journal article·2019-06

Characterization of hydroxyapatite-tantalum pentoxide nanocomposite coating applied by electrophoretic deposition on Nitinol superelastic alloy

Nazila Horandghadim, Jafar Khalil-Allafi

Ceramics International· Volume 45· Issue 8
Publisher page

Abstract

Abstract In this study, natural hydroxyapatite (nHA) and nHA-20 wt.%Ta2O5 nanocomposite coatings were deposited via electrophoretic deposition (EPD) on the NiTi substrate. The suspensions of nHA and nHA-Ta2O5 nanoparticles were prepared in n-butanol as a medium with different contents (0, 4, 8, 12, 16, and 20 mL/L) of triethanolamine (TEA) as a dispersant. The most stable suspensions of nHA and nHA-Ta2O5 nanoparticles were achieved with 16 mL/L TEA according to the sedimentation test and zeta potential measurement results. The enhanced colloidal stability of nanoparticles in n-butanol by TEA addition was investigated by FTIR analysis. The highest in-situ EPD kinetics were accomplished from suspensions containing an optimum concentration of dispersant. The phase compositions and microstructures of the coatings, before and after sintering under 1.4 × 10−6 mbar vacuum at 800 °C for 1 h, were perused using XRD and FESEM, respectively. The results of the nano-scratch analysis showed the highest critical distance of delamination (0.38 mm), normal load before failure (133 mN) as well as the critical contact pressure (7.12 GPa) for nHA-Ta2O5 coating on the NiTi. The concentration of the released Ni ions from passivated-NiTi with nHA coating in PBS after 30 days of immersion reduced from 45.72 to 5.62 μg/Lcm2 by introducing Ta2O5 in nHA matrix. On the other hand, the improved corrosion behavior of passivated-NiTi with nHA-Ta2O5 coating in comparison to that of with nHA deposit was explained with the lower amount of open porosities in the microstructure. The biocompatibility of the nHA and nHA-Ta2O5 surfaces were studied by osteoblast cell attachment during 7 days of culturing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrophoretic Deposition in Materials Science · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. Biomimetic deposition of apatite coatings on micro-arc oxidation treated biomedical NiTi alloy10.1016/j.surfcoat.2010.03.044 ↗
2. Improvement in mechanical properties of plasma sprayed hydroxyapatite coatings by Al2O3 reinforcement10.1016/j.msec.2013.03.005 ↗
3. Fabrication, characterization and wear corrosion testing of bioactive hydroxyapatite/nano-TiO2 composite coatings on anodic Ti-6Al-4V substrate for biomedical applications10.1016/j.mseb.2012.03.034 ↗
4. Preparation and characterization of hydroxyapatite/titania composite coating on NiTi alloy by electrochemical deposition10.1016/j.surfcoat.2010.11.049 ↗
5. Suspension plasma spraying of optimized functionally graded coatings of bioactive glass/hydroxyapatite10.1016/j.surfcoat.2013.09.037 ↗
6. Functionally graded hydroxyapatite-alumina-zirconia biocomposite: synergy of toughness and biocompatibility10.1016/j.msec.2012.03.003 ↗
7. Mechanical properties and fractal analysis of the surface texture of sputtered hydroxyapatite coatings10.1016/j.apsusc.2016.04.077 ↗
8. Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol-gel thin coatings on 316L stainless steel pre-coated with titania film10.1016/j.tsf.2015.09.037 ↗
9. Laser processing of net-shape NiTi shape memory alloy10.1007/s11661-007-9127-4 ↗
10. Failure behavior of plasma sprayed HAp coating on commercially pure titanium substrate in simulated body fluid (SBF) under bending load10.1016/j.jmbbm.2012.05.017 ↗
11. Bioactive HA/TiO2 coating on magnesium alloy for biomedical applications10.1016/j.ceramint.2013.11.119 ↗
12. Early bone apposition in vivo on plasma-sprayed and electrochemically deposited hydroxyapatite coatings on titanium alloy10.1016/j.biomaterials.2006.03.034 ↗
13. Mechanical properties of bovine hydroxyapatite (BHA) composites doped with SiO2, MgO, Al2O3 and ZrO210.1007/s10856-007-3200-9 ↗
14. Sintering effect on mechanical properties of composites of bovine hydroxyapatite (BHA) and Li2O10.4028/www.scientific.net/KEM.309-311.49 ↗
15. The effect of varying Al2O3 percentage in hydroxyapatite/Al2O3 composite materials: morphological, chemical and cytotoxic evaluation10.1002/jbm.a.31377 ↗
16. Surface treatment on an implant cobalt alloy for high biocompatibility and wear resistance10.1016/j.wear.2005.02.011 ↗
17. Antibacterial properties and cytocompatibility of tantalum oxide coatings with different silver content10.1116/1.4862543 ↗
18. Tantalum oxide-modified calcium phosphate coatings on titanium for biomedical applications10.1134/S1070427213010229 ↗
19. Experimental and clinical performance of porous tantalum in orthopaedic surgery10.1016/j.biomaterials.2006.04.041 ↗
20. Fabrication and characterization of nanoporous niobia and nanotubular tantala, titania and zirconia via anodization10.3390/jfb6020153 ↗
21. Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite10.1016/j.msec.2013.03.043 ↗
22. Antibacterial properties and cytocompatibility of tantalum oxide coatings10.1016/j.surfcoat.2014.03.061 ↗
23. In vitro bioactivity and corrosion properties of laser beam welded medical grade AISI 316L stainless steel in simulated body fluid10.1016/S1452-3981(23)16139-6 ↗
24. Surface chemistry and cytotoxicity of reactively sputtered tantalum oxide films on NiTi plates10.1016/j.tsf.2015.04.070 ↗
25. Growth and electrochemical stability of compact tantalum oxides obtained in different electrolytes for biomedical applications10.1590/1516-1439.348714 ↗
26. Influence of Ta2O5 doping on the microstructure, physical and mechanical properties of a-alumina ceramics
27. Biocomposites and hybrid biomaterials based on calcium orthophosphates
28. Influence of Ta2O5 doping on mechanical and biological properties of silicate glass-ceramics10.1515/msp-2016-0013 ↗
29. The Study of surface transformation of pulsed laser deposited hydroxyapatite coatings10.1002/(SICI)1097-4636(200005)50:2<239::AID-JBM19>3.0.CO;2-V ↗
30. Hydroxyapatite coatings for biomedical applications deposited by different thermal spray techniques10.1016/j.surfcoat.2010.03.059 ↗
31. The contribution of coating microstructure to degradation and particle release in hydroxyapatite coated prostheses10.1002/jbm.10090 ↗
32. Apatite-forming ability of CaO-containing titania10.1016/S0142-9612(01)00092-8 ↗
33. Electrolytic deposition of magnesium-substituted hydroxyapatite crystals on titanium substrate10.1016/j.matlet.2009.07.048 ↗
34. Morphological stability of hydroxyapatite precursor10.1016/S0167-577X(02)01112-6 ↗
35. Electrophoretic deposition of biomaterials10.1098/rsif.2010.0156.focus ↗
36. Electrophoretic deposition-mechanism, myths and materials10.1023/B:JMSC.0000012906.70457.df ↗
37. Functionally graded HA-TiO2 nanostructured composite coating on Ti-6Al-4V substrate via electrophoretic deposition10.1016/j.surfcoat.2015.01.069 ↗
38. Fabrication and characterization of HAp/Al2O3 composite coating on titanium substrate10.4236/jbise.2008.13032 ↗
39. Effects of zirconia content on characteristics and corrosion behavior of hydroxyapatite/ZrO2 biocomposite coatings codeposited by electrodeposition10.1016/j.surfcoat.2014.12.044 ↗
40. Functionalizing Ti-surfaces through the EPD of hydroxyapatite/nano Y2O310.1021/jp305176h ↗
41. Electrodeposition of composite hydroxyapatite-chitosan films10.1016/j.matchemphys.2005.04.040 ↗
42. Effect of suspension stability on electrophoretic deposition of hydroxyapatite coatings10.1016/j.matlet.2006.01.048 ↗
43. Electrophoretic deposition of hydroxyapatite submicron particles at high voltages10.1016/j.matlet.2003.09.024 ↗
44. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
45. Effects of applied voltages on hydroxyapatite coating of titanium by electrophoretic deposition10.1002/jbm.b.30497 ↗
46. Application of electrophoretic and electrolytic deposition techniques in ceramics processing10.1016/S1359-0286(02)00080-3 ↗
47. Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition10.1016/j.surfcoat.2007.09.031 ↗
48. Electrophoretic deposition of hydroxyapatite coatings on titanium from dimethylformamide suspensions10.1016/j.surfcoat.2011.06.034 ↗
49. Studying Surface charge and suspension stability of hydroxyapatite powder in isopropyl alcohol to prepare stable suspension for electrophoretic deposition10.1179/174367608X353647 ↗
50. The influence of pH on particle packing in YSZ coatings electrophoretically deposited from a non-aqueous suspension10.1016/j.jeurceramsoc.2009.07.021 ↗
51. Electrostatic and sterical stabilization of TiO2 dispersions10.1021/la00002a010 ↗
52. Electrophoretic deposition of calcium phosphates from non-aqueous media10.1016/0927-7757(93)80198-N ↗
53. Izutsu · 2009
54. Electrophoretic deposition of carbon nanotubes-hydroxyapatite nanocomposites on titanium substrate10.1016/j.msec.2010.05.007 ↗
55. Hydroxyapatite electrodeposition on anodized titanium nanotubes for orthopedic applications10.1016/j.apsusc.2014.04.207 ↗
56. Mechanical performance of apatite/TiO2 composite coatings formed on Ti and NiTi shape memory alloy10.1016/j.apsusc.2008.06.070 ↗
57. Development of electrophoretically deposited hydroxyapatite coatings on anodized nanotubular TiO2 structures: corrosion and sintering temperature10.1016/j.apsusc.2014.02.055 ↗
58. Surface treatment of NiTi for medical applications10.1080/13645700410020278 ↗
59. Influence of acidity on the electrostatic stability of alumina suspensions in ethanol10.1111/j.1151-2916.1997.tb02928.x ↗
60. Kosmulski · 2009
61. Influence of solvation interactions on the zeta potential of titania powders10.1016/S0021-9797(03)00195-4 ↗
62. Surface structure and molecular adsorption of apatites10.1016/S0167-2991(06)81025-6 ↗
63. FTIR and TPD studies on the adsorption of pyridine, n-butylamine and acetic acid on calcium hydroxyapatite10.1039/a705896i ↗
64. Synowczynski · 2007
65. Characterisation of carbon nanotube films deposited by electrophoretic deposition10.1016/j.carbon.2008.08.028 ↗
66. The effect of electrolyte conductivity on electrophoretic deposition10.1016/j.jcis.2008.09.022 ↗
67. Electrophoretic deposition of hydroxyapatite10.1023/A:1018587623231 ↗
68. Electrophoretic deposition for coatings and free standing objects10.1023/B:JMSC.0000012905.62256.39 ↗
69. Synthesis, characterization and electrical properties of hydroxyapatite nanoparticles from utilization of biowaste eggshells
70. Electrical and optical characteristics of Ta2O5 thin films deposited by electron-beam vapor deposition10.1002/ppap.200500110 ↗
71. Deposition and packing study of sub-micron PZT ceramics using electrophoretic deposition10.1016/S0167-577X(02)00602-X ↗
72. Electrophoretic deposition of coatings from glass-isopropanol slurries
73. Phase relations in the system Ca-Ta-O and thermodynamics of calcium tantalates in relation to calciothermic reduction of Ta2O510.1016/j.jallcom.2014.09.123 ↗
74. In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite10.1016/S1003-6326(14)63378-1 ↗
75. Using scratch testing to measure the adhesion strength of calcium phosphate coatings applied to poly(carbonate urethane) substrates10.1016/j.jmbbm.2011.10.010 ↗
76. Nanoindentation response of novel hydroxyapatite–mullite composites10.1016/j.msea.2009.02.052 ↗
77. Micro-scratch and corrosion behavior of functionally graded HA-TiO2 nanostructured composite coatings fabricated by electrophoretic deposition10.1016/j.jmbbm.2015.02.021 ↗
78. The effect of titanium dioxide (TiO2) nanoparticles on hydroxyapatite (HA)/TiO2 composite coating fabricated by electrophoretic deposition (EPD)10.1007/s11665-018-3342-6 ↗
79. Mechanics and electrostatics of the interactions between osteoblasts and titanium surface10.1080/10255842.2010.534986 ↗
80. A new biphasic osteoinductive calcium composite material with a negative zeta potential for bone augmentation
81. Protein adsorption and cellular uptake of cerium oxide nanoparticles as a function of zeta potential10.1016/j.biomaterials.2007.07.029 ↗
82. Surface charge characteristics of hydroxylapatite and fluorapatite10.1038/239515a0 ↗
83. Attraction between negatively charged surfaces mediated by spherical counterions with quadrupolar charge distribution10.1063/1.2972980 ↗