Influence of doped platinum nanoparticles on photocatalytic performance of CuO–SiO2 for degradation of Acridine orange dye

Abstract Preparation of cupric oxide-silicon dioxide nanoparticles was carried out using a sol-gel method. Cupric oxide-silicon dioxide nanoparticles were decorated by different weight percent of platinum (0.5, 1.0, 3.0 and 5.0 wt %) using method of photoassisted deposition. XRD remarks revealed that XRD patterns for all samples are composed of cupric oxide. Therefore, silicon dioxide is amorphous and decoration of cupric oxide-silicon dioxide nanoparticles by platinum has no effect on the formed phase. Also, due to low percent of platinum there are no peaks for platinum oxide or platinum. Cupric oxide has bandgap energy absorb in visible region but has high e-h recombination rate. Decoration of cupric oxide-silicon dioxide nanoparticles by platinum was decreased bandgap energy from 2.38 to 1.91 eV and also decrease rate of e-h recombination rate. The photocatalytic activity of platinum decorated cupric oxide-silicon dioxide nanoparticles was measured under visible light for Acridine orange dye degradation. 100% of Acridine orange dye can be degraded using 3.0 wt % of platinum decorated cupric oxide-silicon dioxide photocatalyst, 1.2 g/L dose of platinum decorated cupric oxide-silicon dioxide photocatalyst and 30 min reaction time. 3.0 wt % of platinum decorated cupric oxide-silicon dioxide photocatalyst has photocatalytic stability for five times.