journal article·2014-01

Wear and friction behavior of self-lubricating alumina–zirconia–fluoride composites fabricated by the PECS technique

Seung-Ho Kim, Soo Wohn Lee

Ceramics International· Volume 40· Issue 1
Publisher page

Abstract

Abstract This study examined the wear and friction behavior of pulse electric current sintered Al 2 O 3 –ZrO 2 composites containing such fluorides as CaF 2 and BaF 2 . The dry sliding wear and friction properties against a commercial alumina bearing ball were investigated using a reciprocal ball-on-plate tribometer. The coefficient of friction of the fluoride-containing Al 2 O 3 –ZrO 2 composites decreased by approximately 10–20% compared with that of the matrix composite. The wear rate of the fluoride-containing Al 2 O 3 –ZrO 2 composites was determined to be lower than that of the matrix composite. The following wear rates were observed herein: 0.53×10 −6 mm 3 /m N (CaF 2 and low weight fraction of BaF 2 ), 11.41–45.05×10 −6 mm 3 /m N (high weight fraction of BaF 2 ), and 168.17×10 −6 mm 3 /m N (matrix composite). Furthermore, different friction coefficients were observed for the reciprocal sliding test compared with the scratch test due to a difference in the fracture behavior. Because the scratch test employed unidirectional motion, it did not involve fracture behavior due to fatigue or repeated contact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Van Vlack · 1990
2. Schwartz · 1997
3. SiC platelet reinforced Al2O3 composites by free sintering of coated powders10.1002/9780470314555.ch14 ↗
4. SiC-whisker-reinforced Al2O3 composites by free sintering of coated powder10.1111/j.1151-2916.1993.tb03980.x ↗
5. New design concept of structural ceramics: ceramic nanocomposites10.2109/jcersj.99.974 ↗
6. Synthesis and microstructural characterization of α-Al2O3–t-ZrO2 composite powders prepared by combustion technique10.1016/j.msea.2007.02.078 ↗
7. Transformation and microcrack toughening as complementary processes in ZrO2-toughened Al2O310.1111/j.1151-2916.1986.tb07405.x ↗
8. Myshkin · 1997
9. Effects of different additives on microstructure and high-temperature tribological properties of plasma-sprayed Cr2O3 ceramic coatings10.1016/S0043-1648(01)00530-0 ↗
10. The synergistic effects of CaF2 and Au lubricants on tribological properties of spark-plasma-sintered ZrO2(Y2O3) matrix composites10.1016/S0921-5093(04)00965-7 ↗
11. The influence of TiC, CaF2 and MnS additives on friction and lubrication of sintered high speed steels at elevated temperature10.1016/0043-1648(95)06652-7 ↗
12. Low-pressure plasma-sprayed ZrO2–CaF2 composite coating for high temperature tribological applications10.1016/S0257-8972(00)00918-X ↗
13. Spark-plasma-sintered ZrO2(Y2O3)–BaCrO4 self-lubricating composites for high temperature tribological applications10.1016/j.ceramint.2004.06.020 ↗
14. High-temperature tribological properties of Al2O3, Ni-20mass% Cr and NiAl spark-plasma sintered composites containing BaF2–CaF2 phase10.1016/j.wear.2004.12.019 ↗
15. Effects of the sliding conditions on the tribological behavior of atmospheric plasma sprayed Al2O3-15wt% ZrO2–CaF2 composite coating10.1016/j.surfcoat.2012.09.003 ↗
16. Microstructure and tribological properties of pulsed electric current sintered alumina–zirconia nanocomposites with different solid lubricants10.1016/j.ceramint.2012.08.065 ↗
17. Effects of different solid lubricants on mechanical and tribological properties of Al2O3/ZrO2 nanocomposites10.4028/www.scientific.net/MSF.658.404 ↗
18. Pulsed electric current sintering of the Al2O3-15wt% ZrO2 nanocomposites with 3wt% of different solid lubricants10.4028/www.scientific.net/MSF.695.473 ↗
19. Grain-size and R-curve effects in the abrasive wear of alumina10.1111/j.1151-2916.1989.tb09718.x ↗
20. Effects of whisker distribution and sintering temperature on friction and wear of Si3N4-whisker-reinforced Si3N4-composites10.1016/S0043-1648(99)00058-7 ↗
21. Influence of fracture toughness on the wear resistance of ytrria-doped zirconium oxide10.1111/j.1151-2916.1989.tb06110.x ↗
22. Friction and wear of silicon nitride lubricated by humid air, water, hexadecane and hexadecane +0.5 percent stearic acid10.1080/10402008808981795 ↗
23. Simulation of thermal and electric field evolution during spark plasma sintering10.1016/j.ceramint.2008.02.013 ↗
24. Pulse electric current sintering of Al2O3/3 vol% ZrO2 with constrained grains and high strength10.1111/j.1151-2916.2002.tb00548.x ↗
25. Development of nanocrystalline wear-resistant Y-TZP ceramics10.1111/j.1551-2916.2004.01771.x ↗
26. Pulsed electric current sintering of silicon nitride10.1111/j.1151-2916.2003.tb03310.x ↗