Structural evolution of Al-modified PS-PVD 7YSZ TBCs in thermal cycling
Source abstract
Abstract
Abstract Feather-like columnar 7YSZ thermal barrier coatings (TBCs) were prepared by plasma spray-physical vapor deposition (PS-PVD). In order to improve the thermal cycle performance of TBCs, Al-modification was carried out with the as-sprayed TBCs. Al film was deposited on the surface of TBCs. Subsequently, the Al-deposited TBCs were conducted with vacuum heat treatment. After that, a dense overlay consisting of α-Al2O3, Al3Zr phases was generated on the TBCs surface due to the reactions of Al and O2, Al and ZrO2. The Al-modified TBCs show a better thermal cycle performance than the as-sprayed TBCs because of the overlay generation. Moreover, the structural evolution of overlay was investigated emphatically before and after thermal cycle testing, showing good phase stability. No crack and spallation were observed in the Al-modified TBCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Ceramic top coats of plasma-sprayed thermal barrier coatings: materials, processes, and properties10.1007/s11666-017-0597-7 ↗
2. Current status of thermal barrier coatings-an overview10.1016/0257-8972(87)90003-X ↗
3. Microstructure and thermal properties of RETaO4 (RE = Nd, Eu, Gd, Dy, Er, Yb, Lu) as promising thermal barrier coating materials10.1016/j.scriptamat.2016.08.019 ↗
4. Plasma spray: study of the coating generation10.1016/0272-8842(95)00106-9 ↗
5. Thermal properties and phase stability of yttria-stabilized zirconia (YSZ) coating deposited by air plasma spray on to a Ni-base superalloy10.1016/j.ceramint.2017.11.109 ↗
6. Review on advanced EB-PVD ceramic Topcoats for TBC applications10.1111/j.1744-7402.2004.tb00182.x ↗
7. Evaporation rate and composition monitoring of electron beam physical vapor deposition processes10.1016/0257-8972(96)80006-5 ↗
8. Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process10.1016/j.apsusc.2017.09.218 ↗
9. 7YSZ coating prepared by PS-PVD based on heterogeneous nucleation10.1016/j.cja.2017.07.007 ↗
10. Gas-deposition mechanisms of 7YSZ coating based on plasma spray-physical vapor deposition10.1016/j.jeurceramsoc.2015.10.041 ↗
11. Stage growth of columnar 7YSZ coating prepared by plasma spray-physical vapor deposition10.1016/j.vacuum.2017.08.025 ↗
12. Improved thermal cycling durability of thermal barrier coating manufactured by PS-PVD10.1007/s11666-013-9971-2 ↗
13. Mechanisms governing the thermal shock and tensile fracture of PS-PVD 7YSZ TBC10.1016/j.ceramint.2017.11.190 ↗
14. In situ fabrication of (α-Al2O3+ Al3Zr)/Al composites in an Al–ZrO2 system10.1016/j.compscitech.2010.08.021 ↗
15. The reaction mechanism and mechanical properties of the composites fabricated in an Al–ZrO2–C system10.1016/j.msea.2010.07.001 ↗
16. Dry sliding wear behavior of Al-based composites fabricated by exothermic dispersion reaction in an Al–ZrO2–C system10.1016/j.wear.2010.02.023 ↗
17. Enhanced properties of Al-modified EB-PVD 7YSZ thermal barrier coatings10.1016/j.ceramint.2016.05.210 ↗
18. Research of in situ modified PS-PVD thermal barrier coating against CMAS (CaO–MgO–Al2O3–SiO2) corrosion10.1016/j.ceramint.2015.10.106 ↗