Conditions for fabricating single-phase (Ta, Zr)C carbide by SHS from mechanically activated reaction mixtures
Source abstract
Abstract
Abstract The process parameters for the fabrication of binary carbide (Ta, Zr)C using MA–SHS were optimized. After MA processing in air, the SHS product was the virtually single-phase binary carbide (Ta, Zr)C with a ZrO2 content less than 3%. Activation of the exothermic mixture in argon or under vacuum did not give rise to the single-phase product because the TaC and ZrC phases were present in addition to (Ta, Zr)C. Introduction of excess carbon, an increase in the combustion and post-reaction temperatures, and an increase in the duration of thermal relaxation using a “chemical oven” yielded the single-phase (Ta, Zr)C solid solution with lattice parameter a=0.4493 nm, which corresponds to 17.5 at% of dissolved ZrC. Dense samples were fabricated from submicron-sized carbide powder via hot pressing and spark plasma sintering; their properties were studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. H. Hollek, Dvojnyj i trojnye karbidnye i nitridnye sistemy perekhodnyh metallov: Sprav. izd./Per. s nem. pod red. Levinskogo Yu.V (Handbook on binary and ternary carbide and nitride compounds of transitional metals. Translation from German, ed. Levinsky YU.) Moscow: Metallurgiya, 1996, p. 319.
2. Diffusion and solid solution formation between the binary carbides of TaC, HfC and ZrC10.1016/j.ijrmhm.2013.03.009 ↗
3. Pierson · 1996 · 8
4. Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15vol% TaSi2 or MoSi210.1557/jmr.2009.0232 ↗
5. Sintering mechanisms of zirconium and hafnium carbides doped with MoSi210.1111/j.1551-2916.2009.03049.x ↗
6. Processing of ZrC–Mo cermets for high temperature applications. Part II: pressureless sintering and mechanical properties10.1111/j.1551-2916.2007.02231.x ↗
7. Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M=V, Nb, and Ta) additions10.1016/j.jeurceramsoc.2011.10.045 ↗
8. Vallance · 2008
9. Investigation on decomposition mechanism of tantalum ethylate precursor during formation of TaC on C/C composite material10.1016/j.matlet.2006.03.023 ↗
10. ZrC ablation protective coating for carbon/carbon composites10.1016/j.carbon.2009.07.047 ↗
11. The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame10.1016/j.corsci.2010.09.028 ↗
12. The O–Ta (Oxygen-Tantalum) system10.1007/BF02648373 ↗
13. Microstructure and ablation resistance of ZrC nanostructured coating for carbon/carbon composites10.1016/j.matlet.2013.05.124 ↗
14. Oxidation of ZrC–30vol% SiC composite in air from low to ultrahigh temperature10.1016/j.jeurceramsoc.2011.10.024 ↗
15. Ultra-high temperature oxidation of a hafnium carbide-based solid solution ceramic composite10.1016/j.corsci.2013.11.049 ↗
16. Oxidation mechanisms of hafnium carbide and hafnium diboride in the temperature range 1400 to 2100°C
17. Oxidation study of Ta–Zr coatings10.1016/j.tsf.2012.03.088 ↗
18. Production of ultra-high temperature carbide (Ta, Zr)C by self-propagating high-temperature synthesis of mechanically activated mixtures10.1016/j.ceramint.2015.03.146 ↗
19. Combustion synthesis and nanomaterials10.1016/j.cossms.2008.12.002 ↗
20. Evstigneev · 1996
21. Lyahov · 2008 · 168
22. Merzhanov · 2003 · 368
23. Ermilov · 2012 · 110
24. SHS of Ti3SiC2: ignition temperature depression by mechanical activation10.1016/j.jeurceramsoc.2004.11.021 ↗
25. Mechanical activation assisted self-propagating high-temperature synthesis of ZrC and ZrB2 in air from Zr/B/C powder mixtures10.1016/S0955-2219(03)00120-1 ↗
26. Samsonov · 1975 · 192
27. Oxidation study of Ta–Zr coatings10.1016/j.tsf.2012.03.088 ↗
28. Ultra-high temperature ceramics: densification, properties and thermal stability
29. Rogachev · 2014 · 429
30. Osobennosti goreniya sistemy Ti–C–B (Cumbustion features in Ti–C–B system)
31. Solute diffusion in α-Zr: Rutherford backscattering and secondary-ion mass spectrometry study10.1080/01418619108213926 ↗
32. Emeleus · 1966
33. Nizkotemperaturnyi sintez nanodispersnykh karbidov tantala, tsirkoniya i gafniya (low-temperature synthesis of nano-dispersed carbides of tantalum, zirconium and hafnium)
34. Modern methods for investigating functional surfaces of advanced materials by mechanical contact testing10.1134/S1063774507060065 ↗