Influence of phase composition on thermal aging behavior of plasma sprayed ytterbium silicate coatings
Source abstract
Abstract
Abstract In this study, ytterbium silicate coatings with different phase compositions were designed by controlling Yb2O3/SiO2 ratio and fabricated by atmospheric plasma spray (APS) technique. Thermal aging behaviors such as microstructure evolution and thermomechanical properties were focused, and the influence of phase composition was analyzed. Results showed that obvious grain growth and defect reduction occurred, and the thermomechanical properties were significantly modified after thermal aging. The larger reduction in defects and greater increase in elastic modulus, Vickers hardness and coefficient of thermal expansion took place in the Yb2O3-rich coatings containing Yb2O3 and Yb2SiO5 phases. The bigger grains and transgranular cracks were formed and the greater increase in thermal conductivity took place in the SiO2-rich coatings containing Yb2SiO5 and Yb2Si2O7 phases. The relationship among microstructure evolution and variation of thermomechanical properties was analyzed. The results of this study may provide a reference for design and application of rare-earth silicates as environmental barrier coatings (EBCs).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Silicon nitride for gas turbines10.1016/S1359-0286(00)00032-2 ↗
2. High temperature strength and oxidation behavior of hot-pressed silicon nitride-disilicate ceramics10.1023/A:1018581529225 ↗
3. C/C-SiC composites for space applications and advanced friction systems10.1016/j.msea.2005.08.204 ↗
4. SiC and Si3N4 recession due to SiO2 scale volatility under combustor conditions10.1163/156855199X00056 ↗
5. Corrosion of silicon nitride materials in gas turbine environment10.1016/S0955-2219(02)00143-7 ↗
6. Accelerated oxidation of SiC CMC's by water vapor and protection via environmental barrier coating approach10.1016/S0955-2219(02)00141-3 ↗
7. Current status of environmental barrier coatings for Si-Based ceramics
8. Upper temperature limit of environmental barrier coatings based on mullite and BSAS10.1111/j.1151-2916.2003.tb03466.x ↗
9. Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics10.1016/j.jeurceramsoc.2004.12.013 ↗
10. Rare earth silicate environmental barrier coatings: present status and prospective10.1016/j.ceramint.2017.01.153 ↗
11. Investigation on the preparation of Si/mullite/Yb2Si2O7 environmental barrier coatings onto silicon carbide10.1016/S1002-0721(09)60120-4 ↗
12. Theoretical prediction and experimental investigation on the thermal and mechanical properties of bulk β-Yb2Si2O710.1111/jace.12618 ↗
13. Preparation and molten salt corrosion research of composite environmental barrier coatings of Lu2Si2O7 and Lu2SiO510.1179/1432891714Z.000000000874 ↗
14. Mechanical and thermal properties of Yb2SiO5: first-principles calculations and chemical bond theory investigations10.1557/jmr.2014.201 ↗
15. Thermal cycling behavior and hot corrosion performance of the plasma sprayed Er2Si2O7 coatings deposited on Cf/SiC composites10.1016/j.jascer.2014.12.001 ↗
16. Refractory oxide coatings on SiC ceramics10.1557/S088376940004820X ↗
17. Fundamental studies associated with the plasma spray process10.1016/0257-8972(88)90083-7 ↗
18. The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings10.1016/0040-6090(81)90633-7 ↗
19. Plasma spraying modeling: particle injection in a time-fluctuating plasma jet10.1016/j.surfcoat.2008.04.028 ↗
20. Plasma spray deposition of tri-layer environmental barrier coatings10.1016/j.jeurceramsoc.2014.04.027 ↗
21. Mechanisms of ytterbium monosilicate/mullite/silicon coating failure during thermal cycling in water vapor10.1111/jace.13792 ↗
22. Microstructure evolution and thermomechanical properties of plasma-sprayed Yb2SiO5 coating during thermal aging10.1111/jace.14690 ↗
23. Microstructure and thermal properties of atmospheric plasma-sprayed Yb2Si2O7 coating10.1007/s11666-016-0482-9 ↗
24. Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor10.1016/j.actamat.2015.12.053 ↗
25. Ablation behavior of Y2SiO5/SiC coating for C/C composites under oxyacetylene torch10.1016/j.corsci.2014.07.008 ↗
26. Effect of the starting microstructure on the thermal properties of As-sprayed and thermally exposed plasma-sprayed YSZ coatings10.1111/j.1551-2916.2009.02953.x ↗
27. The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBCs10.1016/S1359-6454(01)00065-9 ↗
28. Thermal aging behavior of axial suspension plasma-sprayed Yttria-Stabilized Zirconia (YSZ) thermal barrier coatings10.1007/s11666-014-0206-y ↗
29. Thermal aging behavior of plasma sprayed LaMgAl11O19 thermal barrier coating10.1016/j.jeurceramsoc.2011.05.036 ↗
30. Effects of heat treatment on the microstructure and microplastic deformation behavior of SiC particles reinforced AZ61 magnesium metal matrix composite10.1016/j.msea.2017.11.020 ↗
31. Investigation of the crystallinity of suspension plasma sprayed hydroxyapatite coatings10.1016/j.jeurceramsoc.2017.07.007 ↗
32. Microstructure and mechanical properties of La2Zr2O7–(Zr0.92Y0.08)O1.96 composite ceramics prepared by spark plasma sintering10.1016/j.ceramint.2014.05.121 ↗
33. High-temperature performance of alumina-zirconia composite coatings containing amorphous phases10.1002/adfm.201100471 ↗
34. Scattering of thermal phonons by low-angle grain boundaries in LiF and NaCl10.1103/PhysRevB.17.3356 ↗