Effects of discrete and simultaneous addition of SiC and Si3N4 on microstructural development of TiB2 ceramics
Source abstract
Abstract
Abstract The impact of Si3N4 and SiC additives incorporation in the microstructure and sintering behavior of TiB2-based composites were studied. Three ceramic composites including TiB2–Si3N4, TiB2–SiC, and TiB2–SiC–Si3N4 were manufactured by spark plasma sintering (SPS) at 1950 °C for 8 min under 35 MPa. The acquired ceramics were analyzed by X-ray diffractometry and scanning electron microscopy. In addition, the sintering thermodynamic was investigated using the HSC Chemistry package. X-ray diffraction patterns of the prepared ceramics revealed the in-situ formation of graphite and boron nitride in the final composites initiated from SiC and Si3N4, respectively. The thermodynamic assessments proved the role of liquid phase sintering on the sinterability enhancement of all composite samples. Field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy verified the in-situ formation of both BN and graphite components in the sample containing SiC and Si3N4 additives. Finally, the fractographical investigations clarified the transgranular breakage as the main fracture mode in the TiB2-based ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. In-vitro electrochemical study of TiB/TiB2 composite coating on titanium in Ringer's solution10.1016/j.jallcom.2018.06.312 ↗
2. Fretting wear behavior of TiB2-based materials against bearing steel under water and oil lubrication10.1016/S0043-1648(01)00670-6 ↗
3. Reaction sintering of NiA and TiB2-NiA1 composites under pressure10.1016/S0921-5093(98)00862-4 ↗
4. TiN–TiB2 composites prepared by various sintering techniques10.1016/j.ijrmhm.2013.07.009 ↗
5. Influence of TiB2 particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering10.1016/j.jallcom.2013.03.007 ↗
6. Densification and mechanical properties of cBN–TiN–TiB2 composites prepared by spark plasma sintering of SiO2-coated cBN powder10.1016/j.jeurceramsoc.2014.05.018 ↗
7. A review on the Comsol Multiphysics studies of heat transfer in advanced ceramics
8. A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB210.1016/j.ceramint.2019.08.112 ↗
9. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade10.1016/j.ceramint.2019.06.184 ↗
10. Thermal diffusivity and microstructure of spark plasma sintered TiB2-SiC-Ti composite10.1016/j.ceramint.2019.01.141 ↗
11. Synthesis and characterization of in-situ CNTs reinforced TiB2-based composite by CVD using Ni catalysts10.1016/j.ceramint.2017.10.149 ↗
12. A numerical approach to the heat transfer in monolithic and SiC reinforced HfB2, ZrB2 and TiB2 ceramic cutting tools10.1016/j.ceramint.2019.05.095 ↗
13. TiB2–SiC-based ceramics as alternative efficient micro heat exchangers10.1016/j.ceramint.2019.06.150 ↗
14. On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: a numerical approach10.1016/j.ceramint.2020.03.003 ↗
15. Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites10.1016/j.ceramint.2020.01.192 ↗
16. Microstructure and mechanical properties of hot pressed TiB2-SiC composite ceramic tool materials at room and elevated temperatures10.1016/j.msea.2014.03.084 ↗
17. Role of co-addition of BN and SiC on microstructure of TiB2-based composites densified by SPS method10.1016/j.ceramint.2020.07.001 ↗
18. Volume combustion synthesis of B4C–SiC nanocomposites in tubular and spark plasma furnaces10.1016/j.ceramint.2020.08.060 ↗
19. Structure and mechanical properties of TiB2/TiC–Ni composites fabricated by pulse plasma sintering method10.1016/j.apt.2018.04.015 ↗
20. Reactive spark plasma sintering of TiB 2 –SiC–TiN novel composite10.1016/j.ijrmhm.2019.02.022 ↗
21. Influence of vanadium content on the characteristics of spark plasma sintered ZrB2–SiC–V composites10.1016/j.jallcom.2019.07.117 ↗
22. Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture10.1016/j.ceramint.2018.02.195 ↗
23. Spark plasma sintering of TiAl–Ti3AlC2 composite10.1016/j.ceramint.2018.08.272 ↗
24. Microstructure–mechanical properties correlation in spark plasma sintered Ti–4.8 wt.% TiB2 composites10.1016/j.matchemphys.2018.11.057 ↗
25. Spark plasma sintering of Al-doped ZrB2–SiC composite10.1016/j.ceramint.2018.11.098 ↗
26. Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite10.1016/j.ceramint.2018.07.011 ↗
27. Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium10.1016/j.matchemphys.2017.09.069 ↗
28. Influence of TiN dopant on microstructure of TiB2 ceramic sintered by spark plasma10.1016/j.ceramint.2018.11.228 ↗
29. Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite10.1016/j.matchar.2018.08.043 ↗
30. Formation of TiB2-TiC composites by reactive sintering10.1016/S0272-8842(98)00048-0 ↗
31. Effect of ZrB2 and SiC addition on TiB2-based ceramic composites prepared by spark plasma sintering10.1016/j.ijrmhm.2014.05.019 ↗
32. Densification, microstructure and mechanical properties of TiB2-B4C based composites10.1016/S0263-4368(96)00012-1 ↗
33. Ultra-high elevated temperature strength of TiB2-based ceramics consolidated by spark plasma sintering10.1016/j.jeurceramsoc.2016.08.009 ↗
34. Effects of CNTs content on the microstructure and mechanical properties of spark plasma sintered TiB2-SiC ceramics10.1016/j.ceramint.2016.10.078 ↗
35. Oxidation of monolithic TiB2 and TiB2-20 wt.% MoSi2 composite at 850 °C10.1016/j.jeurceramsoc.2004.10.025 ↗
36. Phase transformation in spark plasma sintered ZrB2–V–C composites at different temperatures10.1016/j.ceramint.2019.12.202 ↗
37. Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition10.1016/j.ceramint.2018.04.171 ↗
38. Sintering behavior of ZrB2–SiC composites doped with Si3N4: a fractographical approach10.1016/j.ceramint.2017.04.144 ↗
39. Spark plasma sintering of TiN ceramics codoped with SiC and CNT10.1016/j.ceramint.2018.10.223 ↗
40. Fractographical characterization of hot pressed and pressureless sintered AlN-doped ZrB2–SiC composites10.1016/j.matchar.2015.10.016 ↗
41. Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
42. Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound10.1016/j.ceramint.2020.02.213 ↗
43. Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: a numerical study10.1016/j.ceramint.2020.01.195 ↗
44. Triplet carbide composites of TiC, WC, and SiC10.1016/j.ceramint.2019.12.155 ↗
45. Characterization of triplet Ti–TiB–TiC composites: comparison of in-situ formation and ex-situ addition of TiC10.1016/j.ceramint.2020.01.204 ↗
46. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide10.1016/j.ceramint.2019.11.262 ↗
47. Solid solution formation during spark plasma sintering of ZrB2–TiC–graphite composites10.1016/j.ceramint.2019.09.287 ↗
48. Hybrid Ti matrix composites with TiB2 and TiC compounds10.1016/j.mtcomm.2019.100576 ↗
49. Spark plasma sintering of TiC–SiCw ceramics10.1016/j.ceramint.2019.06.236 ↗
50. Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide10.1016/j.ceramint.2018.05.071 ↗
51. A fractographical approach to the sintering process in porous ZrB2–B4C binary composites10.1016/j.ceramint.2014.08.081 ↗
52. Influence of sintering temperature on microstructure and mechanical properties of Ti–Mo–B4C composites10.1007/s12540-019-00469-y ↗
53. Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites
54. Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC10.1016/j.ceramint.2016.07.208 ↗
55. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
56. The effect of thermal contact resistance on the temperature distribution in a WC made cutting tool10.1016/j.ceramint.2019.07.241 ↗
57. Hot pressing and oxidation behavior of ZrB2–SiC–TaC composites10.1016/j.ceramint.2019.10.093 ↗
58. Role of hot-pressing temperature on densification and microstructure of ZrB2–SiC ultrahigh temperature ceramics10.1016/j.ijrmhm.2020.105355 ↗
59. Electron microscopy study of ZrB2–SiC–AlN composites: hot-pressing vs. pressureless sintering10.1016/j.ceramint.2020.08.054 ↗
60. Nanoindentational and conventional mechanical properties of spark plasma sintered Ti–Mo alloys10.1016/j.jmrt.2020.07.066 ↗
61. A novel spark plasma sintered TiC–ZrN–C composite with enhanced flexural strength10.1016/j.ceramint.2020.08.073 ↗
62. Microstructural, mechanical and friction properties of nano-graphite and h-BN added TiC-based composites10.1016/j.ceramint.2020.08.068 ↗
63. A novel TiC-based composite co-strengthened with AlN particulates and graphene nano-platelets10.1016/j.ijrmhm.2020.105331 ↗
64. Effect of Zr and C co-addition on the characteristics of ZrB2-based ceramics: role of spark plasma sintering temperature10.1016/j.ceramint.2020.06.283 ↗
65. Enhanced fracture toughness of ZrB2–SiCw ceramics with graphene nano-platelets10.1016/j.ceramint.2020.06.275 ↗
66. Characterization of hot-pressed Ti3SiC2–SiC composites10.1016/j.ijrmhm.2020.105232 ↗
67. Advantages and disadvantages of graphite addition on the characteristics of hot-pressed ZrB2–SiC composites10.1016/j.ceramint.2019.12.086 ↗
68. Electron microscopy characterization of porous ZrB2–SiC–AlN composites prepared by pressureless sintering10.1016/j.ceramint.2020.07.011 ↗
69. A study on in-situ synthesis of TiB2–SiC ceramic composites by reactive hot pressing10.1016/j.ceramint.2013.07.152 ↗
70. Effects of SPS parameters on the densification and mechanical properties of TiB 2 -SiC composite10.1016/j.ceramint.2019.02.119 ↗
71. Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives10.1016/j.ceramint.2020.02.156 ↗
72. A novel ZrB2–C3N4 composite with improved mechanical properties10.1016/j.ceramint.2019.07.144 ↗
73. Influence of SPS temperature on the properties of TiC–SiCw composites10.1016/j.ceramint.2020.01.206 ↗
74. Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis10.1016/j.ceramint.2020.01.279 ↗
75. Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition10.1016/j.ceramint.2020.01.291 ↗
76. Effects of SiC content on thermal shock behavior and elastic modulus of cordierite–mullite composites10.1016/j.ceramint.2020.06.153 ↗
77. Effects of Sr and Mg dopants on biological and mechanical properties of SiO2–CaO–P2O5 bioactive glass10.1016/j.ceramint.2020.06.030 ↗
78. Heat transfer and flow characteristics of hybrid Al2O3/TiO2–water nanofluid in a minichannel heat sink10.1007/s00231-020-02896-9 ↗
79. Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics10.1016/j.ceramint.2019.11.027 ↗
80. Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers10.1016/j.diamond.2020.107786 ↗
81. A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics10.1016/j.ceramint.2020.03.148 ↗
82. Role of nano-WC addition on microstructural, mechanical and thermal characteristics of TiC–SiCw composites10.1016/j.ijrmhm.2020.105248 ↗
83. Beneficial role of carbon black on the properties of TiC ceramics10.1016/j.ceramint.2020.06.125 ↗
84. Characterization of ZrB2–TiC composites reinforced with short carbon fibers10.1016/j.ceramint.2020.06.095 ↗
85. Co-reinforcing of ZrB2–SiC ceramics with optimized ZrC to Cf ratio10.1016/j.ceramint.2020.06.029 ↗
86. Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites10.1016/j.ceramint.2020.05.255 ↗
87. Physical, mechanical and microstructural characterization of TiC–ZrN ceramics10.1016/j.ceramint.2020.05.292 ↗
88. Characteristics of quadruplet Ti–Mo–TiB2–TiC composites prepared by spark plasma sintering10.1016/j.ceramint.2020.05.137 ↗
89. Role of graphene nano-platelets on thermal conductivity and microstructure of TiB2–SiC ceramics10.1016/j.ceramint.2020.05.289 ↗
90. Enhanced densification of spark plasma sintered TiB2 ceramics with low content AlN additive10.1016/j.ceramint.2020.05.278 ↗
91. Microstructural and mechanical characterization of spark plasma sintered TiC ceramics with TiN additive10.1016/j.ceramint.2020.04.215 ↗
92. Role of nano-diamond addition on the characteristics of spark plasma sintered TiC ceramics10.1016/j.diamond.2020.107828 ↗
93. Influence of TiB2 content on the properties of TiC–SiCw composites10.1016/j.ceramint.2019.11.236 ↗
94. Densification behavior and microstructure development in TiB2 ceramics doped with h-BN10.1016/j.ceramint.2020.04.223 ↗
95. Effect of B4C content on sintering behavior, microstructure and mechanical properties of Ti-based composites fabricated via spark plasma sintering10.1016/j.matchemphys.2020.123087 ↗
96. Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2–SiC composite10.1016/j.ceramint.2020.04.292 ↗
97. Characterization of spark plasma sintered TiC ceramics reinforced with graphene nano-platelets10.1016/j.ceramint.2020.04.189 ↗
98. Influence of SiAlON addition on the microstructure development of hot-pressed ZrB2–SiC composites10.1016/j.ceramint.2020.04.258 ↗
99. Numerical assessment of beryllium oxide as an alternative material for micro heat exchangers10.1016/j.ceramint.2020.04.263 ↗