Conference, St John’s College, Cambridge.
2. Bradshaw, S.M. and van Wyk, E.J. 1995. The Micro¬wave Regeneration of Activated Carbon, Proceed¬ings IEEE/SAIEE Antennas and Propagation and Microwave Theory and Techniques Symposium, Pretoria: 163–170.
3. Bradshaw, S.M., Van Wyk, E.J. and Siebrits, P.K., 1997. The Benefits of Microwave Regeneration of CIP Granular Activated Carbon, to be published in Proceedings of First World Congress on Microwave Processing, Florida.
4. Challa, S., Little, W.E. and Cha, C.Y., 1994. Measure¬ment of the Dielectric Properties of Char at 2.45GHz, J. Microwave Power and Electromagn. Energy: 131–137.10.1080/08327823.1994.11688241 ↗
5. Chow Ting Chan, T.V. and Reader, H.C., 1996a. Mod¬elling of modes and design of rectangular microwave oven cavities, submitted to J. Microwave Power and Electromagn. Energy.
6. Chow Ting Chan, T.V. and Reader, H.C., 1996b. Com-putational Design of a Multiple Magnetron. Cavity, IEEE/SAIEE AFRICON 96 University of Stellenbosch, Stellenbosch, South Africa.
7. De Swardt, J.B., Reader, H.C. and Chow Ting Chan, T. V., 1997. Investigation of the multimode cavity for chemical engineering purposes: University of Stellenbosch, First World Congress on Microwave Processing, Florida.
8. Dibben, D.C., and Metaxas, A.C., 1995. Time domain finite element analysis of multimode microwave applicators loaded with high and low loss materials, Microwave and High Frequency Heating 1995, In¬ternational Conference, St John’s College, Cam¬bridge.
9. Espinosa, R.J., Johnson, A.C., Thigpen, L.T., Lewis, W.A., Everleigh, C.A. and Garard, R.S., 1993. Use of variable frequency microwave power to achieve uniform results throughout large volumes for materi¬als processing, International Microwave Power In¬stitute 28th Annual symposium Proceedings: 26–31.
10. George, M., Campbell, G. and Jarvis, A., 1995. Tem¬perature variation during microwave heating: iden¬tification and quantification of contributing factors, Microwave and High Frequency Heating 1995, In¬ternational Conference, St John’s College, Cam-bridge.
11. Johnson, A.C., Espinosa, R.J., Lewis, W.A., Thigpen, L.T., Everleigh, C.A. and Garard, R.S., 1993. Use of a variable frequency microwave furnace for large-area uniform processing, Microwaves: Theory and application in materials processing II, Ceramic Trans¬actions vol., 36, (eds. D.E. Clark, W.R. Tinga and J.R. Laia), American Ceramic Society, Westerville, Ohio: 563–570.
12. Metaxas, A. C. and Meredith, R. J. 1983. Industrial Microwave Heating. Peter Pergrinus Ltd. London, UK
13. Newman, J.D., Walsh, L., Evans, R., Tholen, T., Andrade, 0.M., Iskander, M.F. and Bunch, K.J., 1993. Experi-mental validation of numerical simulations of the microwave sintering process, Microwaves: Theory and application in materials processing II, Ceramic Transactions vol., 36, (eds. D.E. Clark, W.R. Tinga and J.R. Laia), American Ceramic Society, Westerville, Ohio: 229–237.
14. Ryynanen, S and Ohlsson, T., 1995. The effect of chemical and layout modifications on the microwave heating uniformity of a ready meal, Microwave and High Frequency Heating 1995, International Confer¬ence, St John’s College, Cambridge.
15. Swain, M.J., Foster, A.M. and Phillips, I.C., 1995. Development and evaluation of an alternative micro-wave oven performance test protocol, Microwave and High Frequency Heating 1995, International Conference, St John’s College, Cambridge.
16. Van Staden, P. J., 1990. Parameters governing the per-formance of a continuous, direct resistance heating, carbon regeneration furnace, M.Sc. Eng. thesis, Uni-versity of the Witwatersrand.
17. Van Wyk, E.J., Bradshaw, S.M. and de Swardt, J.B., 1996. The dependence on time and temperature of microwave regeneration of activated carbon, Sub¬mitted to Int. J. Min. Proc.