journal article·2020-04

Experimental investigation on high temperature wettability and structural behaviour of SAW fluxes using MgO–TiO2–SiO2 and Al2O3–MgO–SiO2 flux system

Lochan Sharma, Jagdish Kumar, Rahul Chhibber

Ceramics International· Volume 46· Issue 5
Publisher page

Abstract

Abstract To establish the relationship between wettability and structure with the change in SAW flux composition, the contact angle measurement study was performed at 1700 K. For MgO–TiO2–SiO2 and Al2O3–MgO–SiO2 flux system the wetting behaviour was studied by evaluating the contact angle as well as surface tension properties. Sessile drop method was used to determine the wetting properties of SAW fluxes. Twenty-one SAW fluxes were designed & developed by applying mixture design approach of design of experiments. Chemical, phase and structural properties of SAW fluxes were measured using modern techniques such as X-ray fluorescence (XRF), X-ray diffraction (XRD) & Fourier Transform Infra-red spectroscopy (FTIR). As per the calculated contact angle value, different surface tension values for MgO–TiO2–SiO2 and Al2O3–MgO–SiO2 flux system was calculated using Young's & Boni's equations. Using Dupre's equation the adhesion energy for twenty-one basic fluxes was also calculated. Measured contact angle value increased with increase in the TiO2/MgO & TiO2/Al2O3 flux ratio. Lower contact angle gives higher wettability between the flux and the heating substrate. With increase of TiO2/SiO2 ratio up to 1.5 to 2.0 the calculated surface tension value is decreasing while after that it is increased with increase in TiO2/SiO2 ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Electronic and Structural Properties of Oxides · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Effects of specimen geometry and loading mode on crack growth resistance curves of a high-strength pipeline girth weld10.1016/j.ijpvp.2013.06.003 ↗
2. Sha · 2013 · 1
3. In situ droplet surface tension and viscosity measurements in gas metal arc welding
4. Viscosity and surface tension measurements in microgravity10.1023/A:1022686316437 ↗
5. Dobedoe · 1997
6. Review: preparation, properties and chemistry of glass and glass-ceramic-to-metal seals and coatings10.1007/BF00354689 ↗
7. Surface tension at elevated temperatures. I. Furnace and method for use of the sessile drop method; surface tension of silicon, iron and nickel10.1021/j150504a026 ↗
8. Boundary tension by pendant drops
9. Review on effect of flux composition on its behavior and bead geometry in submerged arc welding10.5897/JMER2013.0284 ↗
10. Anderson · 1974
11. Cornell · 2011
12. Mixture experiments and their applications in welding flux design
13. Investigating the physicochemical and thermophysical properties of submerged arc welding fluxes designed using TiO2-SiO2-MgO and SiO2-MgO-Al2O3 flux systems for line pipe steels10.1016/j.ceramint.2018.10.032 ↗
14. High-temperature wettability and structure of the TiO2–MnO–SiO2–Al2O3 welding flux system
15. A study on the interfacial tension between solid iron and CaO–SiO2–MO system10.1007/s10853-009-3946-1 ↗
16. Effect of Al2O3 and MgO on interfacial tension between calcium silicate-based melts and a solid steel substrate10.1002/srin.201200023 ↗
17. Young · 2007 · 1
18. Surface tension of the molten blast furnace slag bearing TiO2:measurement and evaluation10.2355/isijinternational.54.2154 ↗
19. Estimating ternary surface tension for systems with limited solubility
20. Kekelidze · 1995 · 440
21. Density and surface tension of blast-furnace type slags
22. Wetting and interfacial bonding of metals with ionocovalent oxides10.1111/j.1151-2916.1992.tb04396.x ↗
23. Work of adhesion and contact angle isotherms of binary alloys on ionocovalent oxides10.1007/BF01148806 ↗
24. Wen · ISIJ Int. · 2007 · 47 · 111710.2355/isijinternational.47.1117 ↗
25. Henderson · Can. Mineral. · 2005 · 43 · 192110.2113/gscanmin.43.6.1921 ↗