journal article·2012-07

SiC whisker reinforced multi-carbides composites prepared from B4C and pyrolyzed rice husks via reactive infiltration

Hongyan Wu, Mingxia Gao, Dan Zhu, Shengcai Zhang, Yi Pan, Hongge Pan, Yongfeng Liu, Filipe J. Oliveira, Joaquim M. Vieira

Ceramics International· Volume 38· Issue 5
Publisher page

Abstract

Abstract SiC whisker reinfored carbide-based composites were fabricated by a reactive infiltration method by using Si as the infiltrate. Rice husks (RHs) were pyrolyzed to SiC whiskers, particles and amorphous carbon, and were then mixed with different contents of B4C as well as Mo powders. The mixtures were molded to porous preforms for the infiltration. The SiC whiskers and particles in the preform remained in the composite. Molten Si reacted with the amorphous carbon, B4C as well as Mo in the preform during the infiltration, forming newly SiC, B12(C,Si,B)3 as well as MoSi2. The upper values of elastic modulus, hardness and fracture toughness of the composites are 297.8 GPa, 16.8 ± 0.8 GPa, and 3.8 ± 0.2 MPa m1/2, respectively. The influence of the phase composition of the composites on the mechanical properties and the fracture mechanism are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Microstructure and mechanical properties of SiCp/SiC and SiCw/SiC composites by CVI10.1007/s10853-009-3953-2 ↗
2. Synthesis and characterization of Si/SiC ceramics prepared using cotton fabric10.1016/j.ceramint.2008.04.014 ↗
3. Reaction-formed silicon carbide10.1016/0921-5093(91)90210-E ↗
4. Synthesis of SiC ceramics from processed cellulosic bio-precursor10.1016/j.ceramint.2009.09.006 ↗
5. Microstructural evolution in reaction-bonded silicon carbide10.1007/BF00553278 ↗
6. TiAl/B4C marine material—fabrication, mechanical and corrosion properties10.1016/j.ceramint.2010.10.019 ↗
7. Erosion behaviour of B4C-based ceramic composites10.1016/j.ceramint.2009.12.024 ↗
8. Microstructural evolution during the infiltration of boron carbide with molten silicon10.1016/j.jeurceramsoc.2009.09.021 ↗
9. The morphology of ceramic phases in BxC–SiC–Si infiltrated composites10.1016/j.jssc.2006.01.031 ↗
10. The effect of Fe addition on processing and mechanical properties of reaction infiltrated boron carbide-based composites10.1007/s10853-006-1304-0 ↗
11. Processing and characterization of B4C–SiC–Si–TiB2 composites10.1016/j.msea.2010.03.020 ↗
12. Development of multi-phase B–Si–C ceramic composite by reaction sintering10.1016/j.ceramint.2008.07.015 ↗
13. Pressureless sintering and properties of αSiC–B4C composite10.1016/S0955-2219(00)00244-2 ↗
14. Microstructure of (SiC, TiB2)/B4C composites by reaction hot pressing10.1016/j.ceramint.2005.05.022 ↗
15. Microstructure–property relationship in B4C–βSiC materials10.1016/S0167-2738(97)00378-0 ↗
16. Single-crystal SiC nanowires with a thin carbon coating for stronger and tougher ceramic composites10.1002/adma.200500104 ↗
17. Fabrication in situ SiC nanowires/SiC matrix composite by chemical vapour infiltration process10.1016/j.matlet.2004.05.059 ↗
18. Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites10.1016/j.matchemphys.2009.02.039 ↗
19. Effect of catalyst and process parameters on the production of silicon carbide from rice hulls10.1016/S0272-8842(97)00077-1 ↗
20. Effect of acid treatment on the formation of SiC whiskers from raw rice husks10.1016/0955-2219(95)00097-6 ↗
21. Silicon-based materials from rice husks and their applications10.1021/ie010284b ↗
22. Production of β-SiC by pyrolysis of rice husk in gas furnaces10.1016/j.ceramint.2005.07.018 ↗
23. Characteristics of rice husks for chlorination reaction10.1016/S0167-577X(00)00047-1 ↗
24. Formation of silicon carbide from rice hulls
25. Evaluation of KIc of brittle solids by the indentation method with low crack to indent ratios10.1007/BF00724706 ↗
26. Evans · 1979 · 112
27. Intermetallic-matrix—a review10.1016/0966-9795(95)00037-2 ↗
28. The effects of microstructure on the mechanical properties of A12O3–NiAl composites10.1016/S0254-0584(98)00168-0 ↗