Effect of Sr and Ca dopants on oxidation and electrical properties of lanthanum chromite-coated AISI 430 stainless steel for solid oxide fuel cell interconnect application
Source abstract
Abstract
Abstract Lanthanum chromite coating occupies a noticeable position as a ceramic coating on metallic interconnects in solid oxide fuel cells because of its excellent electrical conductivity, high oxidation resistance and desirable chemical stability in both oxidizing and reducing atmospheres. In the present work, a sol–gel process based on the dip-coating technique was used to prepare dense and uniform coatings on metallic alloy for interconnect application (AISI 430 type). The effect of strontium and calcium doping into lanthanum chromite structure on electrical conductivity and oxidation behavior of the coated sample has been investigated. The oxidation behavior was evaluated by cyclic oxidation test at 800 °C in lab air. In addition, the area specific resistance (ASR) of the coated and uncoated samples after long-term oxidation was measured through a two-point, four-wire probe method. It was found that, for the coated sample, when compared to the bare metallic one, the addition of Ca into lanthanum chromite coating drastically lowered the oxidation rate and electrical resistance by approximately 2 and 6 times, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Nguyen · 1995
2. Effects of calcination on microscopic and mesoscopic structures in Ca- and Sr-doped nano-crystalline lanthanum chromites10.1016/j.jssc.2010.11.006 ↗
3. Fergus · 2009
4. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
5. Materials for fuel-cell technologies10.1038/35104620 ↗
6. O′Hayre · 2009
7. Yang · 2009 · 63
8. High-temperature solid oxide fuel cells: fundamentals, design and applications, Materials Today 5 2002 55.10.1016/S1369-7021(02)01241-5 ↗
9. LaCrO3-based coatings on ferritic stainless steel for solid oxide fuel cell interconnect applications10.1016/j.surfcoat.2003.05.003 ↗
10. Lanthanum oxide-coated stainless steel for bipolar plates in solid oxide fuel cells (SOFCs)10.1016/j.jpowsour.2007.12.053 ↗
11. Improved oxidation resistance of a nanocrystalline chromite-coated ferritic stainless steel10.1016/j.jpowsour.2007.11.105 ↗
12. Applicability of heat resisting alloys to the separator of planar type solid oxide fuel cell10.1016/0167-2738(93)90310-Y ↗
13. Application of Fe–16Cr ferritic alloy to interconnector for a solid oxide fuel cell10.1016/S0167-2738(01)00863-3 ↗
14. Effects of lanthanum-based perovskite coatings on the formation of oxide scale for ferritic SOFC interconnect10.1016/j.matchemphys.2010.12.004 ↗
15. LaCrO3-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material10.1016/j.jpowsour.2010.01.023 ↗
16. Consumptive coating layer synthesis by a sol–gel technique on a stainless steel substrate for an IT-SOFC separator
17. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
18. Z. Lu, Electrically Conductive Spinel and Perovskite Phases for Solid Oxide Fuel Cell Interconnect Application, Doctor of Philosophy, Tennessee Technological University, 2005.
19. Characterization of iron-based alloy interconnects for reduced temperature solid oxide fuel cells10.1016/S0167-2738(99)00329-X ↗
20. Samsonov · 1982
21. Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance10.1016/S0025-5408(03)00076-X ↗
22. A fundamental study of chromium deposition on solid oxide fuel cell cathode materials10.1016/j.jpowsour.2006.02.017 ↗
23. Advances, aging mechanisms and lifetime in solid-oxide fuel cells10.1016/j.jpowsour.2003.09.025 ↗
24. Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications10.1016/j.jpowsour.2003.09.024 ↗
25. Fabrication and high-temperature corrosion of sol–gel Mn/Co oxide spinel coating on AISI 43010.1016/j.surfcoat.2013.02.041 ↗
26. Sol–gel derived (La0.8M0.2)CrO3 (M=Ca, Sr) coating layer on stainless-steel substrate for use as a separator in intermediate-temperature solid oxide fuel cell10.1016/j.jpowsour.2005.12.030 ↗
27. Effect of various lanthanum sol–gel coatings on the 330Cb (Fe–35Ni–18Cr–1Nb–2Si) oxidation at 900°C10.1016/j.apsusc.2011.07.079 ↗
28. L.F.G. Setz, I. Santacruz, M.T. Colomer, S.R.H. Mello-Castanho, R. Moreno, Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC, Materials Research Bulletin 46 983–986.10.1016/j.materresbull.2011.03.019 ↗
29. Compatibility of perovskite contact layers between cathode and metallic interconnector plates of SOFCs10.1016/S0167-2738(96)00425-0 ↗
30. Plasma spraying of lanthanum chromite films for solid oxide fuel cell interconnection application10.1111/j.1151-2916.1997.tb02871.x ↗
31. Preparation of La(Sr)CrO3−δ thin film interconnector by high deposition rate laser ablation method10.1016/0167-2738(95)00200-P ↗
32. Metallic interconnects for SOFC: characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys10.1016/j.jpowsour.2007.06.255 ↗
33. Opportunity of metallic interconnects for ITSOFC: Reactivity and electrical property10.1016/j.jpowsour.2005.08.039 ↗
34. Spinel and perovskite protection layers between crofer22APU and La0.8Sr0.2FeO3 cathode materials for SOFC interconnects10.1149/1.3025914 ↗
35. (Mn,Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications10.1016/j.ijhydene.2006.08.048 ↗
36. Oxidation behavior of an La-coated chromia-forming alloy and the electrical property of oxide scales10.1016/S0257-8972(00)00724-6 ↗
37. Nano-structured self-assembled LaCrO3 thin film deposited by RF-magnetron sputtering on a stainless steel interconnect material10.1016/j.compositesb.2003.08.004 ↗
38. Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings10.1016/S0025-5408(01)00506-2 ↗
39. Sol–gel coatings to reduce oxide growth in interconnects used for solid oxide fuel cells10.1016/j.jpowsour.2004.06.063 ↗
40. Pre-treatment and oxidation behavior of sol–gel Co coating on 430 steel in 750°C air with thermal cycling10.1016/j.surfcoat.2012.02.023 ↗
41. B. Hua, Y. Kong, F. Lu, J. Zhang, J. Pu, J. Li, The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect, Chinese Science Bulletin 55 3831–3837.10.1007/s11434-010-3161-0 ↗
42. Sintering behavior of Ca- or Sr-doped LaCrO3 perovskites including second phase of AECrO4 (AE=Sr, Ca) in air10.1016/S0167-2738(00)00372-6 ↗
43. Electrical conductivity and performance of doped LaCrO3 perovskite oxides for solid oxide fuel cells10.1016/j.jpowsour.2007.10.053 ↗